explosion protection Equipment in France

Serving France | Office in FranceNear France
88 Results found
  • Category: Health & Safety ×

  • Subcategory: Fire Safety ×

  • Keyword: explosion protection ×

  • Location: Europe ×

  • Location: France ×

HazPak - Model CAT C4.4 NA - Explosion Protection Engine

by Pyroban Ltd     based in West Sussex, UNITED KINGDOM

The C4.4 NA HazPak is a naturally aspirated explosion protection engine designed for safe use in ATEX Zone 2 hazardous locations with its Gas Group IIA and T3 Temperature class certification. This explosion protection engine provides up to 86 brake horsepower at 2200rpm and is suitable for a range of well service applications such as compressor ...

Model NFPA 6 - Explosion Protection

by IEP Technologies     based in Marlborough, MASSACHUSETTS (USA)

NFPA 68: Standard on Explosion Protection by Deflagration Venting products offered by IEP Technologies. Deflagration is acombustion that propagates through a gas or along the surface of an explosive at a rapid rate driven by the transfer of heat.  IEP Technologies are designed to comply with NFPA 68 and to detect and contain explosions from ...

Explosion Protection Valve

by ATEX Brand- und Explosionsschutz GmbH     based in Moehnesee, GERMANY

The explosion protection valve prevents the dust explosion from expanding beyond the place where it is fitted. The valve acts as a flame barrier at the same time. In the event of an explosion, the valve detects the event through the kinetic energy preceding the pressure wave, and closes of the affected area. It is primarily used in clean air ...

Model BL-100 - Lightning Protection Device

by E.L.B. Füllstandsgeräte Bundschuh GmbH & Co. KG     based in Bensheim, GERMANY

This lightning protection device gives coarse protection, which limits overvoltages on the signal lines caused through atmospheric influences or interference of electromagnetic fields (lightning strokes) to a certain value, so that no ignition through flash-over can occur within the explosive atmosphere.

Model Type CARZ - Back Pressure Flap

by Cattin Filtration     based in Pont-de-Roide, FRANCE

The CARZ is designed to prevent the effects of a pressure wave and flame front, arising from an explosion downstream, from traveling back along the duct into which it is fitted. It is effective up to a maximum declared reduce explosion pressure within the protected enclosure (typically ATEX 20) and acts as an isolating valve during the explosive ...

Model Diverter Type Deviatex - Duct Protection System

by Cattin Filtration     based in Pont-de-Roide, FRANCE

The DEVIATEX is a protection system fitted into a duct system that disconnects the two sides in the event of an explosive rise in pressure on either side of the device. In the event of an explosion in a filter or silo-type enclosure connectedto ducting, a pressure wave, which always precedes the flame front, can spread along ducts up to the ...

Model BS 7 - Spark Detection & Extinguishment Systems

by GreCon Greten GmbH & Co. KG     based in Alfeld-Hannover, GERMANY

GreCon introduces interesting innovations in the detection, extinguishment and operation of their BS 7 spark extinguishing system in the area of preventive fire protection. The new products include the Hot Particle Detector HPD 1/8 for the detection of hot particles as well as Thermo Sensor TM 1/9 for the detection of ...

ATEX - TV Explosion Door

by ATEX Explosion Hazards Ltd.     based in Lymm, UNITED KINGDOM

The TV Explosion Door from ATEX is a high performance explosion venting solution for aggressive environments. It provides economical explosion relief and prevents secondary fire damage from oxygen intake by rapidly re-closing after the explosion is vented. We also offer a light weight door for building protection.

Hygienic Explosion Vent

by Elfab Limited     based in North Shields, UNITED KINGDOM

Dusty conditions commonly associated with the storage and handling of grains and powders can potentially lead to dangerous explosions. Within the food-processing, beverage and pharmaceutical sectors, ensuring that the explosion protection solution is also suitable for sanitary applications is an added consideration. The specially designed ...

UV Flame Detector

by Fireguard Safety Equipment Co Ltd.     based in Willenhall, UNITED KINGDOM

FIREGUARD’S ultra-violet (UV) flame detector delivers protection you can trust-the protection you need! The detector reacts to the UV radiation found in hydrocarbon fires, delivering accurate and reliable fire monitoring. Its smart sensor technology even detects hard to see hydrogen, ammonia and sulphur fires. As an added advantage, the UVS ...

Need help finding the right suppliers?

Let the XPRTs do the work for you