explosion protection Equipment in Vatican City

Serving Vatican City | Near Vatican City
56 Results found
  • Category: Health & Safety ×

  • Subcategory: Fire Safety ×

  • Keyword: explosion protection ×

  • Location: Europe ×

  • Location: Vatican City ×

Model NFPA 6 - Explosion Protection

by IEP Technologies     based in Marlborough, MASSACHUSETTS (USA)

NFPA 68: Standard on Explosion Protection by Deflagration Venting products offered by IEP Technologies. Deflagration is acombustion that propagates through a gas or along the surface of an explosive at a rapid rate driven by the transfer of heat.  IEP Technologies are designed to comply with NFPA 68 and to detect and contain explosions from ...

Explosion Protection Valve

by ATEX Brand- und Explosionsschutz GmbH     based in Moehnesee, GERMANY

The explosion protection valve prevents the dust explosion from expanding beyond the place where it is fitted. The valve acts as a flame barrier at the same time. In the event of an explosion, the valve detects the event through the kinetic energy preceding the pressure wave, and closes of the affected area. It is primarily used in clean air ...

Model BS 7 - Spark Detection & Extinguishment Systems

by GreCon Greten GmbH & Co. KG     based in Alfeld-Hannover, GERMANY

GreCon introduces interesting innovations in the detection, extinguishment and operation of their BS 7 spark extinguishing system in the area of preventive fire protection. The new products include the Hot Particle Detector HPD 1/8 for the detection of hot particles as well as Thermo Sensor TM 1/9 for the detection of ...

Hygienic Explosion Vent

by Elfab Limited     based in North Shields, UNITED KINGDOM

Dusty conditions commonly associated with the storage and handling of grains and powders can potentially lead to dangerous explosions. Within the food-processing, beverage and pharmaceutical sectors, ensuring that the explosion protection solution is also suitable for sanitary applications is an added consideration. The specially designed ...

ATEX - Nozzle Systems

by ATEX Brand- und Explosionsschutz GmbH     based in Moehnesee, GERMANY

ATEX offers a variety of nozzle systems, so that the required functionality of the explosion suppres-sion pressure system can be ensured in each individual case. The choice of the right system, however, is always made in the light of the particular process concerned. The ATEX nozzle systems are particu-larly used in fields where hygienic ...

Explosion Diverter

by ATEX Explosion Hazards Ltd.     based in Lymm, UNITED KINGDOM

The TV Explosion Diverter from Atex is a mechanical explosion isolation device which protects ductwork and attached vessels by venting flame and pressure to a safe area.

Model 3121 SRE - Explosion Vents

by CV Technology, Inc.     based in Jupiter, FLORIDA (USA)

Explosion vents offer a passive and economical means of explosion mitigation.  Each explosion vent is precisely designed to burst at a given pressure to maintain the structural integrity of the protected equipment. Vents come in a variety of dimensions and models.  The CV Technology standard vent is our TLFG model. The TLFG explosion ...

Model Type CARZ - Back Pressure Flap

by Cattin Filtration     based in Pont-de-Roide, FRANCE

The CARZ is designed to prevent the effects of a pressure wave and flame front, arising from an explosion downstream, from traveling back along the duct into which it is fitted. It is effective up to a maximum declared reduce explosion pressure within the protected enclosure (typically ATEX 20) and acts as an isolating valve during the explosive ...

Model Diverter Type Deviatex - Duct Protection System

by Cattin Filtration     based in Pont-de-Roide, FRANCE

The DEVIATEX is a protection system fitted into a duct system that disconnects the two sides in the event of an explosive rise in pressure on either side of the device. In the event of an explosion in a filter or silo-type enclosure connectedto ducting, a pressure wave, which always precedes the flame front, can spread along ducts up to the ...

Interceptor - Model 3115 HRD 8L-20L-50L - Explosion Suppression System

by CV Technology, Inc.     based in Jupiter, FLORIDA (USA)

The Interceptor-HRD explosion suppression system is designed to provide an active method to protect process equipment from a dust explosion hazard.  The principle of operation for the Interceptor-HRD system is timely detection of the pressure rise during the initial stage of an explosion, followed by fast injection of an extinguishing agent.

Need help finding the right suppliers?

Let the XPRTs do the work for you