fire detection Equipment in Algeria

Serving Algeria | Near Algeria
53 Results found
  • Category: Health & Safety ×

  • Subcategory: Fire Safety ×

  • Keyword: fire detection ×

  • Location: Africa ×

  • Location: Algeria ×

Model BS 7 - Spark Detection & Extinguishment Systems

by GreCon Greten GmbH & Co. KG     based in Alfeld-Hannover, GERMANY

GreCon introduces interesting innovations in the detection, extinguishment and operation of their BS 7 spark extinguishing system in the area of preventive fire protection. The new products include the Hot Particle Detector HPD 1/8 for the detection of hot particles as well as Thermo Sensor TM 1/9 for the detection of ...

SigniFire - Model IP - Video Flame and Smoke Detection Camera

by Fike     based in Blue Springs, MISSOURI (USA)

SigniFire IP Video Smoke detection camera, combines the enhanced resolution and picture clarity of a standard network camera with built-in fire, smoke and motion detector capabilities. The detection events are instantly reported to the Digital Video Management (DVM) system over a standard network connection and/or communicated directly to the ...

Model FSM-IP - Network Video Smoke and Flame Detection Recorder

by Fike     based in Blue Springs, MISSOURI (USA)

A scalable, network video recorder with video management software, each FSM-IP is designed to support up to 32 SigniFire IP network, flame detecting cameras: Constantly records video streams onto internal hard disk. Customizable storage space to meet application needs. Provides monitoring of live videos. With the scalable FSM-IP, multiple servers ...

Aloa - Detection of Fire Risks

by ALOATEC     based in Calais, FRANCE

The solution aloa_DETECT Fire monitors large areas using thermal imaging cameras and visible cameras. This system finds application in the repair of gas-powered buses, in municipal waste incinerators and more generally in any unit where the cost of fire risk needs to ensure the best protection possible. An unexpected hot spot is immediately ...

Low Pressure CO2 Systems

by TOMCO2 Systems     based in Loganville, GEORGIA (US) (USA)

Carbon dioxide, the original clean agent system, is the most common and effective non-water fire extinguishing medium. In addition to being economical and leaving no residue, CO2 is effective on a wide range of hazardous materials. Two primary methods of CO2 storage include low pressure and high pressure CO2 systems. The custom low pressure fire ...

Simtronics MultiFlame - Model DF-TV7-T - Multi-spectrum Flame Detector

by Simtronics SAS     based in Oslo, NORWAY

The Simtronics DF-TV7–T is a multi-spectrum infrared flame detector using three wavelengths. DF-TV7-3IR responds to hydrocarbon fires and is the right choice for operation in dirty environments or for detection of smoky fires.

Model PSD-7157 and PSD-7157D - Advanced Photoelectric Smoke Detectors

by Kidde-Fenwal Inc.     based in Ashland, MASSACHUSETTS (USA)

The PSD-7157 and PSD-7157D Photoelectric Smoke Detectors respond to a broad spectrum of both flaming and smoldering fire conditions. The detectors have advanced solid-state, low-voltage, surface-mount circuitry and are designed for 2-wire and 4-wire installation using the appropriate detector base. The characteristic 360-degree detector design ...

Det-Tronics - Model U5005 - Smoke Detector

by Det-Tronics - Detector Electronics Corporation     based in Bloomington, MINNESOTA (USA)

The U5005 Smoke Detector is a sensitive, yet rugged, state-of-the-art protection device that is designed for classified areas in hazardous industrial and commercial locations. The detector is designed to operate effectively with both slow smoldering and fast-burning fires. Includes an external alarm indicating LED and one set of normally open ...

Dual Spectrum - Model PM-5MPX - Infrared Flame Detector

by Det-Tronics - Detector Electronics Corporation     based in Bloomington, MINNESOTA (USA)

The Det-Tronics PM-5MPX Dual Spectrum flame detector is optimized for the rigorous semiconductor fabrication industry, which is beset with many hazards that result in stringent requirements for fire protection safety systems. Flame detection requirements for this industry are specific: Factory Mutual Approvals (FM) addresses the detailed specific ...

Model DH-60 - Air Duct Smoke Detector

by Kidde-Fenwal Inc.     based in Ashland, MASSACHUSETTS (USA)

The DH-60 Series Duct Detectors are suited for use with HVAC systems in commercial, industrial and institutional fire alarm applications. The DH-60 is easily mounted to both rectangular and round ducts from 8 inches (200 mm) to 12 feet (3.6 m) wide and is compatible with all ducts with air velocities between 500 and 4000 feet per minute (2.5 to 20 ...

Need help finding the right suppliers?

Let the XPRTs do the work for you