total mercury Equipment in Alabama

Served | Office inNear
16 Results found
  • Category: Health & Safety ×

  • Subcategory: Mercury in the Environment ×

  • Keyword: total mercury ×

  • Location: USA ×

  • Location: Alabama ×

MERX - Model EPA 1631 - Automated Total Mercury Configuration System

by Brooks Rand Labs, LLC     based in Seattle, WASHINGTON (USA)

At Brooks Rand, we firmly believe that obtaining the highest quality data is essential, but also recognize the necessity of operational efficiency. Our decades of trace level mercury analysis experience have enabled us to develop a system that achieves both of these critical goals.

Method 30B Unspiked Sorbent Traps for Total Mercury Testing

by Ohio Lumex Co., Inc.     based in Twinsburg, OHIO (USA)

Method 30B Sorbent Traps are available for evaluations and RATA. These 6mm or 10mm extra durable 2-section sorbent traps are typically used from a few hours to one day sampling and can be used when pulling up to 2 liters per minute flow. Method 30B is a procedure for measuring total vapor phase mercury (Hg) emissions from coal-fired combustion ...

DURAGRATE - Model HM-1400 TRX - Total Mercury Analyzer System

by DURAG GmbH     based in Hamburg, GERMANY

Extractive Automatic Measuring System (AMS) for continuous total mercury monitoring (CMM) in stack gas or process gas.

Model Amesa M - AMESA-M: Sorbent Trap Mercury Sampler (Hg)

by Environnement S.A     based in Poissy, FRANCE

•Automatic and continuous stack mercury sampler•Measuring range (total mercury): 0.001 – 1000 μg/ m³•Meets the US EPA Performances Standard 12 B mentioned in the US Portland Cement Rules and the new MATS (Mercury and Air Toxics Standards)Applications:•Cement Kilns•Power Plants•Biomass•Industrial Boilers•Incinerators...

Gasmet - Continuous Mercury Monitor (CMM)

by Gasmet Technologies Oy     based in Helsinki, FINLAND

The Gasmet™ CMM (Continuous Mercury Monitor) is designed for continuous & unattended monitoring of total mercury (Hg) in flue gas. The Gasmet CMM utilizes Cold Vapor Atomic Fluorescence (CVAF) measurement technology which is specific to mercury. Hence there is virtually no interference from SO2 or HCl. The Gasmet sampling unit is also ...

Mercury UltraTracer - Model UT 3000 - Gaseous Detector

by Mercury Instruments USA     based in Littleton, COLORADO (USA)

Measurement of Total Gaseous Mercury in Air or Other Gases at Ultratrace Levels (ppq - parts per quadrillion). Atomic Absorption with Proprietary MI GoldTrap technology. Advanced AA photometer with stabilized Hg EDL lamp. Display of real-time signal reading. Display of results in bar graph. Data Logger. Exports data to PC. Optional Auto-Calibrate. ...

Mercury - Model VM-3000 - Vapor Detector

by Mercury Instruments USA     based in Littleton, COLORADO (USA)

The VM-3000 Mercury Vapor Monitor measures the elemental mercury vapor concentration in air and other gases continuously. It is used in the laboratory or can be installed at places where mercury has to be monitored. Industry people use the VM 3000 Mercury Sniffer as well as university researchers or safety people. It is a great tool for plenty of ...

Mercury Sorbent Traps

by Apex Instruments, Inc.     based in Fuquay-Varina, NORTH CAROLINA (USA)

PS 12B specifies sampling, and analytical, and quality-assurance criteria and procedures for the performance-based monitoring of vapor-phase mercury (Hg) emissions in combustion flue gas streams, using a sorbent trap monitoring system. The principle employed is continuous sampling using in-stack sorbent media coupled with analysis of the ...

MercSampler - Model XC-6000EPC-W - Automated Sorbent Trap Monitoring System

by Apex Instruments, Inc.     based in Fuquay-Varina, NORTH CAROLINA (USA)

The automated XC-6000 EPC MercSampler for Sorbent Trap Monitoring Systems is designed for continuous dual sampling of vapor-phase mercury emissions from stationary combustion sources, in accordance with the U.S. EPA MATS published in 40 CFR, Part 60-63, Appendix A, Subpart UUUUU and is MATS compliant. Performance Specification 12B: Specifications ...

Tekran - Model 1130 - Oxidized Mercury Speciation Module

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

Tekran offers the only system in the world capable of performing automated mercury speciation determinations. The Tekran 1130 is designed to seamlessly integrate with a Tekran 2537 analyzer. With a control module and collection (denuder) module, the Tekran 1130 allows separation and pre-concentration of gaseous oxidized mercury (GOM) species on an ...

Need help finding the right suppliers?

Let the XPRTs do the work for you