Noise Monitoring Equipment in Rhode Island

Serving Rhode Island | Office in Rhode IslandNear Rhode Island
230 Results found
  • Category: Health & Safety ×

  • Subcategory: Noise Monitoring ×

  • Location: USA ×

  • Location: Rhode Island ×

Model AEK-2002 - Acoustic Enclosure

by Herzan LLC     based in Laguna Hills, CALIFORNIA (USA)

Herzan's Most Popular SPM Enclosure! The AEK-2002 is Herzan's best selling acoustic enclosure to date, supplying AFM manufacturers and users with the perfect combination of high quality design and high performance acoustic isolation. With numerous premium features that come standard with every AEK-2002, additional customizable options can be ...

Environmental & Airport Noise Monitors

by Cirrus Research plc     based in Hunmanby, UNITED KINGDOM

Cirrus Research plc has a range of Permanent and Portable Noise Monitors, Sound Level Meters and Noise Measurements systems that can be used for the measurement and monitoring of environmental noise.

Kits for Environmental Noise Monitoring

by Castle Group Ltd.     based in North Yorkshire, UNITED KINGDOM

Meters and kits designed for use in environmental health monitoring, including noise meters, vibration meters, gas detectors and air sampling equipment. Environmental Health is a wide ranging aspect of health and safety, covering natural and man-made environments that can have a serious affect on health. The importance of environmental health has ...

Quest Technologies - Model eg4 - Personal Noise Dosimeter

by US Environmental Rental Corporation     based in Waltham, MASSACHUSETTS (USA)

As the market leader in noise dosimeters, we designed the most innovative cable-free dosimeter on the market. Weighing only 2.4ozs/69g, it conforms to the worker’s body for superior comfort. The Edge eg4 advanced model has dual dosimeters and datalogging/time history. The intuitive buttons on the instrument allow you to easily run, navigate ...

Model NMrt Sound-Level Meter - NoiseMapper-RT

by Geonica SA     based in Madrid, SPAIN

The NoiseMapper-RT (Remote Terminal) equipment is a standalone operating remote terminal (sound-level meter), appropriate for both outdoor and indoor installation, designed by GEONICA for continuously measuring ambient noise.

SoundEar - Model II - Noise Monitoring Equipment

by SoundEar A/S     based in Copenhagen, DENMARK

Many hospital patients complain about too much noise. This includes noise from medical equipment, staff and visitors, closing doors etc. Research has shown that noise levels above 50 dB(A) delay recovery and rehabilitation periods, thereby causing patients to stay for an unnecessary, longer period of time due to bad acoustic and sound environments ...

SoundBuster - Noise Monitoring Equipment

by SoundEar A/S     based in Copenhagen, DENMARK

The relay, that when used together with SoundEarII,can be used to control any hi-fi systems, lights etc.connected to it.SoundBuster can either disconnect or connect the powersupply when the preset noise limit on the SoundEar IIis exceeded.

SoundEar - Model V - Noise Monitoring Equipment

by SoundEar A/S     based in Copenhagen, DENMARK

Virtual SoundEar for open-plan offices and call-centres.SoundEarV is a little noisemeter that measures the sound level in the area around the desk. When the noise around the desk becomes too loud, a pop-up warning appears on the employee's screen. Attach the noisemeter to the side of the computer screen and connect to the USB-port (see picture). ...

PocketEar - Noise Monitoring Equipment

by SoundEar A/S     based in Copenhagen, DENMARK

PocketEar – a pocket-size noisemeter, tells you about the noise level you are exposed to.Take PocketEar out of your pocket and check the noise level. If it is too high, the PocketEar lights up yellow then red.If the device lights up red, then help is right at hand - open PocketEar up and inside you will find a pair of good quality ear plugs ...

Monitran - Model MTN/2285IW - Intrinsically Safe Submersible Velocity Transducer 4‐20mA

by Monitran Ltd     based in Penn, UNITED KINGDOM

ATEX and IECEx Group II certified. Submersible, general purpose, top-entry velocity transducer with DC output. Made from robust stainless steel throughout for continuous vibration monitoring in harsh underwater environments and areas with constant moisture or condensation. Internal electronics are enclosed in a Faraday cage and isolated to ...

Need help finding the right suppliers?

Let the XPRTs do the work for you