Noise Pollution Equipment in Kenya

642 Results found
  • Category: Health & Safety ×

  • Subcategory: Noise Pollution ×

  • Location: Africa ×

  • Location: Kenya ×


EUROPELEC - SOFIE - High-performance Submerged Turbine Aerator

by EUROPELEC

The SOFIE is Europelec's high-performance submerged turbine aerator and/or mixer with a vertical shaft and is designed to mix and transfer oxygen in waste water as efficiently as possible. The solidly-built components have been selected to guarantee a long life with a reduced maintenance. The SOFIE consists mainly of stainless steel blades rotor ...


Hadron - HE Series - Blowing Set

by Hadron Engineering Ltd.

The standard packages cover a wider array of blowers than its smaller brother the compact range. Air flows are available from 20m3/h, all the way up to 10,000m3/h at pressures up to 1 bar. The units incorporate a unique belt tensioning system, where the downward weight of the electric motor is used to apply the correct tension to the belt drives ...

Noise Tutor NMS Rapid Deployment Noise Monitoring System

by Larson Davis, a division of PCB Piezotronics

Integrated Internet Solution for Remote Noise Monitoring. Continuous monitoring of environmental data in remote areas has always presented a unique set of challenges. Typical solutions involve complex installations, frequent visits to remote locations to keep the system fully operational and require expert level attention to retrieve and share ...

SoundTrack - LxT N/Forcer - Sound Level Meters

by Larson Davis, a division of PCB Piezotronics

A Real Breakthrough in Noise Enforcement. For Community Noise Ordinance Measurements and Nuisance Complaint Response. Portable, compact and simple to use, the Larson Davis LxT N/Forcer Sound Level Meter produces accurate, citation-ready noise data on-the-spot, with its compact portable printer.

63x Series - Sound Level Meter

by Casella

The 63x Series sound level meters can be used for simultaneous measurement of all workplace noise parameters, as well as those required for environmental monitoring. With an intuitive design the meter is easy to use, with very little set up required.

24x Series - Sound Level Meter

by Casella

A simple survey instrument such as the 24x Series is ideal for general noise measurements like walk through surveys, spot checks on machinery or testing of fire alarms. Using the latest digital technology the instrument is able to give the highest levels of accuracy and performance.

62x Series - Sound Level Meter

by Casella

The 62x Series sound level meters can be used for simultaneous measurement of all workplace noise parameters.  The instrument uses an intuitive, colour coded display to ensure ease of use.

Enclosed Ground Flares Combustidizer

by AEREON

The Combustidizer Enclosed Ground Flare is a temperature controlled system, that allows for reduced flame visibility, minimal heat and noise, real-time emissions sampling, and smokeless combustion. Combustidizers may require supplemental assist gas streams depending on whether the process stream can sustain combustion or not. Moreover, these ...

Model 705 - Personal Noise Dosimeters

by Larson Davis, a division of PCB Piezotronics

Completely sealed in an extruded metal housing, with no controls or display to tamper with or damage, the basic model Spark 705 is programmed to start automatically and gather noise exposure data unobtrusively, time after time. Capable of storing up to fifty separate tests in a memory that can never be accidentally erased - even with the battery ...

Model BAS001 - Omnidirectional Sound Source

by Larson Davis, a division of PCB Piezotronics

The BAS001 Source is designed to generate omni-directional sound fields for making standard compliant measurements including: reverberation time (ISO 3382, ASTM E2235), building acoustics (insertion loss, acoustic absorption area, etc: ISO 140-4 ISO 140-3, ASTM E336, ASTM E90, DIN 55 210). The BAS001 is typically used to saturate a room with a ...

Need help finding the right suppliers?

Let the XPRTs do the work for you