respiratory protection Equipment in Mississippi

Serving Mississippi | Near Mississippi
13 Results found
  • Category: Health & Safety ×

  • Subcategory: Personal Protective Equipment ×

  • Keyword: respiratory protection ×

  • Location: USA ×

  • Location: Mississippi ×

MACK-NFPA - Multi-Air Command Kits

by Argus-Hazco     based in Chesterfield, MICHIGAN (USA)

Designed as a series of portable air distribution boxes to meet the most demanding air handling needs of the Fire/Rescue industry. Each unit has been tested to meet NFPA requirements. All models are manufactured to provide emergency low-pressure breathing air from either SCBA cylinders or from a bank of large storage cylinders located on fire ...

Full Face Masks

by SIBOL     based in SPAIN

With the Full Face Masks, SIBOL offers the posibility to get both an Eye and Respiratory  Protection. Suitable when Personal Eye Protection is required and at the same time, Respiratory Protection is necessary. Full Face Masks will be used with 

Model MRP352 - Single Use Foldable Dust Proof Mask

by Sibille Fameca Electric (SFE)     based in ZI Les plaines, FRANCE

Respiratory protection against the finest particles such as asbestos fibres, mineral wool, fibreglass dust, wood and hardwood dust, lead, metal welding fumes, etc. For intensive use, for long lasting activities. Anti-virus, anti-bacteria, pollution-proof and anti-allergen.

Model MRP252 - Single Use Foldable Dust Proof Mask

by Sibille Fameca Electric (SFE)     based in ZI Les plaines, FRANCE

Respiratory protection against fine particles such as dust from concrete, cement, plaster (demolition, structural works, sanding), fine paint and resin particles, plastics (sandblasting, sanding), etc. For intensive use, for long lasting activities. Anti-virus, anti-bacteria, pollution-proof and anti-allergen.

Model X3 - Air-Pak SCBA

by Scott Safety     based in Monroe, NORTH CAROLINA (USA)

The Scott Safety Air-Pak X3 SCBA was designed not only to exceed the new requirements outlined in the 2013 Edition of the 1981 and 1982 standards, but also to exceed customer expectations for what an Air-Pak SCBA should be. Scott Safety incorporated end-user feedback in every step of the design process to deliver to the fire service the next ...

North-Emergency Escape Breathing Apparatus

by CG Industrial Safety     based in Peekskill, NEW YORK (USA)

In an emergency situation, every second counts until workers can reach safety. The EEBA provides portable respiratory protection to workers while they are leaving work areas which have been contaminated. EEBAs are ideal for use in chemical and petrochemical industries, laboratories and paper mills. A clear, detachable polyurethane hood offers good ...

3M - Model 5000 Series - Half Facepiece Disposable Respirator

by J.J.Keller & Associates, Inc.     based in Neenah, WISCONSIN (USA)

Facepiece made from soft, lightweight thermoplastic elastomer. When properly fitted, helps provide respiratory protection from certain organic vapors and particulates at concentrations up to 10 times the Permissible Exposure Limit (PEL). Includes Organic Vapor cartridges and P95 prefilters. Fully assembled, Disposable, Made in the USA.

Personal Protection

by Safety DImensions (SDI)     based in Binghamton, NEW YORK (USA)

Physical safety protection against falls, extremes of heat, pressure, sound, and light, electrical current, cuts, abrasions, punctures, and impact. Chemical safety protective equipment against eye, face, hand, body, and foot contact with hazardous chemicals; respiratory protective equipment against the inhalation of hazardous chemical vapors. ...

TST Escape Hood Xtreme Escape Mask Protective Equipment PPE

by TST Sweden AB     based in Kinna, SWEDEN

This particular escape hood is manufactured to meet extra high demands. It fulfills British Standard, which requires very low leakage. Actual figure is 0,06%. where 2% is the limit! The design makes the hood comfortable to wear and easy to put on and off. No adjustments has to be done. The half-mask inside is made of silicone and the outside is ...

TST Escape Hood Escape Mask Protective Equipment PPE

by TST Sweden AB     based in Kinna, SWEDEN

The unique design makes the hood comfortable to wear and easy to put on. It is, without any adjustments, ready to put on and use. The half-mask inside is made of silicone. The neck cuff is designed for the closest possible fit and maximum elasticity. Twin exhaust valves ensure low respiratory resistance. The hood is available with three different ...

Need help finding the right suppliers?

Let the XPRTs do the work for you