respiratory protection Equipment in New Hampshire

Serving New Hampshire | Near New Hampshire
11 Results found
  • Category: Health & Safety ×

  • Subcategory: Personal Protective Equipment ×

  • Keyword: respiratory protection ×

  • Location: USA ×

  • Location: New Hampshire ×

Full Face Masks

by SIBOL     based in SPAIN

With the Full Face Masks, SIBOL offers the posibility to get both an Eye and Respiratory  Protection. Suitable when Personal Eye Protection is required and at the same time, Respiratory Protection is necessary. Full Face Masks will be used with 

Model X3 - Air-Pak SCBA

by Scott Safety     based in Monroe, NORTH CAROLINA (USA)

The Scott Safety Air-Pak X3 SCBA was designed not only to exceed the new requirements outlined in the 2013 Edition of the 1981 and 1982 standards, but also to exceed customer expectations for what an Air-Pak SCBA should be. Scott Safety incorporated end-user feedback in every step of the design process to deliver to the fire service the next ...

Scott - Model SCBA - High-Density Polyethylene Cases

by Argus-Hazco     based in Chesterfield, MICHIGAN (USA)

High-density polyethylene cases are ideal for carrying and storing Scott SCBAs. Cases have a two-piece hinge and replaceable latches. Outside dimensions: 19.5 inches x 29 inches x 13.75 inches. Color: Black.

MACK-NFPA - Air Systems Multi Air Command Kit

by Argus-Hazco     based in Chesterfield, MICHIGAN (USA)

The MACK-NFPA series has been developed specifically for the Fire/Rescue teams working under NFPA guidelines. The NFPA version of the MACK unit comes in two standard models. Each model has two separate regulator/manifold systems. Two SCBA connect whips are provided for each regulator. In the event of a regulator malfunction, rescue can be ...

TST Escape Hood Escape Mask Protective Equipment PPE

by TST Sweden AB     based in Kinna, SWEDEN

The unique design makes the hood comfortable to wear and easy to put on. It is, without any adjustments, ready to put on and use. The half-mask inside is made of silicone. The neck cuff is designed for the closest possible fit and maximum elasticity. Twin exhaust valves ensure low respiratory resistance. The hood is available with three different ...

TST Escape Hood Xtreme Escape Mask Protective Equipment PPE

by TST Sweden AB     based in Kinna, SWEDEN

This particular escape hood is manufactured to meet extra high demands. It fulfills British Standard, which requires very low leakage. Actual figure is 0,06%. where 2% is the limit! The design makes the hood comfortable to wear and easy to put on and off. No adjustments has to be done. The half-mask inside is made of silicone and the outside is ...

3M - Model 5000 Series - Half Facepiece Disposable Respirator

by J.J.Keller & Associates, Inc.     based in Neenah, WISCONSIN (USA)

Facepiece made from soft, lightweight thermoplastic elastomer. When properly fitted, helps provide respiratory protection from certain organic vapors and particulates at concentrations up to 10 times the Permissible Exposure Limit (PEL). Includes Organic Vapor cartridges and P95 prefilters. Fully assembled, Disposable, Made in the USA.

Personal Protection

by Safety DImensions (SDI)     based in Binghamton, NEW YORK (USA)

Physical safety protection against falls, extremes of heat, pressure, sound, and light, electrical current, cuts, abrasions, punctures, and impact. Chemical safety protective equipment against eye, face, hand, body, and foot contact with hazardous chemicals; respiratory protective equipment against the inhalation of hazardous chemical vapors. ...

Survivair - Model SSHOOD - Survivair Continuous Flow Supplied Air Respirator Replacement Hood, 3/box

by Safety DImensions (SDI)     based in Binghamton, NEW YORK (USA)

Survivair Continuous Flow Supplied Air Respirators with single bib Tyvek hood represent a highly cost-effective solution for respiratory protection in non-IDLH environments. Our Continuous Flow SARs are also compatible with a wide variety of common air sources and facepiece options. 3/box

3M - Model NSDSTMSK - See details 3M 9211 Flat Fold N95 Disposable Particulate Respirator

by Safety DImensions (SDI)     based in Binghamton, NEW YORK (USA)

• Get comfortable 3M respiratory protection in convenient packaging with these 9211 Flat Fold respirators • Packaged to prevent contamination before use • Fold these innovative, three-panel design 9211 N95 face masks flat for easy storage in pockets, tool bags, and lockers. • Innovative three-panel design conforms to a wide range of face shapes • ...

Need help finding the right suppliers?

Let the XPRTs do the work for you