Health & Safety Equipment in Czech Republic

15937 Results found
  • Category: Health & Safety ×

  • Location: Europe ×

  • Location: Czech Republic ×

Noise Tutor NMS Rapid Deployment Noise Monitoring System

by Larson Davis, a division of PCB Piezotronics

Integrated Internet Solution for Remote Noise Monitoring. Continuous monitoring of environmental data in remote areas has always presented a unique set of challenges. Typical solutions involve complex installations, frequent visits to remote locations to keep the system fully operational and require expert level attention to retrieve and share ...

SoundExpert - LxT - Noise Monitoring Kit

by Larson Davis, a division of PCB Piezotronics

In addition to the SoundExpert LxT meter, this kit includes the EPS042 protection case and D-cell battery pack, the EPS2108-2 microphone protection shroud, and EXC010 10 ft. cable. Using D-cell alkaline batteries, allows the noise monitor to be smaller and lighter; avoid the expense of shipping heavy lead acid batteries and the hassle of ...

SoundTrack - LxT N/Forcer - Sound Level Meters

by Larson Davis, a division of PCB Piezotronics

A Real Breakthrough in Noise Enforcement. For Community Noise Ordinance Measurements and Nuisance Complaint Response. Portable, compact and simple to use, the Larson Davis LxT N/Forcer Sound Level Meter produces accurate, citation-ready noise data on-the-spot, with its compact portable printer.

SoundTrack - LxT Model LXT1-QPR - Firearms Acoustic Analysis

by Larson Davis, a division of PCB Piezotronics

Quantitative Measurements of Sound Pressure Levels Generated by Firearms with & Without Suppression Devices. Many firearm examiners are tasked with determining whether installation of a suppressor on a firearm results in a “perceptible” reduction of the sound pressure level of a gun. The Larson Davis SoundTrack LxT provides this ...

Model BAS001 - Omnidirectional Sound Source

by Larson Davis, a division of PCB Piezotronics

The BAS001 Source is designed to generate omni-directional sound fields for making standard compliant measurements including: reverberation time (ISO 3382, ASTM E2235), building acoustics (insertion loss, acoustic absorption area, etc: ISO 140-4 ISO 140-3, ASTM E336, ASTM E90, DIN 55 210). The BAS001 is typically used to saturate a room with a ...

Model BAS003 - Directional Sound Source

by Larson Davis, a division of PCB Piezotronics

The BAS003 Source is designed to generate homogeneous sound fields using random noise in compliance with the following standards: Building acoustics (insertion loss, acoustic absorption area, etc: ISO 140-3, ASTM E90, ISO 140-5, ASTM E966). The BAS003 is typically used to generate a noise in a free-field for the evaluation of the transmission loss ...

Models REF500 & REF600 - Reference Sound Source

by Larson Davis, a division of PCB Piezotronics

The REF500 (120/240V, 50Hz) and REF600 (120/240V, 60Hz) Reference Sound Sources are an excellent tool for providing accurate and repeatable reference sound levels. These sources offer extremely flat response over a broad frequency range and are ideal for use in such applications as sound power, sound absorption, and sound insulation measurements. ...

Model BAS002 - Amplifier

by Larson Davis, a division of PCB Piezotronics

Measurement of reverberation time, sound isolation, and absorption coefficient are generally important measurements when verifying that a space or material complies with design goals. When making these measurements in the field or laboratory it is important to have equipment that is dependable, portable and easy to set up and use. When coupled ...

Model 831-INT - Docking Station

by Larson Davis, a division of PCB Piezotronics

The Model 831-INT provides the 426A12 outdoor microphone with both electrical power and control commands for its electrostatic actuator, temperature and humidity readout. The Vaisala WXT520 (SEN031) weather sensor is connected to the Model 831-INT for wind speed and direction, temperature and humidity, barometic pressure, rain and hail.

Acoustic Couplers & Ear Simulators

by Larson Davis, a division of PCB Piezotronics

Whether testing an earphone, hearing aid or audiometer, there is a Larson Davis coupler to satisfy your requirements. Due to the rugged, stainless steel construction and product quality you can rely on your Larson Davis coupler or ear simulator to work dependably for many years.

Need help finding the right suppliers?

Let the XPRTs do the work for you