Spill Control Equipment

2239 Results found
  • Category: Health & Safety ×

  • Subcategory: Spill Control ×

Spillway Gates

by Dyrhoff UK Ltd     based in Folkestone, UNITED KINGDOM

The Obermeyer spillway gate system is most simply described as a row of steel gate panels supported on their downstream side by inflatable air bladders. By controlling the pressure in the bladders, the pond elevation maintained by the gates can be infinitely adjusted within the system control range (full inflation to full deflation) and accurately ...

Sorbent Mat Wringer

by EnviroGuard Ltd.     based in Calgary, ALBERTA (CANADA)

15'Wx12'H Qty: 1 16 lbs. Wringer Reclaims Up to 90% of Fluid: Use this Wringer to squeeze and recover up to 90% of absorbed fluids from most sorbent mats. All-steel, rustproof frame is virtually indestructible. Adjustable screws balance pressure over the length of the roller.

Model W 10 lb bag - Absorbent

by Bowhead Environmental & Safety, LLC_b     based in Preston, WASHINGTON (USA)

Made from 100% recycled cellulose pulp treated to only absorb hydrocarbons, Absorbs only oil – not water!, Instantly absorbs and retains hydrocarbons while repelling water, even when fully saturated, Hydrocarbons are absorbed into the fibers and will not leach or drain, Ideal for marinas, docks and other areas where you need to remove ...

Spill Berm

by Erosion Control Forum     based in Bend, OREGON (USA)

Stop EVERYTHING from going into a stormwater drain.

Automatic Doorway Spill and Flood Barrier

by Quatrex Environnement Inc.     based in Laval, QUEBEC (CANADA)

Automatic Doorway Spill Barrier contains large spills and sprinkler releases to a room by automatically closing upon the introduction of liquid into the built-in collection sump. Remains open until spill, allowing normal pedestrian and vehicular traffic. Fully automatic -no external power source required. Stainless Steel construction is durable ...

CHEMTEX - Waterwick – Pull Water From Fuel Tanks

by Chemtex, Inc.     based in Cumberland, RHODE ISLAND (USA)

Maintain peak performance and prevent engine failure. A Waterwick sorbent pulls in water that collects in fuel tanks before it can cause damage. Helps preserve engine life and prevent frozen lines by removing water from fuel stores; also minimizes filter-clogging rust and algae. Ballast forces Waterwick to bottom of tank, where unwanted water ...

Urethane Drain Protector

by West Coast Spill Supplies Ltd.     based in Saanichton, BRITISH COLUMBIA (CANADA)

Urethane Drain Protectors are positive sealing drain covers that ensure spills do not enter drains. Drain Protectors are environmentally safe and resistant to chemicals, solvents and hydrocarbons. A tacky surface creates a positive seal that stops chemical spills every time. After use, the Drain Protector can be washed and stored in its tube ...

MiniBagger - Oil Spill Recovery System

by Meritaito Ltd / SeaHow     based in Helsinki, FINLAND

MiniBagger is a flexible and cost efficient way of improving oil spill recovery in harbours, rivers, canals and other shallow or narrow water areas. With MiniBagger you can collect even diesel from the water with any vessel. SeaHow offers two detachable side collectors. MiniBagger is the smaller of them and can be installed to boats as small as 5 ...



Socks are an essential product used for any oil spill cleanup. These products are filled with polypropylene material that makes them ideal for containing a spill on the spot.



Universal Mini-Pillows are designed to absorb any non-aggresive spill including acids and alkali’s. If you need something less than a full pillow then the mini-pillow may be your solution.

Need help finding the right suppliers?

Let the XPRTs do the work for you