Vapor Intrusion Equipment in Vatican City

Served | Office inNear
11 Results found
  • Category: Health & Safety ×

  • Subcategory: Vapor Intrusion ×

  • Location: Europe ×

  • Location: Vatican City ×

LIQUID BOOT - Gas Vapor Barrier

by CETCO     based in Hoffman Estates, ILLINOIS (USA)

Liquid Boot is a cold, spray-applied, water-based membrane that contains no VOCs and provides a seamless barrier against vapor intrusion into structures. Liquid Boot is installed under slab and on below grade vertical walls as a gas vapor barrier to minimize vapor and nuisance water (non-hydrostatic conditions) migration into buildings. Benefits ...

Retro-Coat - Vapor Intrusion Technology

by REGENESIS     based in San Clemente, CALIFORNIA (USA)

Secondly, Retro-Coat is a recently introduced vapor intrusion technology from REGENESIS’ Land Science Technologies Division, whose widely used Geo-Seal composite vapor barrier system received the Environmental Business Journal (EBJ) Remediation Technology Award in 2008. Retro-Coat is a new chemical-resistant coating specifically engineered ...

Sulfur Analysis

by Entech Instruments, Inc.     based in Simi Valley, CALIFORNIA (USA)

Sulfur compounds can be collected in Silonite™ coated stainless steel canisters and stored up to several weeks without significant loss while awaiting analysis. Evacuated canisters are easy to use, eliminating the need for power during the sampling process. Sample collection can be performed quickly (grab sample) or over a several hour period to ...

Soil Gas

by Entech Instruments, Inc.     based in Simi Valley, CALIFORNIA (USA)

Soil gas samples can be collected in 0.4L and 1L MiniCans to determine concentrations of organic compounds and solvents which could ultimately end up in water supplies without redemption. MiniCans are compatible with all soil probes from Entech. Solvent Enhancement Enclosure (SEE) can also be used to concentrate surface gases before sampling.

Cupolex - Gas Protection

by Cupolex Building Systems - Pontarolo Engineering Inc.     based in Concord, ONTARIO (CANADA)

More and more housing and commercial developments are being built on sites where toxic and hazardous gases such as methane, radon, carbon dioxide, carbon monoxide and other VOCs are present or may be present in the future. The CUPOLEX Pre-Emptive Mitigation System has been developed to facilitate the dilution and dispersal of these harmful vapors ...

Landfill Gas

by Entech Instruments, Inc.     based in Simi Valley, CALIFORNIA (USA)

Landfill gas can be collected and analyzed using 0.4L MiniCan samplers. 'No pump' sampling is performed using the self-contained vacuum in the MiniCan, which considerably simplifies the sampling process relative to Tedlar bags. Sample holding times are up to several weeks due to the dense, inert Silonite™ coating used to line the inside of ...

Process Monitoring - Volatile Sulfur in Process Gas

by Entech Instruments, Inc.     based in Simi Valley, CALIFORNIA (USA)

Sulfur gases are a byproduct of petroleum refining and must be monitored in many product, waste, and exhaust streams. Stack emission of sulfur compounds can lower pH of surrounding streams and lakes through the generation of acid rain. Transmission of sulfur compounds in feed streams to petrochemical refining operations can result in shortened ...

Soil Vapour Surveys/Methane Gas

by TerraDat     based in Cardiff, UNITED KINGDOM

Soil Vapour Surveys are an integral tool for the location of contamination “hotspots”. They are used as an aid in determining the nature and extent of contamination at a site. The soil vapour survey confirms the presence of vapours in the subsurface environment and can serve as a guide in decided upon locations for intrusive ...

PAMS & Air Toxics (TO Methods) Sampling

by Entech Instruments, Inc.     based in Simi Valley, CALIFORNIA (USA)

Entech's Silonite™ technology is at the heart of our 1800 dual channel sampler. Unpassivated stainless steel sampling systems can result in compound losses in excess of 80% in down the pipe studies. Only Entech's Silonite™ coated stainless steel flow path makes a sampler as inert as Entech's Silonite™ coated stainless steel canisters.

AMS - Sub-Slab Gas Vapor Probe Kits

by Art’s Manufacturing and Supply, Inc. (AMS Inc.)     based in American Falls, IDAHO (USA)

Sample for volatile organic and inorganic compounds from beneath floor slabs. Sub-slab sampling and routine monitoring has become an integral part of vapor intrusion investigations. The AMS Sub-Slab Gas Vapor Probe Kit provides a semi-permanent probe, designed to allow repeated sampling over time in order to assess the potential of contaminated ...

Need help finding the right suppliers?

Let the XPRTs do the work for you