accelerometer Equipment in Aruba

Serving Aruba | Near Aruba
104 Results found
  • Category: Health & Safety ×

  • Subcategory: Vibration Control ×

  • Keyword: accelerometer ×

  • Location: Latin America ×

  • Location: Aruba ×

Brüel & Kjær - Model Type 4527 - Triax Accelerometer

by Brüel & Kjær Sound & Vibration Measurement A/S     based in Nærum, DENMARK

Designed to operate continuously at 180°C (356°F) to meet the toughest environmental requirements, the wide 0.3Hz to 10 kHz frequency range and low weight of Triaxial CCLD Accelerometer Types 4527 and 4527-001 make them equally suitable for use as general purpose accelerometers. When only a single- or dual-axis measurement is needed, these ...

Model SV 150 - Tri-Axial Acceleromete

by Svantek Ltd.     based in Warszawa, POLAND

SV 150 is a tri-axial accelerometer designed to be used with the SV 106 human vibration analyser to provide a dedicated instrument for measurements according to ISO 5349-2. The accelerometer can easily be attached to the handle of the vibrating tool being measured. The sensor's TEDS memory stores information about calibration factor limiting ...

VibroSystM - Model VSM797S - Low Frequency Piezoelectric Accelerometer

by VibroSystM Inc.     based in Longueuil, QUEBEC (CANADA)

The VSM797S is a hermetically sealed piezoelectric accelerometer designed to measure absolute vibration in harsh industrial environments. It incorporates a low-pass filter within the conditioning circuit to attenuate the sensor's mechanical resonance as well as the associated distortion and overload. The sensor features a low noise and temperature ...

Accelerometers

by Brüel & Kjær Vibro GmbH     based in Darmstadt, GERMANY

For advice on the correct acceleration sensor and installation accessories, we recommend that you discuss your specific application with our specialists to ensure the correct solution.

SENSR - Model CX1 - Accelerometers

by Cautus Geo AS     based in Lier, NORWAY

A new geotechnical sensor with the latest MEMS technology from manufacturer SENSR for dynamic and continuous monitoring of vulnerable structures and unstable land. It can be used to geomonitorering of landslides, bridges, buildings, tanks and other structures. CX1 is a robust, easy to use and highly accurate sensor to detect tilt in two axes, ...

Model V9A & V13AP - Accelerometer

by Vemco     based in Bedford, NOVA SCOTIA (CANADA)

The V9A Accelerometer Transmitter and V13AP Accelerometer Pressure Transmitter are the newest addition to the VEMCO family of coded sensor transmitters. The V9A and V13AP transmit 3D acceleration of your fish as they move within your VEMCO receiver array with the V9AP also transmitting depth data. The ...

Hansford - Model HS-170ST Series - Vibration Sensor

by Hansford Sensors     based in High Wycombe, UNITED KINGDOM

Premium 3 Pin MS Connector, Low Profile, 100mV/g Industrial Accelerometer with Temperature Sensor. Fast settling times 2 secs. 100mV/g. Sealed to IP68. For use with portable data collectors.

Hansford - Model HS-170 Series - Premium Top Entry Accelerometers

by Hansford Sensors     based in High Wycombe, UNITED KINGDOM

2 Pin MS, Slim Profile, 100mV/g Industrial Accelerometer. Fast settling times 2 secs. 100mV/g. Sealed to IP68. For use with portable data collectors.

Hansford - Model HS-160 Series - Velocity Industrial Accelerometer Top Entry

by Hansford Sensors     based in High Wycombe, UNITED KINGDOM

Velocity 2 Pin MS Connector Industrial Accelerometer - Top Entry. 4mV/mm/s output. Various mountings. Sealed to IP67.

Hansford - Model HS-420 Series - 4-20mA - Transmitters and Loop Powered Sensors (LPS) Velocity

by Hansford Sensors     based in High Wycombe, UNITED KINGDOM

2 Pin MS Connector PLC Acceleromete. 4-20mA output proportional to velocity. Various mountings. Sealed to IP67.

Need help finding the right suppliers?

Let the XPRTs do the work for you