noise and vibration Equipment in Australia

Serving Australia | Office in AustraliaNear Australia
68 Results found
  • Category: Health & Safety ×

  • Subcategory: Vibration Control ×

  • Keyword: noise and vibration ×

  • Location: Australasia ×

  • Location: Australia ×

01DB - Model dB4 - 4-Channel Portable Noise and Vibration Analyser

by ACOEM     based in Limonest, FRANCE

dB4 is a portable noise and vibration analyser consisting of a USB2.0 4-channel acquisition unit combined with one of the software program of the 01dB range (dBFA or dBENV). Connected to the computer through the USB port, the dB4 system offers 4 synchronised 24-bit ICP inputs for performing operating, both in portable and fixed mode.

Brüel & Kjær - Model LDS COMET USB - Vibration Control System

by Brüel & Kjær Sound & Vibration Measurement A/S     based in Nærum, DENMARK

Affordable performance for random, shock and sine testing with electrodynamic and hydraulic shakers. Ideal for vibration stress screening and production test applications.

Brüel & Kjær - Model LDS LASER USB - Vibration Control System

by Brüel & Kjær Sound & Vibration Measurement A/S     based in Nærum, DENMARK

Combining convenience, performance, flexiblity and safety, LASERUSB is the ideal controller for your test lab. It has 24-bit precision with wide control dynamic range, and fast loop times to provide superb control for your most challenging tests. LASERUSB provides full capability controller for random, swept-sine, resonance dwell, classical shock, ...

Brüel & Kjær - Model LDS PA Series - Linear Power Amplifiersr for Vibration Test Systems 25 W to 1000 W

by Brüel & Kjær Sound & Vibration Measurement A/S     based in Nærum, DENMARK

The PA series of linear power amplifiers ranges in power output from 25 W to 1000 W and are designed to support LDS vibration test system's power both permanent magnet shakers and small electrodynamic shakers. These amplifiers are also used extensively to power 3rd party shakers.

Brüel & Kjær - Model LDS V555 - Low Force Shaker for Vibration Environment under Laboratory Conditions

by Brüel & Kjær Sound & Vibration Measurement A/S     based in Nærum, DENMARK

The  V555 is designed to create a vibration environment. Qualification tests on components and small assemblies can be reproduced under controlled conditions using a wide frequency band. The V555 shaker will operate in the frequency range of DC to 6300Hz from either a sine or random input waveform.

SVANTEK - Model SV 212 - Environmental Noise & Vibration Monitoring Station

by SVANTEK Ltd.     based in Warszawa, POLAND

The SV 212 is a weather protected, portable environmental vibration & sound monitoring station dedicated for periodical measurements. SV 212 is dedicated to be used with SVAN 958 instrument. This four channel sound & vibration analyser is offered now with the special KB filter for building vibration measurements meeting DIN 4150 standard ...

Noisepro - Model DLX - Noise Dosimeter

by Air-Met Scientific Pty Ltd     based in Nunawading, AUSTRALIA

The new NoisePro Series dosimeters and latest QuestSuite® Professional Applications Software provide “The System Solution” for professionals responsible for occupational hearing conservation. More than just a recorder of history, “The System Solution” from Quest serves hearing conservationists needs on three unique ...

Svantek - Model SV-104-Noise-Dosimeter - Personal Noise Dosimeter

by Sensidyne     based in St. Petersburg, FLORIDA (USA)

Until the introduction of the SV 104 Personal Noise Dosimeter, noise dosimeters only did half the job of protecting workers from noise dose exposures. Traditional noise dosimeters only determined the dose exposure level and could not provide hearing protection data found in octave band analysis. The SV 104 Personal Noise Dosimeter is the only ...

Vidisy - Model VECTOR - Vibration Diagnostic System

by Vidisy     based in Lviv, UKRAINE

VECTOR system enables the use of electronic one- and three-dimensional (vector) vibration acceleration sensors ДВ1-70 and ДВ3-70. The system is intended for diagnostics of industrial equipment, shaft balancing, finding the location of defects, as well as measuring noise density in production premises.

01dB - Model FUSION - Smart Sound & Vibration Analyzer

by ACOEM     based in Limonest, FRANCE

FUSION, the new sound level meter and analyzer from 01dB, is simply unique. With its compact, robust and practical design, FUSION is ideal for use in the field. FUSION offers an innovative solution for noise and vibration measurement, with high-performance features designed to facilitate analysis. It offers excellent connectivity, enabling you to ...

Need help finding the right suppliers?

Let the XPRTs do the work for you