noise and vibration Equipment in Paraguay

Serving Paraguay | Near Paraguay
64 Results found
  • Category: Health & Safety ×

  • Subcategory: Vibration Control ×

  • Keyword: noise and vibration ×

  • Location: Latin America ×

  • Location: Paraguay ×

01DB - Model dB4 - 4-Channel Portable Noise and Vibration Analyser

by ACOEM     based in Limonest, FRANCE

dB4 is a portable noise and vibration analyser consisting of a USB2.0 4-channel acquisition unit combined with one of the software program of the 01dB range (dBFA or dBENV). Connected to the computer through the USB port, the dB4 system offers 4 synchronised 24-bit ICP inputs for performing operating, both in portable and fixed mode.

Brüel & Kjær - Model LDS PA Series - Linear Power Amplifiersr for Vibration Test Systems 25 W to 1000 W

by Brüel & Kjær Sound & Vibration Measurement A/S     based in Nærum, DENMARK

The PA series of linear power amplifiers ranges in power output from 25 W to 1000 W and are designed to support LDS vibration test system's power both permanent magnet shakers and small electrodynamic shakers. These amplifiers are also used extensively to power 3rd party shakers.

Svantek - Model SV-104-Noise-Dosimeter - Personal Noise Dosimeter

by Sensidyne     based in St. Petersburg, FLORIDA (USA)

Until the introduction of the SV 104 Personal Noise Dosimeter, noise dosimeters only did half the job of protecting workers from noise dose exposures. Traditional noise dosimeters only determined the dose exposure level and could not provide hearing protection data found in octave band analysis. The SV 104 Personal Noise Dosimeter is the only ...

Norsonic - Model Nor150 - Sound and Vibration Analyser

by Norsonic AS     based in Lierskogen, NORWAY

The sound and vibration analyser Nor150 sets new standards in user-friendliness. Featuring the largest colour touchscreen in a handheld meter on the market today, the Nor150 provides the user friendliness of a smartphone. Further features include, built in web server, camera, GPS and advanced voice and text notes bringing the sophistications ...

SV - Model 102 - Single or Dual Channel Noise Dosimter

by Sensidyne     based in St. Petersburg, FLORIDA (USA)

Noise Dosimeter for Workplace Safety, Occupational Health and Industry. SV 102 dual-channel instrument presents completely new approach to occupational health and safety acoustic monitoring task. The binaural dose measurement and 1/1 octave analysis are simultaneously performed. Octave analysis providing direct data for ear-protectors designing ...

Model SES 6000 - Shock Mount

by WillBrandt Gummitechnik     based in Hamburg, GERMANY

WILLBRANDT shock absorbers are used for protection from severe shock and provide high isolation against structure borne noise. Type SES 6000 was designed for very heavy loads, up to 25,000 kg.

Soilspy Rosina - Multichannel Digital System

by Micromed Geophysics     based in Mogliano Veneto (TV), ITALY

Soilspy Rosina is the new hardware and software concept of multichannel digital system for all active and passive seismic surveys. Soilspy Rosina consists of a digital data transmission cable along which the amplification/digitization modules are set, each one to be connected to a sensor (commonly geophones). This allows a higher signal quality ...

Model RHV 1500 - Rotary Vibratory Head

by EURODRILL GmbH     based in Drolshagen, GERMANY

Design Features RHV 1500: Modular and compact design requires only small room. Strong bearing system of the main shaft which is designed as a hollow shaft for most diverse drilling applications and drilling methods. Permanent lubrication and cooling via an integrated hydraulically system. Compatible to drill rigs of all manufacturers for different ...

SVAN - Model 955 - Low Cost Type 1 Sound Level Meter

by Sensidyne     based in St. Petersburg, FLORIDA (USA)

SVAN 955 is all digital, Type 1 sound level meter. Instrument is intended to general acoustic measurements, environmental noise monitoring, occupational health and safety monitoring.

Cubic - Engine RPM sensor Based on Vibration and Noise

by Wuhan Cubic optoelectronics Co Ltd     based in Wuhan, CHINA

Introduction: Use for dynamic and static engine RPM measurement. Use for petrol and diesel engine. Self-calibrating and automatic function monitoring. Universal, connective to any exhaust gas analyzerSpecification:Measure Target: 4 stroke petrol and diesel engines.Signal input: Vibration and noise sensor.Signal output: RS232 and TTL,LCD. Power ...

Need help finding the right suppliers?

Let the XPRTs do the work for you