noise and vibration Equipment in Uganda

Serving Uganda | Near Uganda
71 Results found
  • Category: Health & Safety ×

  • Subcategory: Vibration Control ×

  • Keyword: noise and vibration ×

  • Location: Africa ×

  • Location: Uganda ×

01DB - Model dB4 - 4-Channel Portable Noise and Vibration Analyser

by ACOEM     based in Limonest, FRANCE

dB4 is a portable noise and vibration analyser consisting of a USB2.0 4-channel acquisition unit combined with one of the software program of the 01dB range (dBFA or dBENV). Connected to the computer through the USB port, the dB4 system offers 4 synchronised 24-bit ICP inputs for performing operating, both in portable and fixed mode.

Brüel & Kjær - Model LDS PA Series - Linear Power Amplifiersr for Vibration Test Systems 25 W to 1000 W

by Brüel & Kjær Sound & Vibration Measurement A/S     based in Nærum, DENMARK

The PA series of linear power amplifiers ranges in power output from 25 W to 1000 W and are designed to support LDS vibration test system's power both permanent magnet shakers and small electrodynamic shakers. These amplifiers are also used extensively to power 3rd party shakers.

Brüel & Kjær - Model LDS V555 - Low Force Shaker for Vibration Environment under Laboratory Conditions

by Brüel & Kjær Sound & Vibration Measurement A/S     based in Nærum, DENMARK

The  V555 is designed to create a vibration environment. Qualification tests on components and small assemblies can be reproduced under controlled conditions using a wide frequency band. The V555 shaker will operate in the frequency range of DC to 6300Hz from either a sine or random input waveform.

01dB - Model FUSION - Smart Sound & Vibration Analyzer

by ACOEM     based in Limonest, FRANCE

FUSION, the new sound level meter and analyzer from 01dB, is simply unique. With its compact, robust and practical design, FUSION is ideal for use in the field. FUSION offers an innovative solution for noise and vibration measurement, with high-performance features designed to facilitate analysis. It offers excellent connectivity, enabling you to ...

SV - Model 102 - Single or Dual Channel Noise Dosimter

by Sensidyne     based in St. Petersburg, FLORIDA (USA)

Noise Dosimeter for Workplace Safety, Occupational Health and Industry. SV 102 dual-channel instrument presents completely new approach to occupational health and safety acoustic monitoring task. The binaural dose measurement and 1/1 octave analysis are simultaneously performed. Octave analysis providing direct data for ear-protectors designing ...

Model SES 6000 - Shock Mount

by WillBrandt Gummitechnik     based in Hamburg, GERMANY

WILLBRANDT shock absorbers are used for protection from severe shock and provide high isolation against structure borne noise. Type SES 6000 was designed for very heavy loads, up to 25,000 kg.

Soilspy Rosina - Multichannel Digital System

by Micromed Geophysics     based in Mogliano Veneto (TV), ITALY

Soilspy Rosina is the new hardware and software concept of multichannel digital system for all active and passive seismic surveys. Soilspy Rosina consists of a digital data transmission cable along which the amplification/digitization modules are set, each one to be connected to a sensor (commonly geophones). This allows a higher signal quality ...

Cubic - Engine RPM sensor Based on Vibration and Noise

by Wuhan Cubic optoelectronics Co Ltd     based in Wuhan, CHINA

Introduction: Use for dynamic and static engine RPM measurement. Use for petrol and diesel engine. Self-calibrating and automatic function monitoring. Universal, connective to any exhaust gas analyzerSpecification:Measure Target: 4 stroke petrol and diesel engines.Signal input: Vibration and noise sensor.Signal output: RS232 and TTL,LCD. Power ...

SVAN - Model 955 - Low Cost Type 1 Sound Level Meter

by Sensidyne     based in St. Petersburg, FLORIDA (USA)

SVAN 955 is all digital, Type 1 sound level meter. Instrument is intended to general acoustic measurements, environmental noise monitoring, occupational health and safety monitoring.

SV - Model 25S - MIRE (Microphone in Real Ear)

by Sensidyne     based in St. Petersburg, FLORIDA (USA)

Assess Noise Sources Near to a Human Ear. Microphone In Real Ear (MIRE) is a technique for assessing the noise sources placed in a short distance to a human ear, requiring dedicated measuring instrumentation. SV 25S microphone has been designed together with SV 102 dual-channel acoustic dosimeter to meet requirements of ISO 11904 and ANSI ...

Need help finding the right suppliers?

Let the XPRTs do the work for you