Air Monitoring Equipment

3897 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Air Monitoring ×


NEW: VOC72M - The most compact and fully automated BTEX (Volatile Organic Compounds) analyser on the market,TÜV Certified

by Environnement S.A

The VOC72M, a key product of Environnement S.A (France) for the measurement of benzene, has obtained end of December the TÜV certification for ambient air monitoring. The analyser has passed successfully the laboratory and 3 months field investigations and found to comply with VDI 4202-1 : 2010, VDI 4203-3 : 2010, EN 14662-3 : 2005, EN 15267-1 : ...


Gradko - Acid Gas Diffusion Tubes

by Gradko International Ltd

This tube can simultaneously measure a range of acid gases – Hydrogen fluoride, Hydrogen chloride, Nitric acid, Hydrogen bromide, Phosphoric acid and Sulphuric acid (HF, HCl, HNO3, HBr, HPO4 and H2SO4).


HORIBA - SMA-371 - Datalogger

by HORIBA Europe GmbH

The HORIBA SMA-371 data logger can be used both, in the online and in the offline operating mode. In the online operating mode you attach the data logger directly to the serial interface of the PC. In this case only instantaneous values are processed. On the basis of the instantaneous values the further processing takes place in EDA-2000. If only ...


DynOptic - DSL-220 MkIII - Single Pass Opacity Monitor for Monitoring Opacity and Smoke Emissions

by DynOptic Systems Ltd

The DSL-220 Opacity Monitor is an optical instrument designed to measure the visible opacity of exhaust gas in a duct, stack or flue.The DSL-220 uses the single pass light transmission measurement technique, with Transmitter/Receiver arrangement. A light beam emitted from the Transmitter passes across the stack to a Receiver, which measures the ...


CMP-Series - Cabinet Mounted Continuous Duty Air Samplers

by HI-Q Environmental Products Company

HI-Q's CMP-Series air sampling systems allow for continuous duty/constant flow rate air samples at operator pre-set flow rates. These continuous duty, constant flow, self contained air sampling systems are commonly used as the primary air mover for gas/particulate collection and/or real time air monitoring. Two face mounted vacuum gauges allow the ...


Environics - Gas Chromatography Calibration System

by Environics, Inc.

Environics Gas Mixers, Dilutors and Dividers have been the used in laboratories for over twenty years for applications including gas chromatography-mass spectrometry (GC-MS), GC with Flame Ionization Detector (GC-FID), and GC with thermal conductivity detector (GC-TCD). Our systems can produce gas concentrations from percent to ppb levels at the ...


Land - 4500 MkIII - Opacity and Dust Emissions Compliance Monitor

by Land Instruments International

The Land Model 4500 MkIII has reset the industry standard on compliance opacity and dust concentration measurement. Combining the unique features of three patented technologies, the 4500 MkIII achieves the highest available specification for the principal performance parameters, as defined by the internationally recognized ASTM Standard D 6216-07.


Environmental Sensors - Z-500 - Hand Held Carbon Monoxide Monitor Meter

by Environmental Sensors Company

Environmental Sensors Co.'s Carbon Monoxide Meter is a hand held instrument that measures carbon monoxide concentration in a range of 0-300 ppm and a resolution of 1 or 0.1 ppm. The instrument makes it possible to monitor carbon monoxide vapor in air. The insturment has an LCD display giving concentrations in ppm, a low battery indicator, and an ...


HFC-Series - Digital & Analog Style High Volume Calibrators

by HI-Q Environmental Products Company

The HFC-Series, HI-Volume Air Flow Calibrators, have eliminated the need for cumbersome orifice plates and water manometers. The HFC-XXC series units utilize a precision machined Venturi tube coupled with a pressure differential gauge giving a direct reading in the volumetric units of your choice (i.e. SCFM @ stp) . The unit is calibrated against ...


WDG 1200 & 1210 Insitu - Flue Gas Oxygen Analyzer With Automatic Calibration and Modbus Output

by Ametek Process Instruments - THERMOX

The WDG 1200 Insitu and the WDG 1210 Insitu are rugged, reliable flue gas analyzers for net oxygen that use industry-proven zirconium oxide sensor technology. The outer probe tube is 310 stainless steel so no abrasion shield is needed for most applications. The controller features precision temperature control for optimum stability, built-in ...

Need help finding the right suppliers?

Let the XPRTs do the work for you