mass flow calibrators Equipment

43 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Air Monitoring ×

  • Keyword: ×

Model Sx 6000 C1 - Multipoint Multigas Calibrator

by LNI Schmidlin SA     based in Chatelaine-Geneva, SWITZERLAND

The SONIMIX 6000C1 is equipped with an interface designed to be directly compatible with the Data Acquisition stations with the ISO7168 protocol, or with the analysers. That feature allows in Remote mode, to receive and to interpret for each gas, the instructions MEASURE, ZERO and CALIBRATION. In Local mode, the interface allows to Configure the ...

MCZ - Model MK5 / MK10 - Calibration System

by Umwelttechnik MCZ GmbH     based in Bad Nauheim, GERMANY

The calibration system MK5/MK10 is equipped with standard modules for the different methods of generating span gas based on the specific application. The generated span gas is provided depressurized for output. The MK5 series can be equipped with max. 5, the MK10 series with max. 10 modules. Used to calibrate gas analyzers in labs, service ...

Environnement S.A. - Model MGC 101 - Multi-gas Calibrator for Ambient Air Gas Analyzers

by Environnement S.A     based in Poissy, FRANCE

Multi-gas calibrator for ambient air gas analyzers; Automatic calculation of dilution and span gas flows, based on commanded concentration, eliminates the need for any manual computation and allows rapid transition from point to point. Internally-stored mass flow controller calibration data improves accuracy (factor of ten) and simplifies field ...

Xact - Model 625 - Metals Monitoring System - CES Ambient/Fence-Line Monitor (FLM)

by Enviro Technology Services plc     based in Stroud, UNITED KINGDOM

The CES Xact 625 system is designed for monitoring ambient air near the fence lines of industrial facilities and in complex urban environments, where particulate matter and metal concentrations are elevated. The system uses reel-to-reel (RTR) filter tape sampling and nondestructive X-ray fluorescence (XRF) analysis to monitor ambient air. The air ...

ATEC - Model 2200 - Toxic Air Sampler

by ATEC     based in Malibu, CALIFORNIA (USA)

The ATEC Models 2200 and 2200-2 Toxic Air Samplers are self-contained air sampling instruments that have been specifically designed to simultaneously collect air samples into canisters and sorbent cartridges for specified time periods. This provides the capability of obtaining both VOC and Carbonyl measurements at the same time with one ...

Thermo Scientific - Model 1405-F TEOM™ - Continuous Ambient Air Monitor

by Thermo Scientific - LC/MS GC GC/MS     based in MASSACHUSETTS (USA)

Take continuous direct measurements of PM-10, PM-2.5, and PM-1 particulates using the Thermo Scientific™ 1405-F TEOM™ Continuous Ambient Air Monitor. This monitor utilizes a tapered element oscillating microbalance (TEOM) and Filter Dynamics Measurement System (FDMS) to provide measurements with excellent short-term precision and ...

Model DFM - Digital GAS Mass Flow Meter

by Aalborg Instruments & Controls, Inc.     based in Orangeburg, NEW YORK (USA)

DFM programmable thermal mass flow meter with digital signal processing

Partisol-Plus - Model 2025 - Sequential Air Sampler

by Orion s.r.l.     based in Veggiano, ITALY

The Partisol-Plus Air Sampling System defines the state of the art in flexible, fieldproven sequential air sampling. The device exchanges 47 mm diameter sample filters automatically by a user-defined time interval or other condition. It has a capacity of 16 filter cassettes, allowing for two weeks of unattended daily sampling of particulate matter ...

HORIBA - Model APMA-370 - Ambient Carbon Monoxide Monitor

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

The APMA-370 is a device for continuously monitoring CO concentrations using a Non-dispersion cross modulation infrared analysis method. The APMA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy. The dry method, due to its capability for continuously monitoring and ...

F&J - Model Displayless Version - World Calibrator

by F&J SPECIALTY PRODUCTS, INC.     based in Ocala, FLORIDA (USA)

F&J SPECIALTY PRODUCTS, INC (F&J) has introduced a feature rich air flow service calibration system that are both PC interfaceable. One system is offered with a vacuum flourescent display and four button keypad and can be used as a standalone unit. The displayless version is designed to be connected to a PC. The F&J World Calibrator ...

Need help finding the right suppliers?

Let the XPRTs do the work for you