Air Monitoring Equipment in Singapore

2214 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Air Monitoring ×

  • Location: Asia & Middle East ×

  • Location: Singapore ×


HORIBA - SMA-371 - Datalogger

by HORIBA Europe GmbH

The HORIBA SMA-371 data logger can be used both, in the online and in the offline operating mode. In the online operating mode you attach the data logger directly to the serial interface of the PC. In this case only instantaneous values are processed. On the basis of the instantaneous values the further processing takes place in EDA-2000. If only ...

HORIBA - PTFM-1000 - Pitot Tube Flow Meter

by HORIBA Europe GmbH

The PTFM-1000 is used for the direct measurement of engine exhaust gas flow rate on engine and chassis dynamometer test systems. The PTFM provides the exhaust flow rate without requiring a CVS for CO2 tracer or modification to the engine for air and fuel flow measurement. Meets the accuracy requirements of ISO 16183. (+/- 1.5% of max fl ow or +/- ...

HORIBA - PG-350E - Portable Gas Analyzer

by HORIBA Europe GmbH

HORIBA is glad to present our new portable gas analyzer PG-350 E. So far results have been excellent and HORIBA applied for approval according to DIN EN 15267 - 3, DIN EN 14181 (NOX, SO2, CO, CO2, O2) and approval as Standard Reference Method (SRM) for: NOX (DIN EN 14792), CO (DIN EN 15058), O2 (DIN EN 14789).

Capital Controls CAPTROL Series 1450 Controller

by Severn Trent Services, Inc

The Capital Controls® CAPTROLcontroller is a microprocessor-based controller designed to control chemical feed with a Capital Controls automatic gas feeder valve in water or wastewater applications. Standard features include: three chlorination and two dechlorination control modes; built-in multiplier for feed forward dechlorination control; ...

Capital Controls CAPTROL Series 1451 Controller

by Severn Trent Services, Inc

The Capital Controls® CAPTROLcontroller is a microprocessor-based controller designed to control chemical feed with a Capital Controls automatic gas feeder valve in water or wastewater applications. Standard features include: three chlorination and two dechlorination control modes; built-in multiplier for feed forward dechlorination control; ...

Capital Controls ADVANCE - Series 1620B - Multipoint Gas Detector

by Severn Trent Services, Inc

Capital Controls ADVANCE Multipoint Gas Detector Series 1620B provides continuous detection of chlorine or sulfur dioxide gas in a normally clean air environment in up to eight (8) distinct locations. The modular gas detection system consists of a single indicator/receiver and a sensing module for each location (up to eight locations) for ...

Capital Controls ADVANCE - Series 1610B - Single Point Gas Detector

by Severn Trent Services, Inc

Capital Controls ADVANCE™ Single Point Gas Detector, Series 1610B provides continuous detection of chlorine or sulfur dioxide gas in a normally clean air environment. ADVANCE™ gas detectors are ideal for protection of personnel and property wherever chlorine or sulfur dioxide is unloaded, stored or used. Highly sensitive, the detector ...

Capital Controls - Series 17CA3000 Chloralert Plus - Hazardous Gas Monitor

by Severn Trent Services, Inc

The Capital Controls® Series 17CA3000 Chloralert™ Plus is a state-of-the-art device for rapidly measuring and alarming the ambient presence of low concentrations of toxic gases. The microprocessor-based receiver can accept in put from up to four independent sensors each designed to accurately determine part per million levels of chlorine ...

HORIBA - C-121 - Compact Salt Meter

by HORIBA Europe GmbH

Incorporating the world's first flat sensor, the Cardy C-121 salinity meter is capable of making accurate measurements of sodium ion concentration from a single-drop sample. This meter employs a selective sodium ion electrode that is unaffected by pH and the presence of other ions, enabling the accurate measurement of sodium ion concentrations. At ...

HORIBA - GPS5 - Gas Sampling System

by HORIBA Europe GmbH

HORIBA gas samplers are suitable for volume-correct taking of gaseous samples during emission and emission measurements. This device can be used wherever gases and gaseous components must be inspected.

Need help finding the right suppliers?

Let the XPRTs do the work for you