Air Sampling Equipment

1507 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Air Sampling ×

The Challenger - Hand Held Calibrator

by BGI Instruments     based in Waltham, MASSACHUSETTS (USA)

BGI has designed the best all around calibrator for verifying and calibrating the properties of Industrial Hygiene Air Sampling Instruments. The Challenger® is unsurpassed, when it comes to Economy and features. Our readout is in both Actual flow rate and Standard flow rate. Highly accurate Temperature and Barometric Pressure are also ...

Model 400 - Personal Sampling Pump

by BGI Instruments     based in Waltham, MASSACHUSETTS (USA)

There are a growing number of specialist sampling applications which require flows in the 4 Lpm range for 24 hours. This need is now met by the BGI 400 Personal Sampling Pump. Designed for Indoor Air Quality (IAQ) work, the pump noise level is less than 50 dBA. Collector pressure drops of up to 40 cm of H2O can be maintained throughout the ...

Model AE42 - Portable Aethalometer

by Magee Scientific Company     based in CALIFORNIA (USA)

The Portable Aethalometer Model AE42 measures light absorption by suspended aerosol particles at two wavelengths: 880 nm (IR), quantitative for the mass of ‘Black’ Carbon; and 370 nm (UV), indicating aromatic organic compounds.  The instrument’s analytical performance is identical to the Rack Mount Aethalometer Model AE22, ...

Sampling System

by EcoChem Analytics     based in League City, TEXAS (USA)

In order for a Continuous Emission Monitoring System (CEMS) to function as desired it must be configured to deal with the environment and source type it will operate in. The rude fact is that the application engineering aspect of CEMS may be the most important part and it is in sampling systems where that is most critical. But it is not easy, ...

Tedlar - Sample Bag

by Milco Safety Rental Inc.     based in Houston, TEXAS (USA)

These Tedlarbags are tough, durable, and chemically inert to a wide range of compounds. Bags used in environmental applications typically have a 2 mil film thickness and are applicable for a wide temperature range (98-225 °F). The bags have heat sealed, leak-proof seams and can be used to collect both liquid and air samples. This versatility ...

Model TSP - High Volume Air Sampler

by Petro-Instruments Corp, Ltd.     based in Chatuchak, THAILAND

All TSP High Volume Air Samplers feature accurate collection of total suspended particulate exceeding US EPA Specifications. Air flow through the system is maintained at a constant rate by an electronic probe which automatically adjusts the speed of the sampler to correct for variations in line voltage temperature, pressure and filter loading. ...

Model PM-10 - High Volume Air Sampler

by Petro-Instruments Corp, Ltd.     based in Chatuchak, THAILAND

The PM-10 High Volume Air Sampler is an EPA Designated reference method (RFPS-1287-063) and exceeds the required EPA performance specifications for the measurement of PM10 in Ambient Air. PM10 Size selective high volume air sampling systems are available with. Mass Flow Control (MFC) or Volumetric Flow Control (VFC). Brush or Brush-less motor ...

Aquaria - Model CF20 SQ - Sequential Sampler

by Aquaria     based in Lacchirarella, ITALY

The sampler CF20 SQ offers the possibility to carry out a sequential sampling on 16 channels, each of which programmable indifferently in low or high flows. This possibility allows the operator to sample dust and gas in a single cycle.

Zefon Escort ELF - Personal Air Sampling Pump

by Zefon International, Inc.     based in Ocala, FLORIDA (USA)

Escort ELF air sampling pumps feature a state of the art electronic laminar flow sensor to provide a constant flow control with ± 2.5% regulation of flow rate (from 1-3 lpm) with automatic compensation for changes in battery voltage, temperature, altitude, and sample load. An internal secondary standard calibrates the pump continuously and ...

Zefon International - Mold Sampling Starter Kit

by Zefon International, Inc.     based in Ocala, FLORIDA (USA)

Starter kits are an easy, convenient way to get everything you need to begin sampling for mold. Each kit comes in a convenient toolbox style carrying case and includes basic set-up and use instructions.

Need help finding the right suppliers?

Let the XPRTs do the work for you