Air Sampling Equipment in Cayman Islands

Serving Cayman Islands | Office in Cayman IslandsNear Cayman Islands
920 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Air Sampling ×

  • Location: Latin America ×

  • Location: Cayman Islands ×

Model AE42 - Portable Aethalometer

by Magee Scientific Company     based in CALIFORNIA (USA)

The Portable Aethalometer Model AE42 measures light absorption by suspended aerosol particles at two wavelengths: 880 nm (IR), quantitative for the mass of ‘Black’ Carbon; and 370 nm (UV), indicating aromatic organic compounds.  The instrument’s analytical performance is identical to the Rack Mount Aethalometer Model AE22, ...

Sampling System

by EcoChem Analytics     based in League City, TEXAS (USA)

In order for a Continuous Emission Monitoring System (CEMS) to function as desired it must be configured to deal with the environment and source type it will operate in. The rude fact is that the application engineering aspect of CEMS may be the most important part and it is in sampling systems where that is most critical. But it is not easy, ...

Zefon Escort ELF - Personal Air Sampling Pump

by Zefon International, Inc.     based in Ocala, FLORIDA (USA)

Escort ELF air sampling pumps feature a state of the art electronic laminar flow sensor to provide a constant flow control with ± 2.5% regulation of flow rate (from 1-3 lpm) with automatic compensation for changes in battery voltage, temperature, altitude, and sample load. An internal secondary standard calibrates the pump continuously and ...

Zefon International - Mold Sampling Starter Kit

by Zefon International, Inc.     based in Ocala, FLORIDA (USA)

Starter kits are an easy, convenient way to get everything you need to begin sampling for mold. Each kit comes in a convenient toolbox style carrying case and includes basic set-up and use instructions.

Ormantine - Acid Gas Diffusion Tubes

by Ormantine USA Ltd., Inc.     based in Palm Bay, FLORIDA (USA)

This tube can simultaneously measure a range of acid gases – Hydrogen fluoride, Hydrogen chloride, Nitric acid, Hydrogen bromide, Phosphoric acid and Sulfuric acid (HF, HCl, HNO3, HBr, HPO4 and H2SO4).

Ormantine - Ammonia Diffusion Tubes

by Ormantine USA Ltd., Inc.     based in Palm Bay, FLORIDA (USA)

Ammonia diffusion tubes are suitable for long-term monitoring of ambient Ammonia pollution (sampling times are 2-4 weeks). These samplers are simple to use, requiring no specialist skills or power supply, making them an efficient monitoring option. With very low detection limits (in the low parts per billion range), even low levels of Ammonia ...

Ormantine - Anesthetic Gas Diffusion Tubes

by Ormantine USA Ltd., Inc.     based in Palm Bay, FLORIDA (USA)

Many professionals, including doctors, nurses, dentists and vets use anaesthetic gases on a regular basis. Continuous exposure to these gases can be harmful, so monitoring of both personal exposure and ambient concentrations is important.

Ormantine - Formaldehyde and Aldehydes Diffusion Tubes

by Ormantine USA Ltd., Inc.     based in Palm Bay, FLORIDA (USA)

The largest emissions of Formaldehyde are associated with its manufacture and subsequent use, natural emissions are lower. This tube is used for active (pumped) sampling over a few hours to identify levels of Formaldehyde and other Aldehydes. Concentrations can be measured in the low parts per billion (ppb) range and above.

Ormantine - Hydrogen Sulfide Diffusion Tubes

by Ormantine USA Ltd., Inc.     based in Palm Bay, FLORIDA (USA)

Hydrogen Sulfide (H2S) pollution is associated with an unpleasant odour, as are many other pollutants. Diffusion tubes are an inexpensive way of determining the chemical cause of the odour and are easy to use, requiring no specialist skills. Sampling periods are 2-4 weeks, and therefore the tubes are used to detect the long-term presence of ...

Ormantine - Model DIF300RTU-RA - Ozone Diffusion Tubes

by Ormantine USA Ltd., Inc.     based in Palm Bay, FLORIDA (USA)

Ozone diffusion tubes are Palmes-type diffusion tubes used for long-term monitoring over 2-4 weeks. Ozone can be detected in the low parts per billion to low parts per million ranges. Specifically designed for Ozone absorption, the tubes are inexpensive and require no specialist skills or training, an ideal air monitor for large areas or for ...

Need help finding the right suppliers?

Let the XPRTs do the work for you