Air Sampling Equipment in Europe

570 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Air Sampling ×

  • Location: Europe ×

Spectrex - Model PAS-500 - Micro Air Sampler

by Spectrex Corporation

Battery, pump, electronics and detector tube all in one compact, rugged module, eliminates cumbersome Tygon tubing and charcoal tube holder clipped to lapel. Light (4 oz.) and compact, with flame retardant case. Special clip ensures unit stays firmly in pocket. Flow range: 50-350 ml/min. (5-350 ml/min. with optional, $40, low flow orifice). Full ...

DEKATI - Model DGI-1570 - Gravimetric Impactor

by Envicontrol-Envitec

DGI-1570 (Dekati Gravimetric Impactor) is a cascade impactor designed for measuring particle size distribution from engine exhaust. It is a gravimetric impactor which can replace a standard filter holder and is therefore easy to add to existing emission measurement systems.

Model PKE 52 - Sample Gas Cooler

by Bühler Technologies GmbH

The PKE 52 is the most powerful Peltier cooler in our series. Our quality heat exchangers are available in various materials like stainless steel, Duran glass or PVDF are available as well as one or two gas paths.

Model PKE 5 - Sample Gas Cooler

by Bühler Technologies GmbH

The PKE Models feature a semiconductor Peltier cooling system with an aluminum cooling block. Fitted into the block are one or two removable high efficient heat exchanger made of stainless steel, DURAN-glass or PVDF.

Model AGF - VA - 350 - Sample Gas Filter

by Bühler Technologies GmbH

Sample gas streams must be conditioned to provide particulate and moisture-free gas to the analyser. The AGF-VA-350 provides fine filtration and easy replacement of the filter media without the use of tools. This means the filter media can be changed in a matter of seconds.

HI-Q - Air Sampling & Equipment Tripods

by HI-Q Environmental Products Company

HI-Q's TR-1, TR-1000B, & TR-2000A are Light, Medium, & Heavy Duty Air Sampling & Equipment Tripods capable of extended sampling heights over 58 inches. For lightweight instrumentation, 12 pounds or less, HI-Q recommends the TR-1. For tripod applications which must be capable of supporting up to a 15 pound workload capacity, HI-Q offers ...

Felix IsoKenetic - Stack Train IST Sampler

by Felix Technology Inc.

IST Method 5 sampler systems are manufactured to conform with the construction design criteria and specifications cited in US EPA Method 5, Code of Federal Regulations (40CFR Part 60) and APTD-0581 Document. Our source sampler consoles allow operators to monitor gas velocities, temperatures, pressures and sample flow rates in order to maintain ...

Dust / Dust Sampling System

by CleanAir Europe

This manual system can continuously sample dust from a gas duct under isokinetic conditions. This means that a representative sample of the flow in the chimney can be obtained at the sampling point. Particles are collected on heated filtration media.

Model EPAM-5000 - Environmental Particulate Air Monitor

by Environmental Devices Corp.

The Environmental Particulate Air Monitor model EPAM-5000 provides a complete real-time profile and graphical representation of airborne particulate levels and exposures with data read out in milligrams per cubic meter (mg/m³). This dynamic capability is not possible with using only a gravimetric particulate sampler. The EPAM-5000 combines ...

LEAP - Model Combi PAL-xt - Sample Injector

by LEAP Technologies

Combi PAL-xt Prep and Load System for Static Headspace & Direct GC Injections, PAL COMBI-xt  sample injector grows with your needs, Liquid Injection - Static Headspace –SPME – ITEX Extraction combined in one single instrument.

Need help finding the right suppliers?

Let the XPRTs do the work for you