Air Sampling Equipment in Missouri

Serving Missouri | Office in MissouriNear Missouri
932 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Air Sampling ×

  • Location: USA ×

  • Location: Missouri ×

Model FEP - Gas Sampling Bags

by Jensen Inert Products     based in Coral Springs, FLORIDA (USA)

Prices include Locking Combo Valve with septum. Bags with grommets available. 3/16' OD stem for use with most 1/4' OD plastic and fluropolymer tubing. Bags with multiple fittings available. Swagelok® PTFE and other fittings available upon request

ATEC - Model 2200 - Canister Air Sampler

by ATEC     based in Malibu, CALIFORNIA (USA)

The ATEC Models 2200-1, 2200-12, and 2200-22 Toxic Air Sampler are self-contained air sampling instruments  that have been specifically designed to simultaneously collect air samples into canisters.  The flow rates into the canisters are regulated using electronic mass flow controllers.  A single board internal computer wi

Dekati - Model DGI - Gravimetric Impactor

by Particle Instruments, LLC     based in Vadnais Hights, MINNESOTA (USA)

A cascade impactor with cutpoints of 2.5, 1.0, 0.5 and 0.2 microns and a back-up filter. The particles are collected on Ø47 mm filters with sample flow rate of 70 lpm. DGI is typical used in combustion measurements including automotive emission testing, but it is can be applied to any measurements where particles in its operational range ...

Model TFA41 - Filter Papers for High Volume Air Samplers

by Staplex - Air Sampler Division     based in Brooklyn, NEW YORK (USA)

Ashless paper. 95% collection efficiency of 1 micron. 58% DOP on 0.3 micron particles. Easily countable for Alpha particles, obtaining 70% count and a penetration absorbtion of approximately 30%. Good efficiency for industrial dusts and for particulate matter size 10 microns and under to submicron to .01 micron. Sampler may be operated for ...

Tedlar - Model 24655 - Gas Sampling Bag

by Sigma-Aldrich Co., LLC     based in Bellefonte, PENNSYLVANIA (USA)

General description Tedlar is recommended in several US EPA methods for sampling VOCs and sulfur compounds. Our Tedlar is made from a high-quality 2 mil Tedlar film for superior inertness, impermeability, sample integrity and good recovery data. Our Push Lock Valve (PLV) and seam-sealing process ensure that these bags are sturdy and virtually ...

F&J - Model GAS-EDL-28B - Global Low Volume Air Sampling System (110V)


The Model GAS-EDL-28B Global Air Sampling System is a microprocessor controlled low volume air sampler. The pump is mounted on a base plate within a weather resistant aluminum environmental enclosure having four rubber feet. Handles are provided on the enclosure to facilitate transportation. The enclosure rating is IPX3.

Dräger - Short-Term Detector Tubes

by Apollo Safety Inc.     based in Fall River, MASSACHUSETTS (USA)

For short-term measurements more than 160 Dräger-Tubes are available to measure the so-called spot concentrations of specific gases.

MSA General-Purpose Air Sampling Cassette

by Apollo Safety Inc.     based in Fall River, MASSACHUSETTS (USA)

MSA’s General-Purpose Cassette is a 5µ pore size PVC sample cassette that can be used for silica sampling or for all airborne particulate collection (not limited to quartz or silica).

Carbon Monoxide Sensidyne Tube

by Apollo Safety Inc.     based in Fall River, MASSACHUSETTS (USA)

Sensidyne Tube-Carbon Monoxide 1-50 PPM box of 10.

Ammonia Sensidyne Tube

by Apollo Safety Inc.     based in Fall River, MASSACHUSETTS (USA)

Sensidyne Tube-Ammonia 5-260 PPM, 10 in a box.

Need help finding the right suppliers?

Let the XPRTs do the work for you