Calibration Systems Equipment in Malaysia

629 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Calibration Systems ×

  • Location: Asia & Middle East ×

  • Location: Malaysia ×

Model 381-NMS - Permanent Noise Monitoring System

by Larson Davis, a division of PCB Piezotronics

An Integrated Hardware & Software System with Digital Communication and an Open Interface for Long Term Noise Monitoring Applications. The Model 831-NMS permanent noise monitoring system is designed for long term monitoring around airports, industrial facilities, motorsport complexes, wind farms, mining operations, and within the general ...

SoundExpert - LxT - Noise Monitoring Kit

by Larson Davis, a division of PCB Piezotronics

In addition to the SoundExpert LxT meter, this kit includes the EPS042 protection case and D-cell battery pack, the EPS2108-2 microphone protection shroud, and EXC010 10 ft. cable. Using D-cell alkaline batteries, allows the noise monitor to be smaller and lighter; avoid the expense of shipping heavy lead acid batteries and the hassle of ...

SoundTrack - LxT N/Forcer - Sound Level Meters

by Larson Davis, a division of PCB Piezotronics

A Real Breakthrough in Noise Enforcement. For Community Noise Ordinance Measurements and Nuisance Complaint Response. Portable, compact and simple to use, the Larson Davis LxT N/Forcer Sound Level Meter produces accurate, citation-ready noise data on-the-spot, with its compact portable printer.

SoundTrack - LxT Model LXT1-QPR - Firearms Acoustic Analysis

by Larson Davis, a division of PCB Piezotronics

Quantitative Measurements of Sound Pressure Levels Generated by Firearms with & Without Suppression Devices. Many firearm examiners are tasked with determining whether installation of a suppressor on a firearm results in a “perceptible” reduction of the sound pressure level of a gun. The Larson Davis SoundTrack LxT provides this ...

Model CAL200 - Precision Acoustic Calibrator

by Larson Davis, a division of PCB Piezotronics

The Model CAL200 is a battery operated, temperature compensated precise Class 1 Sound Calibrator for use with microphones. Adaptors allow the calibrator to be used with 1/4 and 3/8' microphones. The following specifications apply: Calibration frequency = 1kHz. Output Sound Pressure Level is selectable from 94 or 114 dB re 20Pa ( 0.2dB).

Model CAL250 - Precision Acoustic Calibrator

by Larson Davis, a division of PCB Piezotronics

The Model CAL250 is a battery operated, temperature compensated precise Class 1 Sound Calibrator for use with 1 microphones for the performance measurement and calibration of Sound Level Meters and Dosimeters. Adaptors allow the calibrator to be used with 1/4,1/2 and3/8 microphones. The following specifications apply: - Calibration frequency = ...

Model CAL150 - Precision Acoustic Calibrator

by Larson Davis, a division of PCB Piezotronics

IEC 60942 Class 2 Handheld Sound Level Calibrator for ½” microphones at 1000 Hz Used for Sound Level Meters and Noise Dosimeters.

Model CAL291 - Precision Acoustic Calibrator

by Larson Davis, a division of PCB Piezotronics

The Model CAL291 is a dual channel Sound Calibrator. It is designed for measuring the residual intensity of sound intensity measurement systems. The following specifications apply: - When used with external signal generators the CAL291 Calibrator shall produce matched dual channel outputs of: ٠Sinusoids; Pink/White BB Noise. ٠1/3 ...


Environics - Series 7000 - Double Regulated Zero Air Generator

by Environics, Inc.

The Environics Series 7000 Zero Air Generator is a pure air generator system that is capable of continuous delivery of up to 20 standard liters per minute (SLPM), 30 pounds per square inch (PSI) of dry, contaminant-free air.  The ZAG is a powerful stand-alone unit, so there is no need for you to worry about an external compressed air supply.   The ...


Brüel & Kjær - Type 4448 - Personal Noise Dose Meter

by Brüel & Kjær Sound & Vibration Measurement A/S

A shoulder-mounted, cable-free noise dose meter that simultaneously measures all parameters required by Noise at Work standards. Simple two-button operation, an informative LCD display and an auto-calibration function make this unit very easy to use. The built-in memory and rechargeable battery provide several working days of measurement. Type ...

Need help finding the right suppliers?

Let the XPRTs do the work for you