Conductivity Monitoring Equipment in Brunei Darussalam

Served | Office inNear
369 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Conductivity Monitoring ×

  • Location: Asia & Middle East ×

  • Location: Brunei Darussalam ×

In Situ Hydraulic Conductivity Tests: Hooghoudt model

by Eijkelkamp Agrisearch Equipment     based in Giesbeek, NETHERLANDS

Determination of the water permeability, is important for agricultural- and for environmental soil research. On the basis of the permeability factor (K-factor) irrigation- and drainage systems are designed. Also with respect to the extend of the spreading of possible pollution the permeability factor of the soil is of great importance.

In Situ Hydraulic Conductivity Tests: Rainfall Simulator

by Eijkelkamp Agrisearch Equipment     based in Giesbeek, NETHERLANDS

The extent to which the soil is sensitive to erosion is determined largely by the composition of the soil. Knowledge of the sensitivity to erosion is important for the development of a certain plot. The sensitivity to erosion is hard to measure. Absolute values can not be obtained. It is, however, possible to obtain a reasonable indication by ...

Model WEC/WDEC410 - Toroidal Conductivity Controllers

by Walchem, IWAKI America Inc     based in Holliston, MASSACHUSETTS (USA)

The WEC/WDEC410 Series Single and Dual Input Electrodeless Conductivity Controllers measure conductivity of a solution via an encapsulated, non-contacting sensor to control replenishment pumps and alarms. They may be installed in a variety of very harsh chemical control applications, including oily cleaner baths, chromates, rinse tanks, fume ...

YSI - Model EC 300 - Conductivity/Salinity/Temperature Meter

by Forestry Suppliers, Inc.     based in Jackson, MISSISSIPPI (USA)

This compact, handheld meter measures conductivity, specific conductance, salinity, and temperature. Features include a super-stable four-electrode conductivity cell, calibration back-up, convenient one-hand operation, a user-friendly interface, and a water resistant, splash resistant case (meets IP-65). Two cable lengths available. One-year ...

Oakton - Hand-Held Conductivity/TDS Meter

by Forestry Suppliers, Inc.     based in Jackson, MISSISSIPPI (USA)

This advanced meter simultaneously displays TDS and temperature or conductivity and temperature, ranges for TDS readings automatically, and is able to store one TDS calibration point along with five conductivity calibration points. Selectable read outs as ppm and ppt, or as mg/l and g/l. Probe is 12 mm in diameter and has a 3´ cable. Other ...

Oakton¬ pH/Con 650 Meter with Probe

by Forestry Suppliers, Inc.     based in Jackson, MISSISSIPPI (USA)

Connect a pH or ISE and a conductivity or dissolved oxygen probe at the same time to simultaneously measure your choice of pH, mV, or ISE and conductivity or dissolved oxygen! Other features include datalogging of up to 500 data points with GLP compliance, wireless IrDA communication for truly waterproof interfacing capabilities, user-selectable ...

Dakota - Electrical Conductivity (EC)

by Dakota Technologies, Inc.     based in Fargo, NORTH DAKOTA (USA)

Dakota Technologies is pleased to announce the availability of our Electrical Conductivity (EC) instrument, a complimentary module for UVOST, TarGOST, and Soil Color (SCOST). Different soil types will conduct electricity differently depending on particle size and mineralogy. For example, clays generally will have high conductivity while gravels ...

Model Q45CT - Toroidal Conductivity Monitor

by Analytical Technology, Inc. (ATI)     based in Delph, UNITED KINGDOM

ATI’s Model Q45CT Toroidal Conductivity system is designed for online monitoring of chemically aggressive process solutions. This sensor consists of two metallic ribbon coils that are fixed in place by the sensor jacket material. The drive coil is used to induce a current in the process solution. The second sensing coil is used to measure ...

WET Water, Conductivity& Temp. Sensor

by Dynamax Inc     based in Houston, TEXAS (USA)

The W.E.T Sensor’s name comes from the first letter of each measured quantity, reflecting the fact that it is a three-in-one sensor. The W.E.T Sensor has applications in precision horticulture and soil science research and is usable in both soils and growing substrates. It is unique in its ability to measure pore water conductivity (ECp), ...

Stevens Greenspan - Model EC 250/EC 1200 - Electrical Conductivity Sensors

by Stevens Water Monitoring Systems, Inc.     based in Portland, OREGON (USA)

The Greenspan Electrical Conductivity Sensors provide highly accurate conductivity measurements in a wide range of hydrological applications. Exceptional reliability and chemical resistance are guaranteed by a state of the art toroidal measuring system. Advanced microprocessor technology provides highly accurate temperature compensated ...

Need help finding the right suppliers?

Let the XPRTs do the work for you