air analyses Equipment in Mauritania

Served | Office inNear
55 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Environmental Analysis ×

  • Keyword: air analyses ×

  • Location: Africa ×

  • Location: Mauritania ×


TAPI - Model T320 - Gas Filter Correlation N2O Analyser

by Enviro Technology Services plc     based in Stroud, UNITED KINGDOM

The Model T320 N2O analyser measures Nitrous Oxide by comparing infrared energy absorbed by a sample to that absorbed by a reference gas according to the Beer-Lambert law. Using a Gas Filter Correlation Wheel, a high-energy IR light source is alternately passed through a N2O filled chamber and a chamber with no N2O present. The light path then ...

Serinus - Model 56 - TS Analyser

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The Serinus 56 TS analyser uses the HTO1000 external converter for continuous measurement of TS. The Serinus range of analysers have been designed using our experience and knowledge gained from operating large air quality monitoring networks for more than 35 years. The result, instruments that integrate seamlessly into continuous monitoring ...

Gasmet - In-Situ Multicomponent FTIR Gas Analyser

by Gasmet Technologies Oy     based in Helsinki, FINLAND

Gasmet In-Situ analyser consists of a sample cell inserted into the stack or duct, heated steel mounting flange and the rugged GICCOR interferometer unit in an IP65 enclosure that is directly attached to the flange.

Gasmet - Model FCX-Series - FTIR Process Gas Analyzer

by Gasmet Technologies Oy     based in Helsinki, FINLAND

Gasmet FCX is a wall-mounted gas analyser which combines the Gasmet Cx-series analyser with a built-in computer in a dust and moisture protected cabinet. The FCX – series analyzers are especially well suited for process gas monitoring or workplace air quality measurements.

Gasmet - Model CX4000 - Multicomponent FTIR Gas Analyzer

by Gasmet Technologies Oy     based in Helsinki, FINLAND

The Gasmet™ CX4000 is used in continuous emissions monitoring, process control and other applications where multiple gas compounds need to be monitored with great accuracy, such as waste incineration plants and cement kilns.CX4000 FTIR gas analysers are operated by an external industrial PC operating Calcmet™ software. Sample cell heating (180 C) ...

AirTOXICBTX - Model PID - BTEX and 1,3 Butanediene Analyzer

by Chromatotec Group     based in Saint Antoine, FRANCE

A GC/PID for automatic monitoring of BTEX in air, water and soils. This instrument uses a port valve with a single absorbent trap, and a 30 meter metallic 0.28 mm ID column. Minimum detection level as low as 10 ppt for application Benzene or 1,3-Butadiene in ambient air. Miniaturization, sensitivity, mobility and flexibility are its main features. ...

TAPI - Model T200 - Chemiluminescence NO/NO2/NOx Analyser

by Enviro Technology Services plc     based in Stroud, UNITED KINGDOM

The Model T200 NO/NO2/NOx analyser uses the proven chemiluminescence detection principle, coupled with state-ofthe-art electronics to allow accurate and dependable low level measurements for use as an ambient analyser or dilution CEMS monitor.

TAPI - Model T201 - Chemiluminescence NH3 Analyser

by Enviro Technology Services plc     based in Stroud, UNITED KINGDOM

The Model T201 combines a specially configured chemiluminescence analyser with an external thermal converter to give stable and repeatable NH3 measurements at very low levels. In addition, the T201 provides simultaneous values for NO, NO2, and NOx concentrations. The T201 is ideal for trace ammonia monitoring applications in ambient air as well as ...

TAPI - Model T400 UV - Absorption O3 Analyser

by Enviro Technology Services plc     based in Stroud, UNITED KINGDOM

The Model T400 UV Absorption analyser uses a system based on the Beer-Lambert law for measuring low ranges of ozone in ambient air. A 254 nm UV light signal is passed through the sample cell where it is absorbed in proportion to the amount of ozone present. Periodically, a switching valve alternates measurement between the sample stream and a ...

TAPI - Model T100UV - Fluorescence SO2 Analyser

by Enviro Technology Services plc     based in Stroud, UNITED KINGDOM

The Model T100 uses the proven UV fluorescence principle, coupled with a state of the art user interface to provide easy, accurate, and dependable measurements of low level SO2. Exceptional stability is achieved with the use of an optical shutter to compensate for PMT drift and a reference detector to correct for changes in UV lamp intensity. A ...

Need help finding the right suppliers?

Let the XPRTs do the work for you