automatic analyses Equipment

64 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Environmental Analysis ×

  • Keyword: automatic analyses ×

Model COLI 3000 - Automatic Analyser

by SERES ENVIRONNEMENT     based in AIX EN PROVENCE Cedex 3, FRANCE

N-LINE MONITORING with AUTOMATIC SAMPLING of Total Coliform or E.Coli ensures a faster detection of pollution.

Automatic Moisture Analyser System

by Siebtechnik GmbH     based in Mülheim an der Ruhr, GERMANY

This fully automatic system can determine the moisture content of bulk-material samples of up to 6 kg in weight. For this purpose, the AMAS can be integrated in an automatic sampling unit, thereby allowing the analysis to be carried out immediately after the sample has been taken from the material. The animation shows the AMAS with an eccentric ...

multi N/C - Model 3100 - TOC/TNb Analyzer

by Analytik Jena AG     based in Jena, GERMANY

No matter whether ultra-pure water or waste water, multi N/C 3100 is suitable for all liquid samples. This is made possible by the combination of catalytic high-temperature combustion, VITA, the Focus Radiation NDIR Detector, as well as flow injection with intelligent rinsing technology for particle-containing samples. In addition, multi N/C 3100 ...

QuickTOCairport - TOC Analyser

by LAR Process Analysers AG     based in Berlin, GERMANY

Exact determination of TC, TOC (TRUE TOC) and TIC. Measurement Range: 0.1-100 mg/l, 2-400 mg/l, 5-2,000 mg/l, 100-15,000 mg/l, 100-50,000 mg/l, further options available. Automatic ranging. Response Time TOC: 3 minutes. Proven thermal oxidation principle. Highest combustion temperature available (1,200°C). Catalyst-free. Multi-stream ...

REDWAVE - Model SAS - Sample Analysing System

by Redwave a Division of BT-Wolfgang Binder GmbH     based in Gleisdorf, AUSTRIA

Sample Analysing System for Glass / Plastics / Paper / Wood / Metal / E-Scrap / Minerals. Input sample analysing (REDWAVE SAS) For analysis of the infeed material. Samples are taken from the input material received from different suppliers for being analysed before processing. For analysing the samples run through a REDWAVE SAS (Sample Analysing ...

Orthodyne - Model THC5000 - Total Hydrocarbon (THC) Analyser, PPM Range

by Process Analysers Systems Ltd     based in Oxfordshire, UNITED KINGDOM

The THC5000 is a continuous analytical system that measures the total hydrocarbon (THC) in ppm level in various gases, such as Oxygen, Air, Carbon Dioxide, Nitrogen, Argon, Helium and Hydrogen.

Orthodyne - Model AZ5000 - Trace Nitrogen in Argon Analyser, PPM Range

by Process Analysers Systems Ltd     based in Oxfordshire, UNITED KINGDOM

The AZ5000 is a continuous analytical system that measures N2 impurity in ppm level in Argon or in Helium.

Teledyne - Model BDS Series - ppb - Trace Oxygen Analysers

by Process Analysers Systems Ltd     based in Oxfordshire, UNITED KINGDOM

The BDS series feature the new, high sensitivity Bi-potentiostat Driven Sensor (BDS). The replenishable BDS is a culmination of an extensive R&D effort in conjunction with the semiconductor industry. The BDS achieves greater sensitivity (LDL of 250 ppt), faster response/recovery, and ease-of-use over any previous wet-cell oxygen sensor ...

Oxford Instruments - Model CMI153 - Coating Thickness on Ferrous and Non-Ferrous Substrates and Structures

by Oxford Instruments Industrial Analysis     based in Abingdon, UNITED KINGDOM

Dual technology features automatic selection of magnetic induction or eddy current measurement techniques. Built upon our highly successful CMI150 architecture the CMI153 delivers an improved measurement probe with enhanced performance and superior substrate sensitivity. Useful in a wide variety of settings, the CMI153 measures non-conductive ...

Oxford Instruments - Model CMI250 - Magnetic Induction and Eddy Current Measurement

by Oxford Instruments Industrial Analysis     based in Abingdon, UNITED KINGDOM

Dual Technology Features Magnetic Induction and Eddy Current Measurement Techniques with Statistical Analysis and PC Interface. The CMI250 is a feature rich instrument built upon our established Eddy Current / Magnetic Induction Dual Probe Technology. The instrument offers factory and user calibrations, automatic temperature compensation, base ...

Need help finding the right suppliers?

Let the XPRTs do the work for you