materials analyses Equipment in Germany

Serving Germany | Office in GermanyNear Germany
50 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Environmental Analysis ×

  • Keyword: materials analyses ×

  • Location: Europe ×

  • Location: Germany ×

Lancom - Model 200 - Monitor Fuel Additive Performance In Oil/Coal Fired Boilers

by Land Instruments International     based in Dronfield, UNITED KINGDOM

It is designed specifically for plant requiring only periodic monitoring of the sulphuric acid dewpoint temperature for boiler efficiency checks, corrosion protection and evaluation of the effectiveness of corrective measures such as fuel additives and changes in the combustion conditions.

Certipur - Reference Material for Reliable Calibration in pH Measurement

by Merck Millipore     based in Darmstadt, GERMANY

Accuracy of pH measurement results are directly affected by the buffer reference materials used in calibration. Merck Millipore offers you a distinguished range of buffer solutions and substances for the exact calibration of your pH measurement equipment. Using Merck Millipore’s Certipur® reference materials, you benefit from maximum ...

LECO - Model 632 Series - Sulfur/Carbon Analysis

by LECO Instrumente GmbH     based in Mönchengladbach, GERMANY

The SC632 uses high temperature combustion followed by Infrared (IR) detection to determine the sulfur and carbon content in a wide variety of organic materials such as coal, coke, and oils, as well as some inorganic materials such as soil, cement, and limestone. Carbon and sulfur determinations can be done simultaneously or ...

LECO - Model CS744 Series - Carbon and Sulfur Determinator

by LECO Instrumente GmbH     based in Mönchengladbach, GERMANY

LECO’s CS744 Series will redefine the way you determine carbon and sulfur in metals, ores and other inorganic materials. Using extensive customer feedback and innovative engineering, our latest instrumentation takes advantage of an immersive software platform that will increase usability and lower the cost-per-analysis.

Materialfox - Multisensor

by Scanntronik Mugrauer GmbH     based in Zorneding, GERMANY

The Materialfox Multisensor was designed as an additional module for the Materialfox and simply connects to the universal bus of the data logger. In conjunction with the Materialfox Multisensor, our data logger can be connected to a further six or eight measuring locations (depending on the material being tested), where it analyses and records the ...

Formaldehyde Analyser

by Medizin- und Labortechnik Engineering GmbH (MLE)     based in Radebeul, GERMANY

The formaldehyde analyser is designed for industrial applications. With it the emission of formaldehyde of wood based material can be measured online. This automatic analysis of formaldehyde is robust and fast and a real alternative to conventional methods. Within short periods of time formaldehyde contents between 0,05 … 25 mg/l can be analysed ...

Prisma - Model QMA 200 F - Quadrupol-Analyzer, With Iridium Yttriated Filament

by Pfeiffer Vacuum     based in Asslar, GERMANY

QMA 200 F, Prisma Quadrupol-Analyzer, with iridium yttriated filament. Bakeout temperature: 200 °C. Bakeout temperature: analyzer: 200 °C. Detector: Faraday. Filament: Iridium yttriated. Flange (in): DN 40 CF-F. Ion source: Open, 2 filaments. Operating temperature: analyzer: 150 °C. Rod system: Diameter: 6 mm. Rod system: Length: 100 ...

QuickOIL - Oil in Water Analyser

by LAR Process Analysers AG     based in Berlin, GERMANY

Exact determination of Oil-in-Water (OIW). Measurement Range: 0.1-100 mg/l, 2-400 mg/l, 5-2,000 mg/l, 100-15,000 mg/l, 100-50,000 mg/l, further options available. Proven thermal oxidation principle. Highest combustion temperature available (1,200°C). Catalyst-free. Response Time: 3 minutes. Multi-stream measurements (optional). No filtration ...

Automatic Moisture Analyser System

by Siebtechnik GmbH     based in Mülheim an der Ruhr, GERMANY

This fully automatic system can determine the moisture content of bulk-material samples of up to 6 kg in weight. For this purpose, the AMAS can be integrated in an automatic sampling unit, thereby allowing the analysis to be carried out immediately after the sample has been taken from the material. The animation shows the AMAS with an eccentric ...

Oxford Instruments - Model X-MET7000 Series (EDXRF) - Handheld XRF Analyser

by Oxford Instruments Industrial Analysis     based in Abingdon, UNITED KINGDOM

The X-MET7000 Series handheld XRF analyser is the flexible & easy to use tool of choice for elemental analysis in a wide range of industries. Based on the proven technique of energy dispersive X-ray fluorescence (EDXRF), the X-MET7000 Series is engineered for high performance and reliability, guaranteeing fast, non-destructive materials ...

Related Terms for materials analyses

Need help finding the right suppliers?

Let the XPRTs do the work for you