ambient air sampling Equipment in Ontario

Serving Ontario | Office in OntarioNear Ontario
32 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Environmental Sampling ×

  • Keyword: ambient air sampling ×

  • Location: Canada ×

  • Location: Ontario ×

Tekran - Model 1110 - Synchronized - Two Port Sampling System

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1110 Synchronized Two Port Sampling System gives the Model 2537 Mercury Vapor Analyzer the ability to sample two unique sources. Switching between the two sources is synchronized with the instrument sampling cycle and is fully programmable by the user. This is particularly useful for flux chamber studies to measure inlet and ...

Tekran - Model 1115 - Synchronized Multi-Port Sampling System

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 1115 Synchronized Multi-Port Sampling System works in a similar fashion to the Model 1110, but the Model 1115 allows sampling of up to eight separate input sources. Switching between the sources is synchronized with the instrument sampling cycle. The number of sampling cycles in each position is programmable by the user. The Model ...

HORIBA - Model APHA-370 - Ambient THC Monitor / Ambient Air Monitor

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

The APHA-370 continuously monitors atmospheric THC, NMHC, and CH4 concentrations using a cross-flow modulated selective combustion type method combined with a hydrogen ion detection method. The APHA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy.

HORIBA - Model APNA-370 - Ambient NOx Monitor

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

The APNA-370 continuously monitors atmospheric NOX, NO2, and NO concentrations using a cross-flow modulated semi decompression chemiluminescence method. The APNA-370 employs an independent, internal dry-method sampling device to achieve the highest levels of sensitivity and accuracy. The dry method, due to its minimal maintenance requirements and ...

Scentroid - Model DR300 - SAMPLING DRONE

by Scentroid, a Division of IDES Canada.     based in Markham, ONTARIO (CANADA)

Scentroid DR300 Sampling drone adds a new dimension to air sampling. The DR300 Sampling drone can be used to sample ambient air at heights of up to 125 meters above ground level or directly sample from stack plumes. Height sampling and direct plume sampling opens a new avenue that can be used to increase accuracy of emission and impact ...

Scentroid - Model SB 10 - Vacuum Chambers

by Scentroid, a Division of IDES Canada.     based in Markham, ONTARIO (CANADA)

The Scentroid Vacuum Chambers are easy to use, portable, and cost-effective air sample collection devices. The chamber comes in multiple sizes to fit bags of up to 10L, 25L, and even 50L. A built in rechargeable vacuum pump, creates a vacuum inside the chamber. The vacuum around the air sample bag forces the air sample to enter the collection bag ...

F&J - Model DF-1 Series - Portable Air Sampling System (110V)

by F&J SPECIALTY PRODUCTS, INC.     based in Ocala, FLORIDA (USA)

The Model DF-1 portable air sampling system with a digital flowmeter is a low-volume air sampler consisting of an oil-less, carbon vane vacuum pump, with a constant air flow regulator for use where a nearly constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass ...

HI-Q - Model PM-10 Series - High Volume Air Sampling Systems

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

The EPA Clean Air Act of 1987 established a measuring standard to evaluate and monitor the health effects of thoracic inhaleable particles. The standard was set that in order for an environment to be healthy, in terms of these particles, it must have a concentration of less than 150 mg/m3 of particles with aerodynamic diameters less than 10 ...

F&J - Model DF-EDL-22 Series - Environmental Air Sampling System

by F&J SPECIALTY PRODUCTS, INC.     based in Ocala, FLORIDA (USA)

The DF-EDL-22 environmental air sampling system with digital flowmeter is a low-volume air sampler consisting of brushless centrifugal blower with automatic electronic flow control. The vacuum air movement system is mounted on a removable base plate, which can be secured within the GFCI protected aluminum environmental weatherhouse, Model WH-3 ...

F&J - Model GAS-EDL-28B - Global Air Sampling System (110V)

by F&J SPECIALTY PRODUCTS, INC.     based in Ocala, FLORIDA (USA)

The Model GAS-EDL-28B Global Air Sampling System is a microprocessor controlled low volume air sampler. The pump is mounted on a base plate within a weather resistant aluminum environmental enclosure having four rubber feet. Handles are provided on the enclosure to facilitate transportation. The enclosure rating is IPX3.

Related Terms for ambient air sampling

Need help finding the right suppliers?

Let the XPRTs do the work for you