fine particle sampling Equipment in Armenia

Served | Office inNear
14 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Environmental Sampling ×

  • Keyword: fine particle sampling ×

  • Location: Asia & Middle East ×

  • Location: Armenia ×

Model ELPI+ - High Temperature Measurement Instrument

by Dekati Ltd.     based in Kangasala, FINLAND

The Dekati High Temperature ELPI+­™ (HT-ELPI+™) is a new version of the Dekati ELPI+™ that enables real-time measurement of particle size distribution from 6 nm up to 10 µm with 10 Hz sampling rate. The High Temperature ELPI+™ allows direct measurement of up to 180 °C aerosol sample without the need to cool ...

Model ELPI+ - Electrical Low Pressure Impacto

by Dekati Ltd.     based in Kangasala, FINLAND

ELPI+ (Electrical Low Pressure Impactor) is an improved version of the widely used and well characterized ELPI -system. ELPI+ enables measurement of real-time particle size distribution and concentration in the size range of 6 nm – 10 μm with 10 Hz sampling rate. The ELPI+ features include real-time stand-alone operation, wide sample ...

Dekati - Model FPS - Fine Particle Sampler

by Dekati Ltd.     based in Kangasala, FINLAND

The Dekati Fine Particle Sampler is a guaranteed solution for diluting and conditioning aerosol and gaseous samples for measurement instruments. This versatile dilution system allows dilution factor adjustment between 1:20 and 1:200 and first stage dilution temperature settings between 0 and 350 °C. Temperatures and pressures in different ...

Vertek ConeSipper - Simultaneous In-line Sampling Module

by Vertek Cone Penetration Test Equipment     based in Randolph, VERMONT (USA)

Simultaneous In-line Sampling -The Vertek ConeSipper module attaches directly behind a standard CPT cone to obtain gas or water samples as the CPT probe is advanced, saving substantial money and time by eliminating duplicate soundings. Developed and patented by Westinghouse Savannah River Corporation (WSRC) and Applied Research Associates, Inc., ...

Shelby - Tube Samplers

by Art’s Manufacturing and Supply, Inc. (AMS Inc.)     based in American Falls, IDAHO (USA)

Shelby tube samplers consist of a one-piece, thin-walled, hollow steel tube with an open-end that has been honed to a cutting edge. The main purpose of the Shelby Tube sampler is to recover relatively undisturbed soil samples suitable for laboratory tests of engineering properties such as strength, compressibility, permeability, and density. They ...

Deed - Model DEED - Engine Exhaust Diluter

by Dekati Ltd.     based in Kangasala, FINLAND

The Dekati Engine Exhaust Diluter DEED is a fully EURO5b conform engine exhaust conditioning system. In contrast to multi-stage dilution systems in general, DEED is a simple, easy-to-use system that conditions the sample precisely and in a repeatable manner every time. The DEED fulfils all requirements and recommendations set in EURO5b standard ...

Dekati - Model Diluter - Aerosol and Gaseous Sampler

by Dekati Ltd.     based in Kangasala, FINLAND

The Dekati Diluter DI-1000 is a low-cost, simple and easy-to-operate device for diluting aerosol and gaseous samples from any source. The simplicity, ability to withstand high temperatures and the robustness of the all stainless-steel design have made it a widely renowned choice for dilution of combustion aerosols.The nominal dilution factor for a ...

Model 270SF Series - Heated Stack Filter

by Universal Analyzers Inc. - AMETEK, Inc     based in Carson City, NEVADA (USA)

The 270SF is a Heated Stack Filter Assembly consisting of the filter body mounted in a NEMA 4X Fiberglass Enclosure or Stainless Steel Enclosure. An optional blowback system may be provided to allow the blowback to occur on command from a computer, data logger, PLC, or external switch mounted in a safe area.

CETAC - Model G2 - Analyte Excimer Laser Ablation System

by Teledyne CETAC Technologies     based in Omaha, NEBRASKA (USA)

CETAC Technologies and Photon Machines Inc. have launched the next generation of excimer laser ablation system, the G2, which includes the acclaimed HelEx 2-volume sample cell and its unique adaptive inner cell. This new generation of Analyte system delivers finely controlled, flat (homogenized) ablations with high sensitivity and split second ...

Solid Phase Extraction Solutions

by PerkinElmer, Inc.     based in Waltham, MASSACHUSETTS (USA)

PerkinElmer® Solid Phase Extraction (SPE) solutions deliver unsurpassed reproducibility, thanks to a unique bed-packing technique and spherical media. Columns are evenly and consistently filled with particles sized for optimum distribution, delivering a level of performance unattainable with the irregularly shaped silica used in competitive ...

Related Terms for fine particle sampling

Need help finding the right suppliers?

Let the XPRTs do the work for you