gas sampling pumps Equipment in Iowa

Served | Office inNear
183 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Environmental Sampling ×

  • Keyword: gas sampling pumps ×

  • Location: USA ×

  • Location: Iowa ×

Model BCR 01 - Sample Gas Coolers

by AGT Thermotechnik GmbH & Co.KG     based in Erkelenz, GERMANY

BCRs are the allround talents among compressor coolers. They are installed in all applications where pure coolers are needed without additional conditioning equipment.  BCR sample gas coolers can be optionally equipped with PVDF-, glass- and/or stainless-steel-heat-exchangers. Thus BCR sample gas coolers can cool down nearly every gaseous ...

Model 57000 Series - Bladder Pumps

by GeoPump, Inc.     based in Medina, NEW YORK (USA)

GeoPump dedicated bladder pumps meet rigid U.S. EPA requirements for ground water monitoring, while offering the highest flow rates of any bladder pump of equivalent size. This enhanced performance results from an offset center tube and check valves which produce a straight water path. The larger bore and unrestricted flow path combine to produce ...

Micro-Flo Bladder Pumps

by GeoPump, Inc.     based in Medina, NEW YORK (USA)

GeoPump Micro-Flo bladder pumps have been specifically designed to meet the most stringent U.S. EPA sampling guidelines for low-flow methods. Utilizing a highly durable, yet flexible membrane, the pump is a true bladder squeeze design that prevents the drive air from contacting the liquid sample, assuring no loss of gas sensitive parameters.

Casella-CEL - Tuff Standard Pumps

by Casella CEL Inc.     based in Buffalo, NEW YORK (USA)

Key features of the Casella Tuff Standard Pumps: Tuff Standard entry level personal sampling pumps. Excellent entry model for basic sampling measurements. Available as 3 and 4.5 l/m versions. Choice of regular or enhanced rechargeable NiMH battery pack. Available with or without drop in charger unit. Simple 4 button operation. Set flow rate with ...

Model XC-260 - Manual Mercury Sampling Console

by Apex Instruments, Inc.     based in Fuquay-Varina, NORTH CAROLINA (USA)

The XC-260 Hg Source Sampler is designed for performance testing, base line studies, and profiling.  This low-cost, portable, and field-proven audit system is easy to learn and use, and is ideal for sampling mercury emissions based on Reference Method 30B of the U.S. EPA Appendix K, 40 CFR, Part 60. The XC-260 Hg Audit System is used for ...

Model MAK 10-2 - Sample Gas Conditioning Systems

by AGT Thermotechnik GmbH & Co.KG     based in Erkelenz, GERMANY

MAKs are compressor coolers for highest demands of sample gas quality.  With optional components (pre-separator, filter, flowmeter, acid dosage, humidity sensor, sample gas pump) you can upgrade MAK sample gas coolers to complete integrated sample gas conditioning systems. The flexible, modular design ensures optimal compatibility to all ...

RAE Systems MultiRAE - Piston Hand Sampling Pump

by Argus-Hazco     based in Chesterfield, MICHIGAN (USA)

RAE Systems' Hand Pump is for use with RAE Systems' Gas Detection Tubes. The Hand Pump, along with the Tubes, offers quick, on-the-spot measurements of many gases and vapors at low cost without the need for calibration. Springless piston design for accurate 50 and 100 cc volumes along with a tube tip breaker and glass tip holder.

HI-Q - Dry Gas Totaling Meters

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q offers a wide range of dry gas totaling meters which, when incorporated in an air sampling system, are an excellent source for recording the total volume of air sampled. The gas-totaling meter may either be connected to have gas supplied through the inlet (connected to the exhaust of a positive displacement pump) or drawn through the outlet ...

Well Development Swabs

by GeoPump, Inc.     based in Medina, NEW YORK (USA)

GeoPump Well Development Swabs offer a simple, effective and convenient way to accomplish this important task. Development swabs are typically used in conjunction with GeoPump gas-drive pumps simply by attaching the swab assembly to the threaded intake of the pump. This effectively increases the diameter of the pump to enable the user to produce ...

Sensidyne Sample Tubes & Pump

by Geotechnical Services, Inc     based in Tustin, CALIFORNIA (USA)

Sensidyne detector tubes will give quick results on the concentration of your target gas or vapor. Designed for use with Sensidyne's piston pump they are easy to use. With 300 tubes to chose from, your application is almost guaranteed to be covered. Give us a call and well help you get the right detector tube for your air sampling needs.

Related Terms for gas sampling pumps

Need help finding the right suppliers?

Let the XPRTs do the work for you