gas sampling pumps Equipment in North Dakota

Serving North Dakota | Near North Dakota
91 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Environmental Sampling ×

  • Keyword: ×

  • Location: USA ×

  • Location: North Dakota ×

Apex Instruments - Model XC-563 - Source Sampling Console

by Apex Instruments, Inc.     based in Fuquay-Varina, NORTH CAROLINA (USA)

Apex Instruments Model 563 Source Sampling Console is the digital equivalet to the XC-522 and XC-572; featuring an AP25 Dry Gas Meter with optical encoder and digital totalizer. The console also features differential pressure tranducers for Delta P and Delta H. The temperature controllers, thermometer and timer all have digital displays. All ...

ProHydro - Snap Sampler - Passive Groundwater Sampling System

by ProHydro, Inc.     based in Fairport, NEW YORK (USA)

The Snap Sampler is a patented (US Pat. 7,178,415) groundwater sampling device that employs a unique double-end-opening bottle with “Snap” sealing end caps. This dedicated, in-well equipment is deployed at the desired position in the screen interval with up to six Snap Samplers and six individual sampling bottles. The design allows for ...

AGT - Model MAK 10-2 - Sample Gas Conditioning Systems

by AGT Thermotechnik GmbH & Co.KG     based in Erkelenz, GERMANY

MAKs are compressor coolers for highest demands of sample gas quality.  With optional components (pre-separator, filter, flowmeter, acid dosage, humidity sensor, sample gas pump) you can upgrade MAK sample gas coolers to complete integrated sample gas conditioning systems. The flexible, modular design ensures optimal compatibility to all ...

Crowcon - Single Point Sample System

by Crowcon Detection Instruments Ltd - a Halma company     based in Milton Park, UNITED KINGDOM

The single point system is designed to monitor gas samples from pipelines or processes. A powerful high-flow pump extracts and transports gas samples to the system where they are conditioned to remove dust and moisture. The conditioned sample gas is then passed across one and four gas sensors before being either exhausted to atmosphere or returned ...

Gasmet - Portable Sampling Unit

by Gasmet Technologies Oy     based in Helsinki, FINLAND

The portable sampling unit has been designed for portable emission monitoring measurements. The portable sampling unit is used for on-site measurements. It can be used for measuring trace concentrations of pollutants in wet, corrosive gas streams. The sample gas can be measured undiluted and without drying since the sample pump, heated filter and ...

OdoFlux - Sampling Chamber For Odours & Volatile Chemicals

by Odotech Inc.     based in Montreal, QUEBEC (CANADA)

Sampling chamber for odors & volatile chemicals from surface sources.

AGT - Model BCR 01 - Sample Gas Coolers

by AGT Thermotechnik GmbH & Co.KG     based in Erkelenz, GERMANY

BCRs are the allround talents among compressor coolers. They are installed in all applications where pure coolers are needed without additional conditioning equipment.  BCR sample gas coolers can be optionally equipped with PVDF-, glass- and/or stainless-steel-heat-exchangers. Thus BCR sample gas coolers can cool down nearly every gaseous ...

Crowcon - Multi Point Continuous Sample System

by Crowcon Detection Instruments Ltd - a Halma company     based in Milton Park, UNITED KINGDOM

The multi-point system uses the same sampling arrangement as the single point system, but can monitor up to 16 separate sample lines on a sequential basis. The multi-point system provides a cost effective and low maintenance solution for monitoring gas hazards in buildings, pumping stations, storage areas etc. Each sample line is monitored for one ...

AGT - Model MAK 10-1-TF1-EC1-FM1 - Sample Gas Conditioning Systems

by AGT Thermotechnik GmbH & Co.KG     based in Erkelenz, GERMANY

1 Gas path (PTFE/PVDF). 125 Nl/h per gas path. 1 condensate pump, 1 filter, 1 flowmeter. 1 Electronic control, 3-pole MAK-alarm-contact. Wall-mount housing, mobile version.

Model EPA Method 18 - Bag Sampler

by Keika Ventures, LLC (KV)     based in Chapel Hill, NORTH CAROLINA (USA)

This bag sampling method requires a Teflon or stainless steel pathway for integrated sampling into a Tedlar bag. The bag sampling systems we offer are manufactured by Environmental Supply, and are offered in 10, 15, 20 and 30 Liter sizes. The intrinsically safe vessel can be evaculated to 30' Hg vacuum prior to sampling and used in volatile areas ...

Need help finding the right suppliers?

Let the XPRTs do the work for you