low flow sampling Equipment in Ontario

269 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Environmental Sampling ×

  • Keyword: low flow sampling ×

  • Location: Canada ×

  • Location: Ontario ×


Hi-Q - MASS - Flow Controlled Continuous Duty Samplers

by HI-Q Environmental Products Company

HI-Q's Mobile Air Sampling Station can be supplied with controllable flow rates from as little as 2 SCCM up to, as high as 200 SLPM. The unit can be equipped as either a single or dual flow air sampling system - you make the call. Have an existing Stack Flow Rate Monitor? HI-Q's MASS Unit can easily be linked together with an existing stack-flow ...

HI-Q - LF-Series - Low Flow Continuous Duty Air Samplers

by HI-Q Environmental Products Company

With a continually increasing demand, HI-Q Environmental Products Company has developed a new line of low flow, low cost, manual flow control air sampling systems. HI-Q has configured this line of complete sampling systems with flow ranges from 5-CCM to 50-LPM. Each unit includes a shock mounted vacuum pump, lightweight carrying case with non-skid ...


DF-1 - Digital Flowmeter Low Volume Air Sampler (110V)

by F&J SPECIALTY PRODUCTS, INC.

The Model DF-1 portable air sampling system with a digital flowmeter is a low-volume air sampler consisting of an oil-less, carbon vane vacuum pump, with a constant air flow regulator for use where a nearly constant air flow is desirable. The regulator holds a constant pressure drop across an in-line orifice by varying the flow through a bypass ...

Felix IsoKenetic - Stack Train IST Sampler

by Felix Technology Inc.

IST Method 5 sampler systems are manufactured to conform with the construction design criteria and specifications cited in US EPA Method 5, Code of Federal Regulations (40CFR Part 60) and APTD-0581 Document. Our source sampler consoles allow operators to monitor gas velocities, temperatures, pressures and sample flow rates in order to maintain ...

MCZ - LVS16 - Low Volume Sampler

by Umwelttechnik MCZ GmbH

Microcomputer controlled gas collector for the automated dust sampling on membrane filters with a diameter of 47 mm or 50 mm in acc. with EN 12341. Automatic switching to sequentially admit up to 16 filters.

MCZ - LVS1 - Low Volume Sampler

by Umwelttechnik MCZ GmbH

Microcomputer controlled gas collector for the automated dust sampling on membrane filters with a diameter of 140 mm or 150 mm in acc. with EN 12341. Low volume sampler for dust, 1 channel, controlled with MicroPNS module, collects on 47/50 mm membrane filters.

Double Valve Pump - Model 408 - Pneumatic Groundwater Sampling Pump

by Solinst Canada Ltd.

Solinst Double Valve Pumps are gas drive pumps providing high quality, consistent samples, and excellent VOC sample results. Available in standard sizes of 5/8' and 1.66' diameters up to 2ft long, stainless steel or PVC, pumps are suitable for applications of almost any depth and diameter. Portable versions available and can be fitted with packers ...

Aysix - Portable Wastewater Samplers

by Aysix Technologies

Super – Compact and lightweight. 5 litre low profile composite Sample Container. Suitable for indoor and outdoor use. Mains or Battery powered (or both). Lockable Front Cover. 350+ samples achievable with a fully charged Aysix Battery. Front access to Sample Container without disturbing Sampler or Intake Hose. Open structure enables user to ...

HI-Q - Low Flow Oilless Rocking Piston Air Sampling System

by HI-Q Environmental Products Company

This Low Flow Air Sampling System has a flow range of 2-25 LPM. It consists of a 13 pound, 1/8 hp, Oilless Rocking Piston Pump, TMV needle control valve (for flow rate adjustment/measurement), brass interconnect piping, and 1/4' hose barb (Quick Disconnect Optional).

Micro Double Valve Pump - Model 408M - Narrow Diameter Flexible Groundwater Sampling Pump

by Solinst Canada Ltd.

The Micro Double Valve Pump has a remarkably small and flexible design. It is a pneumatic pump that uses coaxial Teflon tubing to give high quality samples. It is small enough to fit in 1/2' (13 mm) tubing and channels of the Solinst Model 403 CMT Systems, as its diameter is only 3/8' (10 mm). Ideal for low flow monitoring in narrow applications.

Need help finding the right suppliers?

Let the XPRTs do the work for you