particulate sampling Equipment in Iraq

47 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Environmental Sampling ×

  • Keyword: particulate sampling ×

  • Location: Asia & Middle East ×

  • Location: Iraq ×

Model PM162M - Automatic Sequential Particulate Sampler (TSP / PM10 / PM2.5 / PM1).

by Environnement S.A

Small size rack or mural instrument, designed to automatically sample particles on a filter using a TSP, PM10, PM2.5 or PM1 inletAvailable in 2 versions:• Standard size filter holder with 22 filters capacity• Very high capacity filter holder (max 70 filters) allowing up to 69 days of unattendeddaily sampling of particulate matter (wunique)-True ...

OPSIS - Model SM200 - Beta-Attenuation Particulate Monitor / Gravimetric Sampler

by Enviro Technology Services plc

The SM200 is an automatic particulate monitor for monitoring of PM10 and PM2.5. A filter is loaded into the filter magazine and a Geiger counter detects the beta attenuation before and after sampling. The response time of the instrument is 1–24 hours.

HI-Q - Stack Sampling System Design

by HI-Q Environmental Products Company

HI-Q is ready to help with your stack sampling requirements: State and Federal nuclear regulatory agencies require a stack discharge sampling program as part of the licensing process. Radionuclides discharged to the air in the form of particulate and volatile compounds must be assayed. Therefore, nuclear facilities are required to follow standard ...

Zefon - Escort LC Personal Air Sampling Pump

by Zefon International, Inc.

The Escort LC Air Sampling Pump can be used with a variety of personal and area sampling devices to collect such airborne contaminants as asbestos fibers, toxic gases, vapors, particulates, fumes and mists. It can also be used to sample silica dust, coal dust and organic vapors.

Partisol - Model 2000 - Air Sampler

by Petro-Instruments Corp, Ltd.

The Partisol Air Sampler was the first USEPA Federal Reference Method sampler to include an embedded microprocessor with internal data storage and bidirectional communication, active volumetric flow control, simple filter exchange, and quiet operation. It continues to offer features not found in any other USEPA-designated particulate matter (PM) ...

WaterMark Pressurized Disposable Bailer System

by Forestry Suppliers, Inc.

Rugged polyethylene construction permits use for both bailing and sampling wells while eliminating cross contamination and decontamination time. Threaded fitments on each end are attached using a special heat bonding process for a full circumferential seal. Each bailer includes a barbed hose adapter for attaching a pump to the bailer, an adapter ...

Zefon - Inhalable Dust Sampler

by Zefon International, Inc.

The Zefon Inhalable Dust sampler is a reusable filter cassette with a sampling head designed to measure the worker's exposure to inhalable particulates and respirable dust. When sampling at the recommended flow rate of 2 LPM, it collects a particle size distribution that includes particles of 100 micron and smaller. This meets the definition set ...

HI-Q - Model PM-10 - Sampling Inlet

by HI-Q Environmental Products Company

HI-Q Environmental Products Company's High Volume PM-10 Size Selective Inlet samples suspended particulate in the air at a flow rate of 40 CFM through its omnidirectional head. The air is then accelerated through multiple internal nozzles toward a greased collection plate. Due to their larger momentum, particles greater than 10 microns cannot ...

HI-Q - Model PM-2.5 - Sampling Inlet with Filter Holder

by HI-Q Environmental Products Company

HI-Q Environmental Products Company's, EPA Designed, PM-2.5 Sample inlet operates on the same principles of particulate impaction as the PM10-INLET described above. Air is drawn into the omnidirectional inlet head at a flow rate of 16.67 LPM. The air is then accelerated toward the first impaction stage where particulate with aerodynamic diameters ...

Need help finding the right suppliers?

Let the XPRTs do the work for you