Environmental Standards Equipment

1185 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Environmental Standards ×

5600 SERIIES Rechargeable Batteries

by High Sierra Electronics, Inc.     based in Grass Valley, CALIFORNIA (USA)

The 5600 Series of valve-regulated batteries set the standard for quality and excellence in rechargeable leadacid battery technology. These batteries feature a lead-lead dioxide system with a suspended dilute sulfuric acid electrolyte. Excessive pressurebuild up due to overcharging is avoided with special one-way valves that allow dry gas to ...

GA - Model Series 350-W - Air Cushioned Outside Lever & Weight Swing Check Valve

by GA Industries LLC     based in Cranberry Township, PENNSYLVANIA (USA)

The Figure 350 Air Cushioned Outside Lever & Weight Swing Check Valve is standard with ductile iron body and cover rated for 250 PSI (1,274 kPa) working pressure from 3” (DN80) to 30” (DN750) size, bronze body seat, stainless steel hinge shaft and rubber faced ductile iron disc for drop tight shutoff. A side-mounted totally ...

ROLL - AIR

by Rovero     based in Raamsdonksveer, NETHERLANDS

The Roll-Air greenhouse was developed by us and is in use all over the world. The revolutionary feature of this greenhouse is its fully opening roof. In a matter of seconds your crop can be indoors or outdoors, free of the effects of any shade. The Roll-Air greenhouse is an ideal solution because, in contrast to the standard Venlo cabriolet type ...

Dust / Dust Sampling System

by CleanAir Europe     based in La Penne-sur-Huveaune, FRANCE

This manual system can continuously sample dust from a gas duct under isokinetic conditions. This means that a representative sample of the flow in the chimney can be obtained at the sampling point. Particles are collected on heated filtration media.

HORIBA - Model MEXA-1400QL-NX - Exhaust Gas Analyzer

by DBG Dr Bluhm GmbH     based in Ratingen, GERMANY

Simultaneous Measurement of Four Nitrogen Compounds with High Accuracy - For Certification and R&D of advanced NOx after-treatment systems. The MEXA-1400QL-NX is an exhaust gas analyzer for four nitrogen compounds simultaneously,i.e. NO, NO2, N2O and NH3, utilizing mid-infrared Quantum Cascade Laser technology. By using the high power, high ...

HORIBA - Model MEXA-6000FT-E - Analytical Systems

by DBG Dr Bluhm GmbH     based in Ratingen, GERMANY

MEXA-6000FT series measures concentrations of multiple components utilizing the Fourier transform infrared (FTIR) method in combination with a multivariate analysis algorithm. It applies to various applications, such as evaluation of nitrogen components in catalyst development. The new MEXA-6000FT-E meets the NH3 testing requirements for the next ...

Model 800 Though 6000 CFM - Self-Contained Standard Precipitators

by Universal Air & Gas Products Corporation     based in Norfolk, VIRGINIA (USA)

Self-Contained Standard Precipitators - Model Series: Mi (with Integral Blower/Motor Assembly)- 800 Though 6000 CFM. Mi-series: This product range is self-contained, utilizing its own built in squirrel cage blower and motor assembly. Typically the units are free standing or suspended from the ceiling. Source capture applications use a pickup hose ...

ISO Guide 34 Inorganic Standards Certified Reference Materials

by Essex Scientific Laboratory Supplies Limited (ESSLAB)     based in Hadleigh, UNITED KINGDOM

Accredited Standards Certified Reference Materials (CRM) are of the very highest quality and are manufactured using ultra high purity acid and 18 megohm doubly deionized water that has been filtered through a 0.2 micron filter. They are suitable for use as calibration test or quality control materials for ICP-AES, OES and MS analysis and packaged ...

Clinical

by LGC Standards     based in Teddington, UNITED KINGDOM

LGC Standards offer products specifically targeted towards clinical diagnostics including higher order certified reference materials, which combine the highest level of metrological traceability with the lowest attainable measurement uncertainty. Aimed at IVD manufacturers and reference laboratories, these materials facilitate compliance with the ...

DeltaCal - Model DC1/DC100 - Calibrator for Federal Reference Method Samplers

by Keika Ventures, LLC (KV)     based in Chapel Hill, NORTH CAROLINA (USA)

BGI's DeltaCal is the first and only continuous volumetric flow calibration/audit device which gives a direct indication of volumetric flow rate, standard flow rate, barometric pressure (both mm/Hg & mb), ambient temperature and filter temperature in one instrument. It was developed for use with U.S. EPA PM2.5 designated samplers and their PM10 ...

Need help finding the right suppliers?

Let the XPRTs do the work for you