gas standards Equipment in Liechtenstein

Served | Office inNear
426 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Environmental Standards ×

  • Keyword: gas standards ×

  • Location: Europe ×

  • Location: Liechtenstein ×

COMBIMASS - Model GA-s - Gas Analyzer Station

by BINDER Flow GmbH     based in Ulm, GERMANY

Modern biogas fermentation plants cannot meet commercial and environmental requirements without appropriate measuring and analysis technique. For the economical operation of the fermentation plant it is likewise necessary to consider the gas composition and quantity of the individual digester stages. Therefore usually a biogas flow measurement is ...

Model 47933 - EPA 502/524 - Volatiles Organic Calibration Mix A (Without Gases)

by Sigma-Aldrich/Supelco     based in Bellefonte, PENNSYLVANIA (USA)

EPA 502/524 Volatiles Organic Calibration Mix A (without gases) 200 μg/mL each component in methanol, analytical standard.

Model ES 4100 - Gas Standards Generator

by LabHut Ltd     based in Gloucestershire, UNITED KINGDOM

A New Standard in Low Concentration Vapour Generation. The new ES4100 Vapour Standards Generator is an instrument designed to calibrate most types of gas analysers, including gas chromatographs, FTIR, GC-MS, Ion Mobility Spectrometers and also environmental chambers.

LaserGas - Model II - Standard Single Path Compact Monitor

by Neo Monitors AS     based in Skedsmokorset, NORWAY

Derived from the standard Single Path instrument, SP Compact Monitors are optimized for short distance measurement in the range 10 to 100 centimeters. The Monitors feature a focused laser beam, which enables the instrument to measure through very thin nozzles (< 10 mm diameter). For applications with continuous purge to prevent dust on the ...

Cal=Trak - Model SL-800 - Gas Mass Flow Standard

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

The Cal=Trak SL-800 offers a standardized accuracy of ±0.15% of reading, superior to all other commercial laboratory standards. The Model SL-800 is fast, primary, Mercury-free and easy-to-use. The dimensionally-based primary accuracy of the Cal=Trak surpasses pressure-based secondary methods and is backed by a rigorous uncertainty analysis. ...

Cal=Trak - Model XL Series - Gas Mass Flow Standard

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

Sierra’s Cal=Trak XL is the leading high flow primary standard calibrator in industry and offers a standardized accuracy of +/-0.25%. With increased demand for higher flows of process gas, there is a requirement for a way to validate and calibrate high flow gas meters and controllers. Like all members of Sierra’s Cal=Trak family of ...

MKAL - Calibration Modules

by Breitfuss Messtechnik GmbH (BFM)     based in Harpstedt, GERMANY

Microprocessor controlled modular calibration gas generator. Production of span gas by: Dilution, Permeation, Gas phase titration, Ozone generation by UV light. The modules can be controlled by contacts, TTL signals or RS232 interface using 'German Network' (B/H) protocol. For laboratory use, we recommend our comfortable Windows-software ...

Evaporator/Concentrator

by Glas-Col     based in Terre Haute, INDIANA (USA)

These systems have been updated with a flow meter attached to the side for controlling the gas flow to the equalizer manifold giving equal gas flow to each well. Each well has consistent evaporation. Needle height is easily adjustable to enable most sizes and capacities of microplates.

Entech Standards Preparation Software (ESP)

by Entech Instruments, Inc.     based in Simi Valley, CALIFORNIA (USA)

The Entech ESP Windows Software provides support in preparing standards using Dynamic or Static Dilution. Static dilution allows standards to be made from neat compounds using syringe transfer into gas dilution bottles. The ESP software performs the involved calculation necessary to make complex mixtures at ppm or ppb levels.

Model Series 1-1630 - Microflow Valves

by F.B.CONTROLS & TECHNOLOGIES     based in Roma, ITALY

The series 1-1630 microflow control valves are ideally suited for laboratory, pilot plants or process applications where close control of extremely small flow is a critical factor. Sizes: 15 and 20 mm; Connections : Gas or ANSI B2.1 Screwed or UNI-DIN-ANSI flanged; Ratings : ANSI 150 - 300 - 600 Lbs; Body Materials : Carbon steel, Monel, ...

Need help finding the right suppliers?

Let the XPRTs do the work for you