Environmental Standards Equipment in Cameroon

Serving Cameroon | Near Cameroon
683 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Environmental Standards ×

  • Location: Africa ×

  • Location: Cameroon ×

5600 SERIIES Rechargeable Batteries

by High Sierra Electronics, Inc.     based in Grass Valley, CALIFORNIA (USA)

The 5600 Series of valve-regulated batteries set the standard for quality and excellence in rechargeable leadacid battery technology. These batteries feature a lead-lead dioxide system with a suspended dilute sulfuric acid electrolyte. Excessive pressurebuild up due to overcharging is avoided with special one-way valves that allow dry gas to ...

GA - Model Series 350-W - Air Cushioned Outside Lever & Weight Swing Check Valve

by GA Industries LLC     based in Cranberry Township, PENNSYLVANIA (USA)

The Figure 350 Air Cushioned Outside Lever & Weight Swing Check Valve is standard with ductile iron body and cover rated for 250 PSI (1,274 kPa) working pressure from 3” (DN80) to 30” (DN750) size, bronze body seat, stainless steel hinge shaft and rubber faced ductile iron disc for drop tight shutoff. A side-mounted totally ...

Dust / Dust Sampling System

by CleanAir Europe     based in La Penne-sur-Huveaune, FRANCE

This manual system can continuously sample dust from a gas duct under isokinetic conditions. This means that a representative sample of the flow in the chimney can be obtained at the sampling point. Particles are collected on heated filtration media.

Clinical

by LGC Standards     based in Teddington, UNITED KINGDOM

LGC Standards offer products specifically targeted towards clinical diagnostics including higher order certified reference materials, which combine the highest level of metrological traceability with the lowest attainable measurement uncertainty. Aimed at IVD manufacturers and reference laboratories, these materials facilitate compliance with the ...

BioPROtect - Air Containment Unit Accommodates High-Throughput Robotic Systems

by The Baker Company     based in Sanford, MAINE (USA)

This Class II style walk-in clean air and containment enclosure is designed for high-volume robotic and automated equipment applications. The popularity of robotically assisted technologies has resulted in the continuing development of the BioPROtect Series of walk-in and reach-in biological safety enclosures. Through the innovative use of robotic ...

ATCC RapidCheck - Model 16404 /80 CFU - Aspergillus Niger

by R.T. Corp     based in Laramie, WYOMING (USA)

A quantitative certified reference material offering a specific bacterial dosage in a Vitroid format. Vitroids are readily soluble in aqueous solutions and do not require recovery incubations. 10 single use Vitroids packed 1 per vial. See the Certificate of Analysis for the exact dosage for each lot. This is a Class II (WHO) organism. ...

DeltaCal - Model DC1/DC100 - Calibrator for Federal Reference Method Samplers

by Keika Ventures, LLC (KV)     based in Chapel Hill, NORTH CAROLINA (USA)

BGI's DeltaCal is the first and only continuous volumetric flow calibration/audit device which gives a direct indication of volumetric flow rate, standard flow rate, barometric pressure (both mm/Hg & mb), ambient temperature and filter temperature in one instrument. It was developed for use with U.S. EPA PM2.5 designated samplers and their PM10 ...

Model 48414 - Formaldehyde Oxazolidine Solution

by Sigma-Aldrich/Supelco     based in Bellefonte, PENNSYLVANIA (USA)

Formaldehyde Oxazolidine solution 2000 µg/mL in toluene, ampule of 1 mL.

Model 48891 - Ethylene Oxide Solution

by Sigma-Aldrich/Supelco     based in Bellefonte, PENNSYLVANIA (USA)

Ethylene oxide solution 50 mg/mL in methylene chloride, ampule of 1 mL.

Model 48838 - Ethylene Oxide Solution

by Sigma-Aldrich/Supelco     based in Bellefonte, PENNSYLVANIA (USA)

Ethylene oxide solution 50 mg/mL in methanol, ampule of 1 mL.

Need help finding the right suppliers?

Let the XPRTs do the work for you