EPA Methods Equipment in San Marino

Served | Office inNear
90 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: EPA Methods ×

  • Location: Europe ×

  • Location: San Marino ×

Westech - Model PM10 - High Volume Sampler

by Westech Scientific Instruments (Westech)     based in Upper Stondon, UNITED KINGDOM

Mass Flow Controlled PM10 System. Includes size selective inlet (10 micron cut size), anodized aluminium shelter, 8' x 10' stainless steel filter holder with probe hole, blower motor assembly, continuous flow/pressure recorder, combination mass flow controller w/20-60 SCFM air flow probe, time indicator, 30' water manometer, filter media ...

GS-Tek - Model GsBP-624 - GC Columns

by General Separation Technologies, Inc. (GS-Tek)     based in Newark, DELAWARE (USA)

Solvent rinse-able and highest temperature limit. Exceptionally low column bleed, inert and neutral surface, and consistent column selectivity. Wide range of column dimensions and stationary phase film thicknesses for Purge/trap GC, GC/ECD and GC/MS. Mid-polar. Great columns for EPA methods, Pharmaceutical QC, Petrochemicals, Petroleum, Vocs, ...

Tekran - Model 2600-IVS - Automated Sample Analysis System

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Series 2600 system allows the analysis of ultra-trace levels of total mercury in laboratory prepared environmental samples (water, biota, soil, sediments, gas cartridges, effluents and more). It offers unparalleled sensitivity and flexibility for those who require truly sensitive total mercury analysis.

Tekran - Model 2600-NG - Mercury Analyzer For Natural Gas and Industrial Hygiene

by Tekran Instruments Corporation     based in Knoxville, TENNESSEE (USA)

The Tekran Model 2600-NG Mercury Analyzer is designed for the analysis of gas phase sample cartridges. The system contains an atomic fluorescence detector, a dual stage thermal desorber and a data acquisition & control system. A single serial connection allows a Windows based PC to control the entire analysis process, acquire the detector ...

Intake Systems - 316(b) Compliance with Cook Legacy Intake Systems

by Cook Legacy Coating Company     based in Canal Winchester, GEORGIA (US) (USA)

Cook Legacy has the knowledge and technology to help plants comply with the EPA 316(b) rule. Cook Legacy works on site design, wedge wire intake screens, and custom designed intake systems.

Automatic extraction systems SOXTHERM

by C. Gerhardt GmbH & Co.     based in Königswinter, GERMANY

SOXTHERM rapid extraction systems can be used in nearly every analytical area. The fully automated extraction process is patented and especially useful for residue analisis and the determination of fat in food and feed samples (solid-liquid extractions according to Soxhlet and Twisselmann). The SOXTHERM principle simplifies and accelerates the ...

Torch - Model TOC/TN - Combustion Analyzer

by Teledyne Tekmar     based in Mason, OHIO (USA)

Tekmar’s newest addition to the TOC analyzer product line, the Torch, utilizes a patent pending Static Pressure Concentration (SPC) for the analysis of TOC/TN using high temperature combustion.

Sitelab - Model EDRO Calibration Kit - Product No. CAL-042

by Sitelab Corporation     based in West Newbury, MASSACHUSETTS (USA)

Use with Sitelab's UVF-3100 analyzer. Kit contains ready-to-use calibration standards for testing hydrocarbons in the C10 to C36 extended diesel and oil range. Results will directly correlate to U.S. EPA Method 8015-DRO or other laboratory methods using GC instrumentation. Kits are re-usable for 3 months. Available in methanol or hexane solvent. ...

Sitelab - Model GRO Calibration Kit - Product No. CAL-025

by Sitelab Corporation     based in West Newbury, MASSACHUSETTS (USA)

Use with Sitelab's UVF-3100 analyzer. Kit contains ready-to-use calibration standards for testing volatile petroleum hydrocarbons, including BTEX, in the C6 to C10 gasoline range.Results will directly correlate to U.S. EPA Method 8015-GRO or other laboratory methods using GC instrumentation.Kits are re-usable for 3 months. Available in methanol or ...

TCLP-EF 1000mL

by High-Purity Standards     based in Charleston, SOUTH CAROLINA (USA)

By diluting one (1) liter of the concentrate solution to 50 L (50 fold dilution) with 18 megaohm water, the desired No. 1 extraction fluid is attained as required by EPA. If the analyst needs only a small quantity, a single 200 mL bottle may be diluted to 10 L with 18 megaohm water. May be used in Toxicity Characteristic Learching Procedure ...

Need help finding the right suppliers?

Let the XPRTs do the work for you