Flow Monitoring Equipment in St. Vincent & The Grenadines

Serving St. Vincent & The Grenadines | Near St. Vincent & The Grenadines
1582 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Flow Monitoring ×

  • Location: Latin America ×

  • Location: St. Vincent & The Grenadines ×

Dwyer - Model Series P4 - PPS Piston Flow Switch

by Dwyer Instruments Inc     based in Michigan City, INDIANA (USA)

The Series P4 PPS Flow Switch features a molded plastic construction for enhanced performance. Monitor liquids with fixed set points from 0.1 to 1.5 GPM. Choose normally open or normally closed SPST or SPDT hermetically sealed reed switch technology. The industrial switch features PPS (polyphenylene sulfide) R4 housing and piston, 316SS spring, ...

Sitron - Model CF 420 - Flow Transmitter

by Sitron Usa Inc.     based in Hauppauge, NEW YORK (USA)

The CF420 is a Flow Transmitter that measures the velocity of liquid flows. The CF420 provides two output options; a 4-20mA output and a PNP switch output. The electronics module converts the signal from the probe to a 4…20mA analog output, which can be used to indicate flow rate. For the PNP output, the measured flow rate is compared to ...

Ultraflux - Model UF 801-P - Ultrasonic Portable Flowmeter

by Ultraflux     based in Le Technoparc, FRANCE

The most advanced portable ultrasonic flowmeter is available. Incorporationg over 30 years of field experience, the UF 801-P is the ideal portable flowmeter for your diagnosis and monitoring requirements. Featuring long battery life and clamp-on probe technology using the measurement principle (Transit Time ultrasonic) which has been ...

GPE - Model F5001 - Electromagnetic Flowmeters

by Golden Promise Equipment (GPE) Inc.     based in New York, NEW YORK (USA)

The principle of F5001 Electromagnetic flowmeter is based on Faraday's law of electromagnetic induction, according to which the sensor converts the flow into an electrical voltage proportional to the velocity of the flow. The processed signal will be multiplied by the pipe cross-sectional area and resulted in flow volume.

GPE - Model F8000 - Variable-Area Flowmeter

by Golden Promise Equipment (GPE) Inc.     based in New York, NEW YORK (USA)

Flow Range: Water 2.5 to 100000L/h Air 0.07 to 400 m3/h. Turndown Ratio: Size≤100mm:10:1 Size>100mm:5:1. Accuracy: Standard Version : ±2.5%FS .Special Order: can be up to ±1.5%FS. Maximum Working Pressure: Size 15/25/40/50:4.OMPa Size 80/100/150:1.6MPa. Working Temperature: Normal Version h1:-40ºC to 100ºC ...

Model A - Variable Area Flow Meter

by Kytola Instruments Oy     based in Muurame, FINLAND

Variable area flow meter Model A is a high quality acrylic flow meter. It is a reliable and easy to read instrument for measuring and monitoring liquid and gas flows. Typical applications are water treatment, sealing water measurements and gas flow measurements.

Spirax Sarco - Model MTI10 & MTL10 - Thermal Mass Flowmeters

by EMCO Flow Systems / EMCO - Engineering Measurements Company     based in Blythewood, SOUTH CAROLINA (USA)

The MTI10 Insertion and MTL10 Inline Thermal Mass Flowmeters measure clean, dry gas and air applications over a wide range of flows.

A.YITE - Model EU-109 - Portable Handle Ultrasonic Flowmeter

by A.YITE Technology     based in Shanghai, CHINA

The EU-109H Ultrasonic Flow Meter is a portable instrument which could be taken to the field and could measure the fluid flow moveably, and now widely applied in some non-contact measurement with corrosive, clean or ordinary fluid fields of the petrochemical, food and water industry.

Model FlowShark Pulse - Open Channels Flow Monitor

by ADS Environmental Services / ADS LLC     based in Huntsville, ALABAMA (USA)

The new FlowShark® Pulse for Open Channels from ADS® is a high performance liquid flow monitor for use in open channels of virtually any shape. It is designed for high accuracy and reliability, utilizing the most advanced velocity measurement technology available – gated cross correlation with digital pattern detection. Ease-of-use ...

Model 502500 - Flowmeter

by Knauer-Wissenschaftliche Gerätebau     based in Berlin, GERMANY

The Flowmeter model 502500 is specifically designed for monitoring of the flow rate in chromatography systems. It periodically displays the current flow rate on a large LC display and simultaneously records the measured value to a RS-232 controller. This enables PC supported data processing. It operates with a one point calibration. 115 Volt ...

Need help finding the right suppliers?

Let the XPRTs do the work for you