gas flow Equipment in United Kingdom

461 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Gas Detection ×

  • Keyword: gas flow ×

  • Location: Europe ×

  • Location: United Kingdom ×

Bioprocess - Model uFlow - Low Gas Flow Measurements

by Bioprocess Control AB

The µFlow is a compact and elegant instrument for measuring ultra-low gas flows with high precision. The µFlow has been designed for the on-line, real-time monitoring of all inert and slightly aggressive gases, over a wide detection range and for most indoor laboratory scale applications. Suitable applications include biogas process studies, ...


Slot-Flow Air-Assist Flares (SFVP)

by AEREON

Slot Flow Air Assisted flares are comprised of two concentric risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to combine with the process gas, which passes through it's own secondary riser. Upon mixing, the high-pressure air flow causes turbulence in the waste ...

Model VCEM5100 - Flue Gas Flow Monitor

by Codel International Ltd

Continuous on-line analysis often only considers the density of the emissions (e.g mg/Nm3) In order to obtain a measurement of total emissions for pollution monitoring (e.g kg/hr) it is necessary to either calculate or measure flow within the gas stream. The VCEM5100 provides non-contact measurement of gas velocity using a time-delay correlation ...

Model VCEM5000 - Flue Gas Flow Monitor

by Codel International Ltd

Continuous emission monitoring often only considers the density of the emissions (e.g mg/Nm3) In order to obtain a measurement of total emissions for pollution monitoring (e.g kg/hr) it is necessary to either calculate or measure flow within the gas stream. The VCEM5000 provides non-contact measurement of gas velocity using a time-delay ...

Cal=Trak - Model SL-500 - Gas Mass Flow Meter

by Sierra Instruments, Inc.

You’ll get high-precision, cost-effective calibration with our CalTrak™ SL-500 primary standard gas flow calibrator, the first in our CalTrak line of dependable mass gas flow calibration devices. Fast, primary, and portable, the SL-500 offers a standardized accuracy of ±0.35%, making it an easy-to-use, low-maintenance way to ...

Cal=Trak - Model XL Series - Gas Mass Flow Standard

by Sierra Instruments, Inc.

Sierra’s Cal=Trak XL is the leading high flow primary standard calibrator in industry and offers a standardized accuracy of +/-0.25%. With increased demand for higher flows of process gas, there is a requirement for a way to validate and calibrate high flow gas meters and controllers. Like all members of Sierra’s Cal=Trak family of ...

Cal=Trak - Model SL-800 - Gas Mass Flow Standard

by Sierra Instruments, Inc.

The Cal=Trak SL-800 offers a standardized accuracy of ±0.15% of reading, superior to all other commercial laboratory standards. The Model SL-800 is fast, primary, Mercury-free and easy-to-use. The dimensionally-based primary accuracy of the Cal=Trak surpasses pressure-based secondary methods and is backed by a rigorous uncertainty analysis. ...

Innova-Switch - Flow Switch for Gases & Liquids

by Sierra Instruments, Inc.

Switches on a flow/no flow condition in both gases and liquids. Flow Switch range of 0.01 to 5 sfps (.003 to 1.524 smps) in liquids and 0.1 to 500 sfps (.03 to 152.4 smps) gases. Response Time of 0.5 to 10 seconds (media dependent) Wide operating temperature range of -100F to +390F (-70C to 200C) CE, CENELEC and CSA approvals.

Side-Trak - Model 840 - Analog Gas Mass Flow Controller

by Sierra Instruments, Inc.

Get accurate, reliable mass flow control with Sierra’s SideTrak® Model 840 analog mass flow meter and controller. With precise primary standard calibration to measure any clean, dry gas under with low pressure drop – including oxygen, mixtures, toxics, corrosives and combustibles – the SideTrak flow meter has proven ...

Gas Flow Measurement for Biogas

by bwe biogas-weser-ems GmbH & Co. KG

For privileged biogas plants there is a limitation on the biogas production of 2.3 Mio Nm³/a. In order to control this limit, approval authorities request evidence with appropriate measure techniques.

Need help finding the right suppliers?

Let the XPRTs do the work for you