Level Monitoring Equipment in West Virginia

375 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Level Monitoring ×

  • Location: USA ×

  • Location: West Virginia ×

Vibrating Level Switches

by Hycontrol Limited

Switches for Solids ApplicationsThe design of a vibrating level switch for solids must be fundamentally different to the design described for liquids. If two large parallel blades were used on powders or solids it would be too easy for product to build-up and become lodged between the blades causing the oscillations of the switch to stop ...

Model LS-1000-BB - Single Level Float Switch

by FPI Sensors

Part Number: LS-1000-BB, Stem Material: Brass, Float Material: Buna, Maximum Temperature (F): 180F, PSI @ 70 Degrees F: 150 PSI, Minimum Liquid Specific Gravity: .45, Switch Max Wattage Rating at 250V: 50 Watt, Leads: 24' PFTE.

Model FC/FD - Mini Float Level Switch

by FineTek Co., Ltd.

When the magnetic field of permanent magnet inside the float is moved into to the proximity of the reed switch inside the stationary stem, the reed switch 'snaps' the contact together and closes the electrical circuit. When the magnetic field is moved away from the reed switch, the reed switch does not touch. The circuit is open.

Acu-Trac - Model NEMA4 - Ultrasonic Liquid Level Sensors

by SSI Technologies Inc. - Controls Division

Acu-Trac® NEMA4 Ultrasonic Liquid Level Sensors are non-contact sensors that are a direct replacement for level senders on tanks with depths up ≤ 1.5 meters (59 inches). The NEMA4 ultrasonic liquid level sensors offer a choice of outputs (analog current loop, ratiometric voltage or non-ratiometric voltage). The NEMA's RS-485 bus ...

InnovaSwitch - Level Switch for Liquids

by Sierra Instruments, Inc.

Indicates liquid level in tanks and process vessels. Switches on level change of 0.03 inch (.08 cm) (dry to wet and wet to dry) Response Time: 0.1 to 1 second (media dependent). Wide operating temperature range of -100F to +390F (-70C to 200C). CE, CENELEC and CSA approvals.

Ultrasonic Single Mode Drum Gauge

by BASCO

 This gauge may be powered by alkaline or lithium 9V batteries (2) not included. Screw into the 3/4" or 2" opening (supplied with 3/4" bung adapter). Gauge accuracy is +/- 0.5 gallon. The monitor settings may be easily switched with the press of a button to calibrate the liquid level in a vertical 15, 30 or 55 gallon or 57, 114 ...

Ultrasonic Tri-Mode Drum Gauge

by BASCO

 When powered by a 24V external power supply, the gauge will monitor fluid levels continuously. The 4-20mA output can be interfaced to external controllers and test equipment. Gauge accuracy is +/- 0.5 gallon (supplied with 3/4" bung adapter). The monitor settings may be easily switched with the press of a button to calibrate the liquid ...

InfraSpec - Model EB - ppm Level Biodiesel Detection

by Wilks - A Spectro Scientific Company

The InfraSpec Biodiesel Detection Spectrometer, Model EB, with a flow-through sample system and automated syringe pump, detects biodiesel in diesel fuel down to 100 ppm in under 5 minutes at a cost less than other analytical instruments. It provides an easy, on-site check for users wanting to detect ppm levels of biodiesel in diesel such as ...

Need help finding the right suppliers?

Let the XPRTs do the work for you