mercury sampling traps Equipment in Idaho

Serving Idaho | Near Idaho
14 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Mercury Monitoring ×

  • Keyword: ×

  • Location: USA ×

  • Location: Idaho ×

Model HGPA-8-HS - 8 Foot Air Cooled Mercury Probe

by Apex Instruments, Inc.     based in Fuquay-Varina, NORTH CAROLINA (USA)

Reliable and Easy To Use With Quick Set-Up Time. Cement MACT Compliant. 8 Foot Stainless Steel Dual Sorbent Trap Hg Probe, Air Cooled, Single Heater; 2' Tube Sheath; Two 10mm Fittings; Type K Stack, Trap & Probe Thermocouples; 1/2' Sample Lines; Insulated Junction Enclosure; 1000W/120V (blower sold separately).

Mercury Sorbent Traps

by Apex Instruments, Inc.     based in Fuquay-Varina, NORTH CAROLINA (USA)

PS 12B specifies sampling, and analytical, and quality-assurance criteria and procedures for the performance-based monitoring of vapor-phase mercury (Hg) emissions in combustion flue gas streams, using a sorbent trap monitoring system. The principle employed is continuous sampling using in-stack sorbent media coupled with analysis of the ...

Model HG-400 - Mercury Analyzer

by JM Science Inc     based in Grand Island, NEW YORK (USA)

The HG-400/450 is a low cost mercury analyzer that has been especially designed for environmental analyses in the budget-conscious small and medium size laboratory. This analyzer is based on cold vapor atomic absorption spectroscopy (CVAAS) using the principals of reduced vaporization. As such, it does not require any compressed gases and offers ...

Ohio Lumex - Model 30B - Unspiked Sorbent Traps for Total Mercury Testing

by Ohio Lumex Co., Inc.     based in Twinsburg, OHIO (USA)

Method 30B Sorbent Traps are available for evaluations and RATA. These 6mm or 10mm extra durable 2-section sorbent traps are typically used from a few hours to one day sampling and can be used when pulling up to 2 liters per minute flow. Method 30B is a procedure for measuring total vapor phase mercury (Hg) emissions from coal-fired combustion ...

Ohio Lumex - Model 30B - Vapor-Spiked Sorbent Traps for Total Mercury Testing

by Ohio Lumex Co., Inc.     based in Twinsburg, OHIO (USA)

Method 30B Sorbent Traps at a variety of spike levels are available for evaluations and RATA. These 10mm extra durable 2-section sorbent traps are typically used from a few hours to one day sampling and can be used when pulling up to 2 liters per minute flow. Custom spiking at any value you need is available.

Ohio Lumex - Model RP-M324 - Sorbent Trap Mercury Analyzer

by Ohio Lumex Co., Inc.     based in Twinsburg, OHIO (USA)

The RP-M324 attachment is designed to be part of a mercury analytical system (RA-915+ or RA-915M mercury analyzer) which altogether makes up the Sorbent Trap Mercury Analyzer. Thousands of RATA’s all over the USA and Canada have been completed using this system. Using a sample probe that will be inserted into the emission stack and a ...

Appendix - Model PS 12B/Appendix K RATA - Vapor-Spiked Sorbent Traps for Total Mercury Testing

by Ohio Lumex Co., Inc.     based in Twinsburg, OHIO (USA)

Appendix K/PS 12 B RATA Sorbent Traps at a variety of spike levels are available for evaluations and RATA. When performing a RATA on an Appendix K/PS 12 B System, these are the traps used in the Appendix K/PS 12 B System and are specially made to match the Method 30B traps perfectly. These 10mm extra durable 3 section sorbent traps are typically ...

Ohio Lumex - Model PS 12B/Appendix K - Long Term Testing Unspiked Sorbent Traps for Mercury Monitoring

by Ohio Lumex Co., Inc.     based in Twinsburg, OHIO (USA)

PS 12B/Appendix K Long Term Testing Unspiked Sorbent Traps are available for research purposes and to perform baseline evaluations. These 10mm extra durable 2 or 3 section sorbent traps are typically used from a 1-7+ day sampling and can be used when pulling up to 1 liter per minute flow. Most customers will order these first to determine their ...

Ohio Lumex - Model PS 12B/Appendix K - Long Term Testing Spiked Sorbent Traps for Mercury Monitoring

by Ohio Lumex Co., Inc.     based in Twinsburg, OHIO (USA)

PS 12B/Appendix K Long Term Testing Spiked Sorbent Traps at a variety of spike levels are available for Long Term and Continuous testing. These 10mm extra durable 3 section sorbent traps are typically used from a 1-7+ day sampling and can be used when pulling up to 1 liter per minute flow. They are all custom spiked for extra spike retention at ...

Model XC-260 - Manual Mercury Sampling Console

by Apex Instruments, Inc.     based in Fuquay-Varina, NORTH CAROLINA (USA)

The XC-260 Hg Source Sampler is designed for performance testing, base line studies, and profiling.  This low-cost, portable, and field-proven audit system is easy to learn and use, and is ideal for sampling mercury emissions based on Reference Method 30B of the U.S. EPA Appendix K, 40 CFR, Part 60. The XC-260 Hg Audit System is used for ...

Need help finding the right suppliers?

Let the XPRTs do the work for you