meteorological instruments
Category: Monitoring & Testing ×
Subcategory: Meteorological Monitoring ×
Keyword: meteorological instruments ×
Location: Africa ×
Location: Algeria ×
Select the suppliers you wish to contact using the checkboxes.
The wind speed sensor FT4000 series are used for transmission of electrically measured wind speed. This wind sensor is designed for automatic weather stations which can be used in a wide range of locations such as airports, research vessels, and industrial sites. The availability of simultaneous outputs makes the wind sensor suitable for a wide ...
Barometric Pressure Sensors convert absolute atmospheric pressure into a linear, proportional voltage, which may be used in any meteorological system.
Temperature sensor FT2030 series are equipped with platinum resistance thermometers Pt100, DIN 60751 B, tolerance class1/3 DIN, with 4-wire connection and 5m cable. The sensor is placed in plastic shaft and screwed into the base plate by means of a cable duct. The base plate is for senor mounting using two M8-screws, 30 mm apart. The radiation ...
The pyranometer is an instrument for measuring the solar irradiance. The thermopile sensor construction measures the solar energy that is received from the total solar spectrum and the whole hemisphere (180 degrees field of view). The output is expressed in Watts per meter square. The pyranometer is designed for continuous indoor and outdoor use.
Sunshine duration is defined by WMO as the time during which the direct solar radiation exceeds the level of 120 W/m². It has no moving parts and uses 3 photo-diodes with specially designed diffusers to make an analogue calculation of when it is sunny. The output is switched high or low to indicate sunny or not sunny conditions. The ...
Precipitation gauge is a high-grade gauge with a collecting area of 500 cm². It also has advanced heating system for operation at extreme areas.
Visibility sensor is configured for accurate measurement of visibility in the densest of fogs to very clear air conditions and is the refinement of 2 decades of experience and technology resulting in a compact, robust instrument with excellent performance.
A fact is that evaporation rate is extremely sensitive. The Pan is manufactured from painted GI sheet tested for water leak. The stilling well and thermometer clamps are manufactured from Brass. This is supported on wooden platform and covered with reinforced chickon, Measuring Jar is manufactured from transparent Acrylic also available is bran. ...
The SMART2000 Telemetry System is a Hi-Tec acquisition, logging, and control system based on ARM microprocessor. Due to its design architecture, it can serve all the environmental applications including meteorology, hydrology, and water and air quality. The Felix Technology RTU has 8 isolated differential analogue inputs, enabling data acquisition ...
The SL300 ultrasonic snow depth sensor provides a total system in a compact package, containing an ultra sensitive electrostatic transducer and the supporting circuitry to provide a 0 to +5 or 0 to +2.5 VDC output with fully independent zero and span adjustments over the entire operating range of detection from 1.5’ - 20’. The ...
