meteorological instruments Equipment in Denmark

Serving Denmark | Office in DenmarkNear Denmark
112 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Meteorological Monitoring ×

  • Keyword: meteorological instruments ×

  • Location: Europe ×

  • Location: Denmark ×

Meteorological instruments: rain gauges

by Eijkelkamp Agrisearch Equipment     based in Giesbeek, NETHERLANDS

Rain gauges are used to determine the precipitation at a certain point which is representative for a certain area.


Felix - Solar Farm Weather Monitoring Station

by Felix Technology Inc.     based in Concord, ONTARIO (CANADA)

A Solar Farm Weather Monitoring Station is a meteorological station at which common meteorological sensors are mounted on a tripod or lattice or mono-pole mast. The meteorological data are then stored in a data logger and can be transmitted to a remote server automatically. This configuration is used to increase the number and also reliability of ...

Meteorological Instruments (Mechanical)

by Pawan Exports     based in Kasarwadi, INDIA

Fibre Reinforced Plastic (FRP) Non Recording Rain Gauge ( One Measuring Borosilicate Cylinder included). Wind Vane – Mechanical Type. Anemometer – Mechanical Counter Type. Portable Mechanical Wind Vane. Self Recording Rain Gauge. Tipping Bucket Rain Gauge. Sunshine Recorder (with Recording Card). Pan Evaporimeter (Copper or Galvanized ...

Felix - Model FT4000 - Wind Sensor (Anemometer) Used for Transmission of Electrically Measured Wind Speed

by Felix Technology Inc.     based in Concord, ONTARIO (CANADA)

The wind speed sensor FT4000 series are used for transmission of electrically measured wind speed. This wind sensor is designed for automatic weather stations which can be used in a wide range of locations such as airports, research vessels, and industrial sites. The availability of simultaneous outputs makes the wind sensor suitable for a wide ...

Felix - Model FT2030 Series - Air Temperature Sensor in Radiation Shield

by Felix Technology Inc.     based in Concord, ONTARIO (CANADA)

Temperature sensor FT2030 series are equipped with platinum resistance thermometers Pt100, DIN 60751 B, tolerance class1/3 DIN, with 4-wire connection and 5m cable. The sensor is placed in plastic shaft and screwed into the base plate by means of a cable duct. The base plate is for senor mounting using two M8-screws, 30 mm apart. The radiation ...

Felix - Sunshine Duration Sensor

by Felix Technology Inc.     based in Concord, ONTARIO (CANADA)

Sunshine duration is defined by WMO as the time during which the direct solar radiation exceeds the level of 120 W/m². It has no moving parts and uses 3 photo-diodes with specially designed diffusers to make an analogue calculation of when it is sunny. The output is switched high or low to indicate sunny or not sunny conditions. The ...

Felix - Pyranometer Instrument for Measuring the Solar Irradiance

by Felix Technology Inc.     based in Concord, ONTARIO (CANADA)

The pyranometer is an instrument for measuring the solar irradiance. The thermopile sensor construction measures the solar energy that is received from the total solar spectrum and the whole hemisphere (180 degrees field of view). The output is expressed in Watts per meter square. The pyranometer is designed for continuous indoor and outdoor use.

Felix - Barometric Pressure Sensors

by Felix Technology Inc.     based in Concord, ONTARIO (CANADA)

Barometric Pressure Sensors convert absolute atmospheric pressure into a linear, proportional voltage, which may be used in any meteorological system.

Felix - Model SMART2000 - Telemetry System for Hi-Tec Acquisition, Logging and Control

by Felix Technology Inc.     based in Concord, ONTARIO (CANADA)

The SMART2000 Telemetry System is a Hi-Tec acquisition, logging, and control system based on ARM microprocessor. Due to its design architecture, it can serve all the environmental applications including meteorology, hydrology, and water and air quality. The Felix Technology RTU has 8 isolated differential analogue inputs, enabling data acquisition ...

Felix - Evaporizometer for Automatic Weather Station

by Felix Technology Inc.     based in Concord, ONTARIO (CANADA)

A fact is that evaporation rate is extremely sensitive. The Pan is manufactured from painted GI sheet tested for water leak. The stilling well and thermometer clamps are manufactured from Brass. This is supported on wooden platform and covered with reinforced chickon, Measuring Jar is manufactured from transparent Acrylic also available is bran. ...

Need help finding the right suppliers?

Let the XPRTs do the work for you