Open Path Gas Monitoring Equipment in Kiribati

72 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Open Path Gas Monitoring ×

  • Location: Australasia ×

  • Location: Kiribati ×


Cerex - UV Sentry - Open-Path Air-Monitoring System

by Cerex Monitoring Solutions, LLC.

The Cerex UV Sentry is a two-part, open-path air-monitoring system that uses ultraviolet light to analyze the air for hazardous pollution and airborne toxins. Easy to use and portable, the UV Sentry can continuously monitor path-lengths up to 1000 meters. The UV Sentry offers real-time detections of compounds ranging in concentrations from the ...

LaserGas - II - Open Path (OP) Monitor for High Performance Gas Analyser

by Neo Monitors AS

NEO Monitors LaserGas II Open Path (OP) Monitor is s a compact, high performance gas analyser for long distance monitoring in ambient air. Measurement lengths of up to 1000 m one way are possible. The OP Monitor utilizes a transmitter / reflector configuration to measure the average gas concentration along the optical line-of-sight. As option a ...

LaserGas - III HF - Open Path (OP) Gas Monitor

by Neo Monitors AS

NEO Monitors new HF Open Path Gas monitor specifically designed for service in hazardous areas. Based on our third generation LaserGas Technology, the entire instrument is build into compact flameproof enclosures making it fit for zone 1 and division 1 applications. The LaserGas III HF OP consists of a transmitter and receiver unit that are ...

PKL Technologies - Spectra-1 - Portable Lightweight Open Path TDLAS Gas Monitor

by PKL Technologies Inc.

Spectra-1, a portable lightweight open path TDLAS gas monitor uses proprietary hardware and software to provide a low cost open path gas sensing instrument. The enclosure for Spectra-1 was selected for its resistance to extreme shock and vibration. Spectra-1 can be used for portable as well as fixed site installations. RS232 serial communications ...

PKL Technologies - Spectra-1 - Extractive Gas Monitor

by PKL Technologies Inc.

Spectra-1 Extractive gas monitor features the same gas analysis software as used by the open path Spectra-1 monitor. Tuneable Diode Laser Absorption Spectroscopy (TDLAS) based gas sensing. Closed path internal multi-pass sampling cells are used instead of an open path configuration to calculate gas concentrations. 19′ rack mounted design. ...

Boreal Laser - GasFinderFC - Portable In-Situ Monitor

by Boreal Laser Inc.

GasFinderFC is a portable laser based gas detector that incorporates a fiber optic port to allow various measurement heads to be attached and swapped out. These heads can enable stack monitoring, short and long open path monitoring or local point measurements. Delivering a very flexible analyzer that can bring the advantages of laser based gas ...

Boreal Laser - GasFinder2 - Open Path Gas Monitor

by Boreal Laser Inc.

GasFinder2 is a portable, battery-powered open path gas monitor providing one second response and broad dynamic range. Permanently calibrated, GasFinder2 is a small and light (less than 5kg) hand held solution. GasFinder2 response does not depend on path length, so a series of paths of different lengths (between 1m and 1000m) can be measured in ...

Cerex - Sentry-MS - Open-Path UVDOAS Multi-Gas Analyzer

by Cerex Monitoring Solutions, LLC.

The Cerex Sentry-MS is a mono-static, open-path multi-gas analyzer that offers exceptional cost effectiveness for monitoring highly scrutinized gases. It is capable of resolving very low concentrations of individual gas species such as Benzene, Chlorine, Mercury, Ammonia and many more...As a direct replacement for maintenance intensive sensor and ...

AirSentry FTIR - Open-Path Air-Monitoring System

by Cerex Monitoring Solutions, LLC.

Offering real time, regulatory compliant quantification of hundreds of compounds, the Cerex AirSentry FTIR provides a cost effective multi-component air monitoring solution. It is capable of detection of individual gases such as HF, Phosgene, SiF4, SF6, DCE, TCE...and many more. Monitoring as few as two gases with the AirSentry FTIR results in ...

Land - Series 9000 - Cross Stack, In-Situ Carbon Monoxide Monitor

by Land Instruments International

Series 9000 cross stack infrared, in-situ carbon monoxide monitors provide high accuracy and reliability, coupled with straightforward installation and setup and is suitable for a wide range of industrial combustion efficiency monitoring applications. This carbon monoxide monitor is designed to provide the operator with a fast response ...

Need help finding the right suppliers?

Let the XPRTs do the work for you