Ozone Monitoring Equipment in Angola

Serving Angola | Near Angola
145 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Ozone Monitoring ×

  • Location: Africa ×

  • Location: Angola ×

Model 306 Series - Ozone Calibration Source

by 2B Technologies     based in Boulder, COLORADO (USA)

The 2B Technologies Model 306 Ozone Calibration Source is a portable source of ozone that allows you to calibrate any ozone monitor - not just those manufactured by 2B Tech. The instrument scrubs ozone from ambient air and produces any mixing ratio of ozone in the range 30 to1,000 ppbv. The desired ozone concentration is chosen from the ...

Palintest - Model PT 243 - Ozone Meter

by Industrial Test Systems, Inc.     based in Rock Hill, SOUTH CAROLINA (USA)

The Palintest1000 Ozone Meter provides a simple means of measuring ozone residuals up to a level of 2.0 mg/L. When used in conjunction with DPD eXact® StripsTM, it provides a level of simplicity and accuracy unrivalled in a portable, hand-held instrument. The Palintest1000 Ozone Meter is ideal for every application. The instrument is equally ...

Ambient Ozone Monitor

by Ozone Water Systems, Inc.     based in Phoenix, ARIZONA (USA)

The OWS Ambient Ozone Monitor is not an ordinary ozone monitor that only analyzes ambient ozone concentrations of the surrounding atmosphere. It has many advantages, but the most important is that it works as a safety device - not just an analytical device.

DULCOTEST - Ozone Sensors

by ProMinent Group - ProMinent GmbH     based in Heidelberg, GERMANY

DULCOTEST Ozone sensors are designed for a measuring range of 0 to 2 mg/l. They are also used in connection with ProMinent Ozone generation plants.

Sabio - Model 2030 - Portable Ozone Photometer

by Sabio Instruments, LLC     based in Georgetown, TEXAS (USA)

The Model 2030 is a portable Ozone Photometer audit transfer standard that is ideal for calibrating ambient air monitoring ozone analyzers and ozone generators. Using Beer-Lambert's Law, the Ozone photometer measures the amount of UV light attenuated at 254nm across a sample path. The unit alternates the ozone sample with a sample that has the ...

Model OG-3 - Ozone Source Calibrator

by Spectrex Corporation     based in Redwood City, CALIFORNIA (USA)

The OG-3 ozone source calibrator is for calibration verification and simple approximate calibration of Eco Sensors ozone instruments. It is available in either of two outputs: .1 ppm or 1 ppm. The OG-3 is powered by an AC adapter supplying 12 VDC. The OG-3 uses a precision quartz UV lamp ozone generator. Its output is adjusted in our laboratory by ...

InPro - Model 6800 - Polarographic Oxygen Sensor

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

METTLER TOLEDO's 'Advanced Line' dissolved oxygen sensors are specifically designed for reliable in-line measurement in processes under sterile, hygienic conditions. InPro6800 sensors have been developed and manufactured in accordance with the most precise surface treatment standards to comply fully with EHEDG and FDA flat-surface recommendations ...

High Purity Dissolved Oxygen Sensors

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

The high-performance DO sensor provides especially high accuracy and fast down-scale response and is used for most applications. The long life sensor can operate several years without any internal maintenance and is not affected by dissolved hydrogen. It is used primarily in stator cooling and nuclear power plant applications. The sensors for M800 ...

InPro - Model 6900(i) - Trace Polarographic Oxygen Sensor

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

METTLER TOLEDO’s InPro6900i is the intelligent counterpart for the InPro6900, the proven standard especially in food and beverage applications for low oxygen concentrations. The special electrode design with guard ring around the cathode together with the larger surface of the cathode allows for measurement down to 1ppb dissolved oxygen.

InPro - Model 6850i - Polarographic Oxygen Sensor

by Mettler - Toledo Int. Inc     based in Greifensee, SWITZERLAND

METTLER TOLEDO’s InPro6850i as intelligent all-rounder uses the new 3-electrode system. A separate platinum anode increases the signal stability especially in to low oxygen level.

Need help finding the right suppliers?

Let the XPRTs do the work for you