Particulate Monitoring Equipment in Arizona

216 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Particulate Monitoring ×

  • Location: USA ×

  • Location: Arizona ×

Particulates

by GrayWolf Sensing Solutions

Use the handheld GW-3016A as a stand-alone, 6 channel, color display particle counter or interface it to GrayWolf DirectSense, AdvancedSense and WolfPack monitors. Thermo Scientific pDR particulate concentration meters may also be interfaced. Display and log particulates right on the GrayWolf instrument or mobile PC, while adding photos, text or ...

Marple - Model Series 290 - Personal Cascade Impactor

by New Star Environmental Inc.

The Marple Series 290 Personal Cascade Impactor is designed to be personally worn by the worker, establishing accurate aerodynamic particle size distributions from 0.52 to 21.3 microns.

Dekati - Model DGI - Gravimetric Impactor

by Particle Instruments, LLC

A cascade impactor with cutpoints of 2.5, 1.0, 0.5 and 0.2 microns and a back-up filter. The particles are collected on Ø47 mm filters with sample flow rate of 70 lpm. DGI is typical used in combustion measurements including automotive emission testing, but it is can be applied to any measurements where particles in its operational range ...

Model TE-20-800 - Ambient (Non-Viable) Eight-Stage Cascade Impactors

by Tisch Environmental Inc.

Eight Stage Ambient Sampler System Includes: 8 Aluminum Orifice Stages, 8 Stainless Steel Collection Plates, Back up 81mm Filter Holder. 11 Silicone O-Ring Gaskets, Vacuum Pump Assembly and Carrying Case complete.

BioStage - Single-Stage Viable Cascade Impactor

by SKC Inc.

The BioStage single-stage cascade impactor operates on the principle of inertial impaction and meets NIOSH and ACGIH recommendations for sampling indoor and outdoor air for viable microorganisms, including bacteria, and fungi. Made of precision-tooled aluminum, the sampler contains a jet classification stage and base plate precision-threaded ...

Ecotech - Model ACS 1000 - Aerosol Conditioning System

by Ecotech Pty Ltd

The hygroscopic properties of aerosols are an important parameter to assess in order to accurately model the effect of aerosols on the earth’s radiative balance. By exposing the aerosol to different relative humidity, Ecotech’s Aerosol Conditioning System (ACS) enables these properties to be measured by a wide range of instruments.

8-Stage Non-Viable Impactor

by New Star Environmental Inc.

The Eight Stage Non-Viable Sampler is a multi-stage, multi-orifice cascade impactor designed to measure the aerodynamic size distribution and mass concentration of solid particulates and liquid aerosols directly.

Two Stage Viable Impactor

by New Star Environmental Inc.

The Two Stage Viable Particle Sampler is a multi-orifice cascade impactor that is used whenever a size distribution is not required and only respirable-nonrespirable segregation or total counts are needed.

2000 MicroFlow Sensor

by Georg Fischer Signet LLC

The Signet 2000 MicroFlow Sensor is constructed from PPS which provides high material strength. The 2000 offers two flow ranges starting at 0.03 or 0.7 gpm, for clean process liquids, regardless of fluid color or opacity. This sensor can be connected to flexible tubing or rigid pipe, and uses standard hardware for mounting. Only one moving part ...

Need help finding the right suppliers?

Let the XPRTs do the work for you