Soil Monitoring Equipment

1115 Results found
Only show results in Virginia?
OK
  • Category: Monitoring & Testing ×

  • Subcategory: Soil Monitoring ×

Davis - Stainless Steel Temperature Probe with Two-Wire Termination

by Davis Instruments Corp.     based in Hayward, CALIFORNIA (USA)

Measure temperature of air, soil, or water with this multi-purpose temperature probe. Add up to four probes to a single Leaf & Soil Moisture/Temperature Station. Or add to Vantage Connect and use in place of Vantage Connect's internal temperature sensor. Great option for measuring water or soil temperature without adding another station.

Kelway Soil pH and Moisture Meter

by Forestry Suppliers, Inc.     based in Jackson, MISSISSIPPI (USA)

A sensitive electrode measures pH values from 3.5 to 8, soil moisture from 0 to 100%. Requires no chemical, distilled water, or outside electric power source. Numerous readings can be easily taken over large area. 6-1/2ýL. Leather-like case with belt loop and full instructions included. pH Accuracy: ±0.2. Moisture accuracy: ±10%.

Materials Handling Machinery

by Blackthorn Environmental Ltd     based in Chichester, UNITED KINGDOM

Exhaust emissions matter in the materials handling sector for two reasons. Firstly, vehicles such as forklift trucks are often used in confined spaces, and this causes toxic substances to build up and exceed the safe or permitted levels for the driver or other employees.

Model BW 124 DH - Single Drum Roller

by BOMAG (Great Britain) Ltd- FAYAT Group     based in Maidstone, UNITED KINGDOM

Fields of application: Minor works and medium-size compaction duties in road construction, car parks, trenches and backfill. D-series models are suitable for granular materials (sand, gravel, crushed rock), semi-cohesive soils and hydraulically bound materials. PD-series models are primarily used on cohesive soils with high water contents. All BW ...

Model Th2 - Soil Temperature Probe

by Umweltanalytische Mess-Systeme GmbH (UMS)     based in Munich, GERMANY

The durable, water proof temperature probe for soils, fluids, gases. The thin body and sharpened tip reduce the soil disturbance when installed and ensures a good thermal contact to the soil. A heat conducting filling inside improves the thermal conductivity from the casing to the probe - for a fast response punctual temperature pick-up and ...

SAM (Soil Anchor Monitor)

by S3 Instruments     based in ONTARIO (CANADA)

SAM measure changes in anchor force. Pre-stressed soil and rock anchors are widely used in civil engineering to resist the horizontal pressures acting on retaining structures. With time, anchor force may decrease due to relaxation and creep. As a result, anchored elements may displace excessively and eventually fail. Therefore, it is extremely ...

Bio-Ion - Model BASIC - Soil Testing Laboratory

by Pike Agri-Lab Supplies, Inc.     based in Jay, MAINE (USA)

All the materials to create a small professional soil testing laboratory to determine major plant nutrient availability. The Bio-Ion Basic soil testing lab is the kit that we at Pike Agri-Lab supplies have put together to test the availability (to rootlets) of the major plant nutrients of the soil. It contains all the equipment to create a small ...

Hydrex Spill Containment

by Hydrex (Pty) Ltd     based in Sandton, SOUTH AFRICA

Hydrex geo membranes provide durable containment solutions for the prevention of leaching and the containment of hazardous liquids. Spill containment liners may vary depending on the type of chemical or liquid that needs to be contained.

BAT - Piezometer

by BAT Geosystems AB     based in Vallentuna, SWEDEN

BAT Piezometer is an innovative and proven technology for pore pressure measurements, which has been on the market for more than twenty years. Through the years BAT has gained a lot of experience within the field of pore pressure measurements, which we share with our clients to determine the best instrumentation to meet the specific needs for ...

Model 3400 - Semiconductor Piezometers

by Geokon Inc     based in Lebanon, NEW HAMPSHIRE (USA)

The Model 3400 Semiconductor Piezometers and Pressure Transducers are intended for dynamic measurements of fluid and/or pore water pressures in standpipes, boreholes, embankments, pipelines, pressure vessels, reservoirs, etc. They are also used for static pressure movement where the readout system is incompatible with vibrating wire type ...

Need help finding the right suppliers?

Let the XPRTs do the work for you