Spectrometry Equipment in New Jersey

98 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Spectrometry ×

  • In: USA ×

  • In: New Jersey ×

Model DT-500 - On-Line Acoustic & Electroacoustic Spectrometer

by Dispersion Technology Inc.     based in Bedford Hills, NEW JERSEY (USA)

This instrument is intended for on-line process monitoring and quality control applications. It can continuously measure Particle distribution and/or Zeta potential and/or Solid Content and/or Conductivity as well as the model DT-1202 Acoustic and Electroacoustic spectrometer, but in a  continuous On-Line mode. It comes packaged in a rugged ...

Agilent - Model 7900 - Inductively Coupled Plasma - Mass Spectrometer

by Agilent Technologies, Inc.     Distributor in NEW JERSEY (USA)

Raise your expectations—the new Agilent 7900 ICP-MS opens up a new dimension in quadrupole ICP-MS. With 10x higher matrix tolerance, 10x wider dynamic range and 10x better signal to noise than the world’s bestselling 7700 ICP-MS Series, plus software so powerful that it can write your methods for you, the Agilent 7900 ICP-MS redefines ...

Cartridge Heaters

by Scientific Instrument Services Inc.     based in Ringoes, NEW JERSEY (USA)

These low- and high- density cartridge heaters provide concentrated heat in limited spaces. They are ideal for GC/MS transfer line heater blocks as well as jet separator heater blocks or sample heaters. UL Recognized and CSA Certified.

Thermo/Finnigan - Model MAT 4000 - Platinum Resistance Thermometer

by Scientific Instrument Services Inc.     based in Ringoes, NEW JERSEY (USA)

This platinum resistance thermometer for the Finnigan 4000 replaces Finnigan #00007-89210.

Agilent - Model 7010 Series - Triple Quadrupole GC/MS System

by Agilent Technologies, Inc.     Distributor in NEW JERSEY (USA)

The Agilent 7010 Triple Quadrupole GC/MS provides the industry’s first attogram detection limits in Electron Ionization (EI) mode. The 7010 GC/MS system’s 0.5 fg OFN Instrument Detection Limit (IDL) (preliminary) is demonstrated at installation verifying unmatched ALS, GC and MS performance. Its high-efficiency EI source produces at ...

Specac Selector - Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS)

by Specac Limited     Office in Swedesboro, NEW JERSEY (USA)

The Specac Selector™ is a flexible Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) Accessory for analysis of powdered and solid samples. In its standard configuration it allows ambient sample analysis, or it can be used with the Specac Selector™ Environmental Chamber option for vacuum, pressure, and ...

Specac - Model Minidiff Plus - Diffuse Reflectance Accessory for Routine Analysis

by Specac Limited     Office in Swedesboro, NEW JERSEY (USA)

The Specac Minidiff Plus Diffuse Reflectance Accessory allows economic and high quality DRIFTS (Diffuse Reflectance Infrared Fourier Transform Spectroscopy) analysis of a wide variety of powders and solid samples. Typically, a small amount of sample is ground with KBr powder for analysis. Applications include characterisation of polymers, ...

Specac - Environmental Chamber for Selector Diffuse Reflectance Accessory

by Specac Limited     Office in Swedesboro, NEW JERSEY (USA)

Specac offers an Environmental Chamber designed for use with the Selector™ Diffuse Reflectance Accessory. This Environmental Chamber extends the sampling capabilities of the Selector™ by allowing the study of a diffusely reflecting sample at temperatures up to 800°C and pressures from vacuum (0.001 Torr) to 500 psi. Solid or powder ...

Specac Gateway - ATR Accessory Kit

by Specac Limited     Office in Swedesboro, NEW JERSEY (USA)

Specac’s Gateway™ ATR Accessory Kit is an economical multi-reflection horizontal ZnSe ATR accessory. With high-performance transfer optics and anti-reflection coated ZnSe crystals as standard, high optical throughput is achieved to facilitate an excellent standard of FTIR ATR spectral data.

Specac - Quest ATR Accessory

by Specac Limited     Office in Swedesboro, NEW JERSEY (USA)

The Quest ATR Accessory is a performance single-reflection ATR accessory from Specac designed for laboratory spectroscopic sample analysis in the mid- and far-infrared. With innovative optical design and durable monolithic diamond ATR crystal option, this sets the benchmark in performance and value for ATR spectroscopy.

Need help finding the right suppliers?

Let the XPRTs do the work for you