remote sensing Equipment in New Jersey

Serving New Jersey | Near New Jersey
14 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Telemetry ×

  • Keyword: remote sensing ×

  • Location: USA ×

  • Location: New Jersey ×

Particles Plus - Model 4510 - Remote Particle Counter (0.5 µm @ 1.0 CFM)

by Particles Plus, Inc.     based in Stoughton, MASSACHUSETTS (USA)

The Particles Plus 4510 Remote Particle Counter measures 0.5 µm to 25.0 µm with a flow rate of 1.0 CFM (28.3 LPM). This instrument has a built-in vacuum pump and it can be used for continuous mode monitoring applications without the necessity of running a vacuum system to the device. 60% smaller than any other instrument in its class, ...

AQ510 windfinder

by Ammonit Measurement GmbH     based in Berlin, GERMANY

Ammonit AQ510 windfinder has been developed for wind site assessment as well as wind farm monitoring. The Sodar system is easy to use. Conveniently position the system with the help of the integrated tilt sensor and GPS mo-dule at your selected site and switch it on. You instantly collect wind data. It has never been easier to measure wind.The ...

ZephIR 300

by Ammonit Measurement GmbH     based in Berlin, GERMANY

LiDAR systems are increasingly being used in the wind industry for site assessment, power curve measurement as well as wind farm monitoring. As Trusted Service Provider, Ammonit offers the leading ZephIR Lidar systems: ZephIR 300 for ground-based installations and ZephIR DM for turbine-mounted applications. According to the clear and auditable ...

THERMOX - Model LinkBus RIMS - Remote Instrument Monitoring System

by Ametek Process Instruments - THERMOX     based in Pittsburgh, PENNSYLVANIA (USA)

The LinkBus Remote Instrument Monitoring System (LinkBus RIMS) from AMETEK addresses the limitations of traditional maintenance programs and frees up resources, making them available to give attention where it is most needed. Maintenance and performance personnel now have easy access to all the analyzers’ vital signs from their desk computer ...

Model 2852-FCM - Remote Mounted Foam Control Monitor

by Arjay Engineering Ltd.     based in Oakville, ONTARIO (CANADA)

Reliable monitoring of foaming conditions in process applications. The sensing probe is tuned to the normal operating conditons of the gaseous or air phase in your process. The intrusion of foam around the probe will cause a capactiance change that is monitored by the remote controller. Variatons in foam levels will result in a porportional ...

Model 2852-OWI - Remote Mounted Oil/Water Interface Monitor

by Arjay Engineering Ltd.     based in Oakville, ONTARIO (CANADA)

The sensing probe continuously monitors the capacitance of the inserted probe. As the interface or emulsion layer (rag layer) crosses over the probe, a proportional 4-20 mA output is provided. Typical applications include oil water separators, oil/water knock-out tanks, treater trains and decanting tanks. The 2852-OWI sensing probe monitors the ...

ACME - Model CEW(LS) Series - Wireless MultiSet Gas Detection and Control System

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

Scalable system using Wireless Sensor-Transmitters communicating with a central Control Panel as well as Remote Wireless Relay Modules to operate ventilation equipment & Remote Alarms. FCC/IC/ETSI/CE approved RF modules for up to 256 remote sensor-transmitters & up to 96 Remote Relay Modules.- Minimal installation cost - virtually no field ...

ACME - Model CEW Series - Wireless MultiSet Gas Detection and Control System

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

The CEW Series centralized detection and control system can monitor up to 32 remote detectors via a wireless RS-485 communication link at 900MHz or 2.4GHz, reducing installation costs. While typically used for enclosed vehicular facilities where CO and NO2 (for Diesel fumes) are the gases detected, the panel can also be configured to monitor CO2, ...

Wireless Temperature Sensor

by Thermometrics Corporation     based in Northridge, CALIFORNIA (USA)

Wireless sensor networks are providing tremendous benefit for a number of industries. The ability to add remote sensing points, without the cost of running wires, results in numerous benefits including energy and material savings, process improvements, labor savings, and productivity increases.

ACME - Model CEW4 Series - Wireless Multiset Gas Detection and Control System

by Acme Engineering Prod. Ltd.     based in Montreal, QUEBEC (CANADA)

The CEW4Quadset system monitors up to 4 remote sensors wirelessly over a 900MHz or 2.4GHz network. This results in substantial savings in labor and material costs during installation. While typically used for enclosed parking facilities where CO and NO2 (for Diesel fumes) are the gases detected, the CEW4 can monitor other toxic gases such as ...

Need help finding the right suppliers?

Let the XPRTs do the work for you