Water Monitoring Equipment in Massachusetts

Serving Massachusetts | Office in MassachusettsNear Massachusetts
2063 Results found
  • Category: Monitoring & Testing ×

  • Subcategory: Water Monitoring ×

  • Location: USA ×

  • Location: Massachusetts ×

Model FLO3 Series - Float Switches

by Hycontrol Limited     based in Worcester, UNITED KINGDOM

Float Switches are inexpensive and efficient liquid level sensors. They are simple to install and designed for trouble free operation over a long life. HYC-FL03 is a polypropylene float switch molded to a 3-core cable in CPE synthetic rubber, or PVC. Actuation is by Microswitch and roller ball arrangement within the switch, eliminating all heavy ...

Freytech - Model ecoGrease Series - High Efficiency Grease And Cooking Oil Separator

by Freytech Inc.     based in Miami, FLORIDA (USA)

Most grease traps on the market are not efficient, are messy and time consuming to maintain. Now, for the first time, our grease separation technology allows the operator to not only size the system strictly by flow rate but to also achieve specific discharge removal efficiencies. The EcoGrease interceptor separates liquid, coagulating animal and ...

Arsenic Quick - Inorganic Arsenic Test Kits for Water Quality Testing (481396)

by Industrial Test Systems, Inc.     based in Rock Hill, SOUTH CAROLINA (USA)

Arsenic Quick™ for water quality testing was designed to give the user accurate results without sacrificing cost and time. Designed using cutting-edge chemistry, Arsenic Quick™ reports results in only 12 minutes. Additionally, there are no dangerous chemicals needed to run this kit to test water quality. With only one simple test ...

Model OBS-3+ - Turbidity Sensor

by Campbell Scientific, Inc.     based in Logan, UTAH (USA)

The OBS-3+ Turbidity Monitor is a submersible probe, part of our OBS® line of products that use a backscatter method to measure turbidity. The OBS-3+ operates in the range of 0 to 4000 NTU. It replaces the OBS3 on our price lists. The OBS-3+ can be used in several applications, ranging from water quality in freshwater rivers and streams ...

Float Switches

by AMETEK- Drexelbrook     based in Horsham, PENNSYLVANIA (USA)

Reliable mechanical switch for use in clean liquids; a general purpose point level device at an economical price. Simple installation and reliable operation make float switches a good choice for many point level applications.Single- and multi-point products available. Applications to 250ºF and vacuum through 500 psi. No calibration required.

Oakton - Model Acorn DO 6 - Meter

by Forestry Suppliers, Inc.     based in Jackson, MISSISSIPPI (USA)

Great for testing water quality in wastewater, surface water, ground water, or drinking water. A clear LCD display shows results in ppm or mg/L with enunciators to aid in use and troubleshooting. Six simple buttons allow for freezing readings, toggling between display units and temperature results, setup, calibration, and automatic barometric and ...

Fluorat - Model 02 - Liquid Analyzers

by Lumex Instruments Group     based in St. Petersburg, RUSSIA

FLUORAT-02, which was a pioneering instrument developed by LUMEX and have gained a wide use in many analytical laboratories, makes a base for a large number (more than 50 certified methods) of analytical fluorometric, photometric, and chemoluminometric techniques for analysis of water, food, emission analysis. Such a versatility allows an analyst ...

Oakton¨ Acornª SALT 6 Meter

by Forestry Suppliers, Inc.     based in Jackson, MISSISSIPPI (USA)

Ideal for monitoring salt levels in brines and aquaculture systems, this meter provides accurate, wide ranging salinity measurements. The custom conductivity-to-TDS conversion curve ensures the highest possible accuracy. The meter also features automatic temperature compensation, easy push button operation, hold function, and automatic shutoff ...

LaMotte Salt Water Test Kit

by Forestry Suppliers, Inc.     based in Jackson, MISSISSIPPI (USA)

Provides equipment to monitor nine parameters including ammonia nitrogen, nitrate nitrogen, nitrite nitrogen, pH, alkalinity, carbon dioxide, dissolved oxygen, salinity, and temperature. Reagents, labware, and accessories are mounted in ethafoam for convenient test selection and portability. Short form lid instructions are available for quick ...

Sigrist OilGuard - Oil-in-Water Monitors

by Peak Process Controls, Inc.     based in Newmarket, ONTARIO (CANADA)

The Sigrist OilGuard operates on the proven UV fluorescence measuring principle. Aromatic hydrocarbons possess the ability to emit visible light when radiated with UV light. This makes it possible to detect oil-in-water in the low ppm range even if the water is very turbid. The non-contact type flow cell uses a falling stream method of ...

Need help finding the right suppliers?

Let the XPRTs do the work for you